diff mbox series

[Openvpn-devel] multi: skip IPv4 logic in multi_select_virtual_addr() if no pool is configured

Message ID 20200610084549.4028-1-a@unstable.cc
State Accepted
Headers
Series [Openvpn-devel] multi: skip IPv4 logic in multi_select_virtual_addr() if no pool is configured |

Commit Message

Antonio Quartulli June 9, 2020, 10:45 p.m. UTC 
  When no IPv4 pool is configured (but we have an IPv6 pool
only), the multi_select_virtual_addr() function will spit
a warning when allocating an address for a new client.
This happens because the code will check for some IPv4
bits and will see that they are missing.

However, these bits are not really important, because in
this use case we don't want to configure any IPv4 address
at all.

For this reason it is safe to wrap this entire logic in
an if-block that just does not execute when no IPv4 pool
is configured.

This avoids the warning and will also avoid any other
hidden side effect.

Reported-by: Gert Doering <gert@greenie.muc.de>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
---
 src/openvpn/multi.c | 50 ++++++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 23 deletions(-)

Comments

Gert Doering June 10, 2020, 12:36 a.m. UTC | #1 
Acked-by: Gert Doering <gert@greenie.muc.de>

The patch is quite trivial - if seen with "git show -w" :-) - it basically
just encapsulates the whole "the pool has returned something, how does
it need to be wrapped for pushing out?" into "is there an IPv4 pool at all?".

Tested on the t_server setup - warnings are gone, and ccd/ifconfig-push still
works (which it should, on no-v4-pool or no-pool-at-all setups).

Your patch has been applied to the master branch.

commit 9002885bd8a10d9375dc4f0baf2df05395c86f1a
Author: Antonio Quartulli
Date:   Wed Jun 10 10:45:49 2020 +0200

     multi: skip IPv4 logic in multi_select_virtual_addr() if no pool is configured

     Signed-off-by: Antonio Quartulli <a@unstable.cc>
     Acked-by: Gert Doering <gert@greenie.muc.de>
     Message-Id: <20200610084549.4028-1-a@unstable.cc>
     URL: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg20012.html
     Signed-off-by: Gert Doering <gert@greenie.muc.de>


--
kind regards,

Gert Doering
diff mbox series

Patch

diff --git a/src/openvpn/multi.c b/src/openvpn/multi.c
index 2fbbe9ec..99472f14 100644
--- a/src/openvpn/multi.c
+++ b/src/openvpn/multi.c
@@ -1504,36 +1504,40 @@  multi_select_virtual_addr(struct multi_context *m, struct multi_instance *mi)
                   ? print_in6_addr( remote_ipv6, 0, &gc )
                   : "(Not enabled)") );
 
-            /* set push_ifconfig_remote_netmask from pool ifconfig address(es) */
-            mi->context.c2.push_ifconfig_local = remote;
-            if (tunnel_type == DEV_TYPE_TAP || (tunnel_type == DEV_TYPE_TUN && tunnel_topology == TOP_SUBNET))
+            if (mi->context.options.ifconfig_pool_defined)
             {
-                mi->context.c2.push_ifconfig_remote_netmask = mi->context.options.ifconfig_pool_netmask;
-                if (!mi->context.c2.push_ifconfig_remote_netmask)
+                /* set push_ifconfig_remote_netmask from pool ifconfig address(es) */
+                mi->context.c2.push_ifconfig_local = remote;
+                if (tunnel_type == DEV_TYPE_TAP || (tunnel_type == DEV_TYPE_TUN && tunnel_topology == TOP_SUBNET))
                 {
-                    mi->context.c2.push_ifconfig_remote_netmask = mi->context.c1.tuntap->remote_netmask;
+                    mi->context.c2.push_ifconfig_remote_netmask = mi->context.options.ifconfig_pool_netmask;
+                    if (!mi->context.c2.push_ifconfig_remote_netmask)
+                    {
+                        mi->context.c2.push_ifconfig_remote_netmask = mi->context.c1.tuntap->remote_netmask;
+                    }
                 }
-            }
-            else if (tunnel_type == DEV_TYPE_TUN)
-            {
-                if (tunnel_topology == TOP_P2P)
+                else if (tunnel_type == DEV_TYPE_TUN)
                 {
-                    mi->context.c2.push_ifconfig_remote_netmask = mi->context.c1.tuntap->local;
+                    if (tunnel_topology == TOP_P2P)
+                    {
+                        mi->context.c2.push_ifconfig_remote_netmask = mi->context.c1.tuntap->local;
+                    }
+                    else if (tunnel_topology == TOP_NET30)
+                    {
+                        mi->context.c2.push_ifconfig_remote_netmask = local;
+                    }
                 }
-                else if (tunnel_topology == TOP_NET30)
+
+                if (mi->context.c2.push_ifconfig_remote_netmask)
                 {
-                    mi->context.c2.push_ifconfig_remote_netmask = local;
+                    mi->context.c2.push_ifconfig_defined = true;
+                }
+                else
+                {
+                    msg(D_MULTI_ERRORS,
+                        "MULTI: no --ifconfig-pool netmask parameter is available to push to %s",
+                        multi_instance_string(mi, false, &gc));
                 }
-            }
-
-            if (mi->context.c2.push_ifconfig_remote_netmask)
-            {
-                mi->context.c2.push_ifconfig_defined = true;
-            }
-            else
-            {
-                msg(D_MULTI_ERRORS, "MULTI: no --ifconfig-pool netmask parameter is available to push to %s",
-                    multi_instance_string(mi, false, &gc));
             }
 
             if (mi->context.options.ifconfig_ipv6_pool_defined)