[Openvpn-devel,v2,2/8] doc/man: Replace old man page with generated man page

Message ID 20200716225338.611-3-davids@openvpn.net
State Accepted
Headers show
Series
  • man-page overhaul project - round 2
Related show

Commit Message

David Sommerseth July 16, 2020, 10:53 p.m.
The doc/openvpn.8 and doc/openvpn.8.html files are now being removed from the
git tree, as it will be generated from the doc/openvpn.8.rst file using
python-docutils.

An additional dist-hook is added so these files are generated
automatically when source tarballs are generated for releases.  This
means users compiling directly from the source tarball will not need
python-docutils installed.

Signed-off-by: David Sommerseth <davids@openvpn.net>
---
 .gitignore      |    1 +
 INSTALL         |    3 +-
 configure.ac    |   15 +-
 doc/Makefile.am |   34 +-
 doc/README.man  |   23 +
 doc/openvpn.8   | 7659 -----------------------------------------------
 6 files changed, 61 insertions(+), 7674 deletions(-)
 create mode 100644 doc/README.man
 delete mode 100644 doc/openvpn.8

Comments

Gert Doering July 17, 2020, 8:02 a.m. | #1
Acked-by: Gert Doering <gert@greenie.muc.de>

I have not tested the actual docutils / openvpn.8 generation (Samuli will 
complain loudly if tarball making doesn't work anymore, so that *will* 
see testing).  Generally it looks sane.

This condition looks a bit fishy, though...

 +AM_CONDITIONAL([HAVE_PYDOCUTILS], [test "${RST2MAN}" -a "${RST2HTML}"])

not sure what that will do in a POSIX shell.

Maybe this shouldn't be conditional either

 +if HAVE_PYDOCUTILS
  dist_noinst_DATA += openvpn.8

because it will lead to "tarballs randomly contain openvpn.8 or not, 
depending on whether docutils are around" - "make dist" should behave
consistently, and if there are no docutils, I think it should fail, not
silently leave out files.


URL pointed to SF again due to patch size.

Your patch has been applied to the master branch.

commit 51f2e4b0a4e09382dbc1b10b6a8b08febc8d293f
Author: David Sommerseth
Date:   Fri Jul 17 00:53:32 2020 +0200

     doc/man: Replace old man page with generated man page

     Signed-off-by: David Sommerseth <davids@openvpn.net>
     Acked-by: Gert Doering <gert@greenie.muc.de>
     Message-Id: <20200716225338.611-3-davids@openvpn.net>
     URL: https://sourceforge.net/p/openvpn/mailman/message/37063373/
     Signed-off-by: Gert Doering <gert@greenie.muc.de>


--
kind regards,

Gert Doering
David Sommerseth July 17, 2020, 10:04 a.m. | #2
On 17/07/2020 10:02, Gert Doering wrote:
> Acked-by: Gert Doering <gert@greenie.muc.de>
> 
> I have not tested the actual docutils / openvpn.8 generation (Samuli will 
> complain loudly if tarball making doesn't work anymore, so that *will* 
> see testing).  Generally it looks sane.
> 
> This condition looks a bit fishy, though...
> 
>  +AM_CONDITIONAL([HAVE_PYDOCUTILS], [test "${RST2MAN}" -a "${RST2HTML}"])
> 
> not sure what that will do in a POSIX shell.

Hmm ... whoops.  That should probably have been

    test -n "${RST2MAN}" -a -n "${RST2HTML}"

Not sure how that passed during my own tests.  I tested it on a various of
boxes, but I only have Linux distros easily available.

> Maybe this shouldn't be conditional either
> 
>  +if HAVE_PYDOCUTILS
>   dist_noinst_DATA += openvpn.8
> 
> because it will lead to "tarballs randomly contain openvpn.8 or not, 
> depending on whether docutils are around" - "make dist" should behave
> consistently, and if there are no docutils, I think it should fail, not
> silently leave out files.

The intention is that the tarball contains prebuilt openvpn.8 and openvpn.html
files, which is generated by "make {dist,distcheck}".  If these files exists,
they will not be rebuilt unless explicitly removed.  So most users building
from the source tarball should not notice any difference from prioer OpenVPN
releases.  This is what the additional dist-hook rule in doc/Makefile.am does;
this is run right before the copied source tree is put into a tarball.

The challenge is that it must be a conditional to actually pass ./configure -
even when built from source tarballs.  Otherwise python-docutils will be a
build dependency.  We discussed this at the Trento Hackathon and you where
skeptic to require a Python stack to be installed to build OpenVPN (as that
stack is not a common system dependency in the non-Linux world).  So we agreed
we will ship pre-built man/html files in the source tarballs.

However, to do the "make {dist,distcheck}" from the *git repo*,
python-docutils need to be a mandatory dependency - because we don't check in
the prebuilt openvpn.8 and openvpn.html files into the git repo.

This logic could probably contains some flaws and can be further improved, but
I figured we need to get this tested on a broader set of use cases and
OS/distros to better see which annoyances which hits us.
Gert Doering July 17, 2020, 1:16 p.m. | #3
Hi,

On Fri, Jul 17, 2020 at 12:04:30PM +0200, David Sommerseth wrote:
> On 17/07/2020 10:02, Gert Doering wrote:
> > Acked-by: Gert Doering <gert@greenie.muc.de>
> > 
> > I have not tested the actual docutils / openvpn.8 generation (Samuli will 
> > complain loudly if tarball making doesn't work anymore, so that *will* 
> > see testing).  Generally it looks sane.
> > 
> > This condition looks a bit fishy, though...
> > 
> >  +AM_CONDITIONAL([HAVE_PYDOCUTILS], [test "${RST2MAN}" -a "${RST2HTML}"])
> > 
> > not sure what that will do in a POSIX shell.
> 
> Hmm ... whoops.  That should probably have been
> 
>     test -n "${RST2MAN}" -a -n "${RST2HTML}"
> 
> Not sure how that passed during my own tests.  I tested it on a various of
> boxes, but I only have Linux distros easily available.

OK, there is something else - the buildbots are now failing with

Missing python-docutils - skipping man/html page generation
Missing python-docutils - skipping man page generation
cp: cannot stat './openvpn.8.html': No such file or directory
Makefile:686: recipe for target 'distdir' failed


"if it knows that it's not doing these, it shouldn't try to copy it
somewhere"

Can you have a look please, while fixing the "test" thing above?

> > Maybe this shouldn't be conditional either
> > 
> >  +if HAVE_PYDOCUTILS
> >   dist_noinst_DATA += openvpn.8
> > 
> > because it will lead to "tarballs randomly contain openvpn.8 or not, 
> > depending on whether docutils are around" - "make dist" should behave
> > consistently, and if there are no docutils, I think it should fail, not
> > silently leave out files.
> 
> The intention is that the tarball contains prebuilt openvpn.8 and openvpn.html
> files, which is generated by "make {dist,distcheck}".  

Yes.  In full agreement.

What I worry is that if you run a "make dist" on a host that has no 
docutils, configure will notice this, and not add "openvpn.8" to 
"dist_noinst_DATA" - so it won't be built, not included in the tarball,
and the tarball is incomplete.

> If these files exists,
> they will not be rebuilt unless explicitly removed.  So most users building
> from the source tarball should not notice any difference from prioer OpenVPN
> releases.  This is what the additional dist-hook rule in doc/Makefile.am does;
> this is run right before the copied source tree is put into a tarball.
> 
> The challenge is that it must be a conditional to actually pass ./configure -
> even when built from source tarballs.  

Not sure I understand this.  If openvpn.8 is there, because it was tarball'ed,
why would this line above create a new dependency?

gert

Patch

diff --git a/.gitignore b/.gitignore
index 0d68ec4b..25d06235 100644
--- a/.gitignore
+++ b/.gitignore
@@ -49,6 +49,7 @@  version.sh
 msvc-env-local.bat
 config-msvc-local.h
 config-msvc-version.h
+doc/openvpn.8
 doc/openvpn.8.html
 /doc/doxygen/html/
 /doc/doxygen/latex/
diff --git a/INSTALL b/INSTALL
index a6a28630..de0eb518 100644
--- a/INSTALL
+++ b/INSTALL
@@ -227,7 +227,6 @@  ENVIRONMENT for ./configure:
   ROUTE       full path to route utility
   IPROUTE     full path to ip utility
   NETSTAT     path to netstat utility
-  MAN2HTML    path to man2html utility
   GIT         path to git utility
   SYSTEMD_ASK_PASSWORD
               path to systemd-ask-password utility
@@ -235,6 +234,8 @@  ENVIRONMENT for ./configure:
               Path of systemd unit directory [default=LIBDIR/systemd/system]
   TMPFILES_DIR
               Path of tmpfiles directory [default=LIBDIR/tmpfiles.d]
+  RST2MAN     Path to rst2man utility
+  RST2HTML    Path to rst2html utility
 
 ENVIRONMENT variables adjusting parameters related to dependencies
 
diff --git a/configure.ac b/configure.ac
index 53b7a967..45148892 100644
--- a/configure.ac
+++ b/configure.ac
@@ -354,7 +354,6 @@  AC_ARG_VAR([IFCONFIG], [full path to ipconfig utility])
 AC_ARG_VAR([ROUTE], [full path to route utility])
 AC_ARG_VAR([IPROUTE], [full path to ip utility])
 AC_ARG_VAR([NETSTAT], [path to netstat utility]) # tests
-AC_ARG_VAR([MAN2HTML], [path to man2html utility])
 AC_ARG_VAR([GIT], [path to git utility])
 AC_ARG_VAR([SYSTEMD_ASK_PASSWORD], [path to systemd-ask-password utility])
 AC_ARG_VAR([SYSTEMD_UNIT_DIR], [Path of systemd unit directory @<:@default=LIBDIR/systemd/system@:>@])
@@ -364,13 +363,21 @@  AC_PATH_PROGS([ROUTE], [route],, [$PATH:/usr/local/sbin:/usr/sbin:/sbin])
 AC_PATH_PROGS([IPROUTE], [ip],, [$PATH:/usr/local/sbin:/usr/sbin:/sbin])
 AC_PATH_PROGS([SYSTEMD_ASK_PASSWORD], [systemd-ask-password],, [$PATH:/usr/local/bin:/usr/bin:/bin])
 AC_CHECK_PROGS([NETSTAT], [netstat], [netstat], [$PATH:/usr/local/sbin:/usr/sbin:/sbin:/etc]) # tests
-AC_CHECK_PROGS([MAN2HTML], [man2html])
 AC_CHECK_PROGS([GIT], [git]) # optional
 AC_DEFINE_UNQUOTED([IFCONFIG_PATH], ["$IFCONFIG"], [Path to ifconfig tool])
 AC_DEFINE_UNQUOTED([IPROUTE_PATH], ["$IPROUTE"], [Path to iproute tool])
 AC_DEFINE_UNQUOTED([ROUTE_PATH], ["$ROUTE"], [Path to route tool])
 AC_DEFINE_UNQUOTED([SYSTEMD_ASK_PASSWORD_PATH], ["$SYSTEMD_ASK_PASSWORD"], [Path to systemd-ask-password tool])
 
+#
+#  man page generation - based on python-docutils
+#
+AC_ARG_VAR([RST2MAN], [path to rst2man utility])
+AC_ARG_VAR([RST2HTML], [path to rst2html utility])
+AC_CHECK_PROGS([RST2MAN], [rst2man])
+AC_CHECK_PROGS([RST2HTML], [rst2html])
+AM_CONDITIONAL([HAVE_PYDOCUTILS], [test "${RST2MAN}" -a "${RST2HTML}"])
+
 # Set -std=c99 unless user already specified a -std=
 case "${CFLAGS}" in
   *-std=*) ;;
@@ -1315,10 +1322,6 @@  if test "${enable_werror}" = "yes"; then
 	CFLAGS="${CFLAGS} -Werror"
 fi
 
-if test "${WIN32}" = "yes"; then
-	test -z "${MAN2HTML}" && AC_MSG_ERROR([man2html is required for win32])
-fi
-
 if test "${enable_plugin_auth_pam}" = "yes"; then
 	PLUGIN_AUTH_PAM_CFLAGS="${LIBPAM_CFLAGS}"
 	if test "${enable_pam_dlopen}" = "yes"; then
diff --git a/doc/Makefile.am b/doc/Makefile.am
index 95055dbb..5110ca52 100644
--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@@ -5,29 +5,47 @@ 
 #             packet encryption, packet authentication, and
 #             packet compression.
 #
-#  Copyright (C) 2002-2018 OpenVPN Inc <sales@openvpn.net>
+#  Copyright (C) 2002-2020 OpenVPN Inc <sales@openvpn.net>
 #  Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com>
 #
 
 MAINTAINERCLEANFILES = \
 	$(srcdir)/Makefile.in
 
-CLEANFILES = openvpn.8.html
-
 SUBDIRS = doxygen
 
 dist_doc_DATA = \
-	management-notes.txt
+	management-notes.txt openvpn.8.rst
 
 dist_noinst_DATA = \
 	README.plugins interactive-service-notes.rst
 
-if WIN32
+openvpn.8 :
+if HAVE_PYDOCUTILS
+	$(RST2MAN) $(srcdir)/$@.rst > $@
+else
+	@echo "Missing python-docutils - skipping man page generation"
+endif
+
+openvpn.8.html:
+if HAVE_PYDOCUTILS
+	$(RST2HTML) $(srcdir)/openvpn.8.rst > $@
+else
+	@echo "Missing python-docutils - skipping man/html page generation"
+endif
+
+if HAVE_PYDOCUTILS
 dist_noinst_DATA += openvpn.8
-nodist_html_DATA = openvpn.8.html
-openvpn.8.html: $(srcdir)/openvpn.8
-	$(MAN2HTML) < $(srcdir)/openvpn.8 > openvpn.8.html
+dist_html_DATA = openvpn.8.html
+
+# Failsafe - do not delete these files unless we can recreate them
+CLEANFILES = \
+	 openvpn.8 openvpn.8.html
+
+if WIN32
 else
 dist_man_MANS = openvpn.8
 endif
+endif
 
+dist-hook : openvpn.8 openvpn.8.html
diff --git a/doc/README.man b/doc/README.man
new file mode 100644
index 00000000..00a9c480
--- /dev/null
+++ b/doc/README.man
@@ -0,0 +1,23 @@ 
+
+man page documentation
+======================
+
+The man page content maintained in the openvpn.8.rst file and proper man and
+the html version of the man page are generated using python-docutils.  Both
+the man page and html file are generated during 'make dist' or 'make distcheck'
+and should be distributed inside the tarball by default.
+
+Users compiling OpenVPN from the tarball should not need to regenerate the
+man/html files unless the source file needs to be modified.
+
+Further information:
+
+* Python docutils project:
+  https://docutils.sourceforge.io/
+
+* Quickstart on .rst
+  https://docutils.sourceforge.io/docs/user/rst/quickstart.html
+
+* reStructuredText Markup Specifictaion (.rst)
+  https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html
+
diff --git a/doc/openvpn.8 b/doc/openvpn.8
deleted file mode 100644
index 03ae5ac5..00000000
--- a/doc/openvpn.8
+++ /dev/null
@@ -1,7659 +0,0 @@ 
-.\"  OpenVPN -- An application to securely tunnel IP networks
-.\"             over a single TCP/UDP port, with support for SSL/TLS-based
-.\"             session authentication and key exchange,
-.\"             packet encryption, packet authentication, and
-.\"             packet compression.
-.\"
-.\"  Copyright (C) 2002-2018 OpenVPN Inc <sales@openvpn.net>
-.\"
-.\"  This program is free software; you can redistribute it and/or modify
-.\"  it under the terms of the GNU General Public License version 2
-.\"  as published by the Free Software Foundation.
-.\"
-.\"  This program is distributed in the hope that it will be useful,
-.\"  but WITHOUT ANY WARRANTY; without even the implied warranty of
-.\"  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-.\"  GNU General Public License for more details.
-.\"
-.\"  You should have received a copy of the GNU General Public License along
-.\"  with this program; if not, write to the Free Software Foundation, Inc.,
-.\"  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-.\"
-.\" Manual page for openvpn
-.\"
-.\" SH section heading
-.\" SS subsection heading
-.\" LP paragraph
-.\" IP indented paragraph
-.\" TP hanging label
-.\"
-.\" .nf -- no formatting
-.\" .fi -- resume formatting
-.\" .ft 3 -- boldface
-.\" .ft -- normal face
-.\" .in +|-{n} -- indent
-.\"
-.\" Support macros - this is not present on all platforms
-.\" Continuation line for .TP header.
-.de TQ
-.  br
-.  ns
-.  TP \\$1\" no doublequotes around argument!
-..
-.\" End of TQ macro
-.TH openvpn 8 "28 February 2018"
-.\"*********************************************************
-.SH NAME
-openvpn \- secure IP tunnel daemon.
-.\"*********************************************************
-.SH SYNOPSIS
-.ft 3
-openvpn [ options ... ]
-.ft
-.\"*********************************************************
-.SH INTRODUCTION
-.LP
-OpenVPN is an open source VPN daemon by James Yonan.
-Because OpenVPN tries to
-be a universal VPN tool offering a great deal of flexibility,
-there are a lot of options on this manual page.
-If you're new to OpenVPN, you might want to skip ahead to the
-examples section where you will see how to construct simple
-VPNs on the command line without even needing a configuration file.
-
-Also note that there's more documentation and examples on
-the OpenVPN web site:
-.I http://openvpn.net/
-
-And if you would like to see a shorter version of this manual,
-see the openvpn usage message which can be obtained by
-running
-.B openvpn
-without any parameters.
-.\"*********************************************************
-.SH DESCRIPTION
-.LP
-OpenVPN is a robust and highly flexible VPN daemon.
-OpenVPN supports SSL/TLS security, ethernet bridging,
-TCP or UDP tunnel transport through proxies or NAT,
-support for dynamic IP addresses and DHCP,
-scalability to hundreds or thousands of users,
-and portability to most major OS platforms.
-
-OpenVPN is tightly bound to the OpenSSL library, and derives much
-of its crypto capabilities from it.
-
-OpenVPN supports
-conventional encryption
-using a pre\-shared secret key
-.B (Static Key mode)
-or
-public key security
-.B (SSL/TLS mode)
-using client & server certificates.
-OpenVPN also
-supports non\-encrypted TCP/UDP tunnels.
-
-OpenVPN is designed to work with the
-.B TUN/TAP
-virtual networking interface that exists on most platforms.
-
-Overall, OpenVPN aims to offer many of the key features of IPSec but
-with a relatively lightweight footprint.
-.\"*********************************************************
-.SH OPTIONS
-OpenVPN allows any option to be placed either on the command line
-or in a configuration file.  Though all command line options are preceded
-by a double\-leading\-dash ("\-\-"), this prefix can be removed when
-an option is placed in a configuration file.
-.\"*********************************************************
-.TP
-.B \-\-help
-Show options.
-.\"*********************************************************
-.TP
-.B \-\-config file
-Load additional config options from
-.B file
-where each line corresponds to one command line option,
-but with the leading '\-\-' removed.
-
-If
-.B \-\-config file
-is the only option to the openvpn command,
-the
-.B \-\-config
-can be removed, and the command can be given as
-.B openvpn file
-
-Note that
-configuration files can be nested to a reasonable depth.
-
-Double quotation or single quotation characters ("", '')
-can be used to enclose single parameters containing whitespace,
-and "#" or ";" characters in the first column
-can be used to denote comments.
-
-Note that OpenVPN 2.0 and higher performs backslash\-based shell
-escaping for characters not in single quotations,
-so the following mappings should be observed:
-
-.nf
-.ft 3
-.in +4
-\\\\       Maps to a single backslash character (\\).
-\\"       Pass a literal doublequote character ("), don't
-         interpret it as enclosing a parameter.
-\\[SPACE] Pass a literal space or tab character, don't
-         interpret it as a parameter delimiter.
-.in -4
-.ft
-.fi
-
-For example on Windows, use double backslashes to
-represent pathnames:
-
-.nf
-.ft 3
-.in +4
-secret "c:\\\\OpenVPN\\\\secret.key"
-.in -4
-.ft
-.fi
-
-For examples of configuration files,
-see
-.I http://openvpn.net/examples.html
-
-Here is an example configuration file:
-
-.nf
-.ft 3
-.in +4
-#
-# Sample OpenVPN configuration file for
-# using a pre\-shared static key.
-#
-# '#' or ';' may be used to delimit comments.
-
-# Use a dynamic tun device.
-dev tun
-
-# Our remote peer
-remote mypeer.mydomain
-
-# 10.1.0.1 is our local VPN endpoint
-# 10.1.0.2 is our remote VPN endpoint
-ifconfig 10.1.0.1 10.1.0.2
-
-# Our pre\-shared static key
-secret static.key
-.in -4
-.ft
-.fi
-.\"*********************************************************
-.SS Tunnel Options:
-.TP
-.B \-\-mode m
-Set OpenVPN major mode.  By default, OpenVPN runs in
-point\-to\-point mode ("p2p").  OpenVPN 2.0 introduces
-a new mode ("server") which implements a multi\-client
-server capability.
-.\"*********************************************************
-.TP
-.B \-\-local host
-Local host name or IP address for bind.
-If specified, OpenVPN will bind to this address only.
-If unspecified, OpenVPN will bind to all interfaces.
-.\"*********************************************************
-.TP
-.B \-\-remote host [port] [proto]
-Remote host name or IP address.  On the client, multiple
-.B \-\-remote
-options may be specified for redundancy, each referring
-to a different OpenVPN server.  Specifying multiple
-.B \-\-remote
-options for this purpose is a special case of the more
-general connection\-profile feature.  See the
-.B <connection>
-documentation below.
-
-The OpenVPN client will try to connect to a server at
-.B host:port
-in the order specified by the list of
-.B \-\-remote
-options.
-
-.B proto
-indicates the protocol to use when connecting with the
-remote, and may be "tcp" or "udp".
-
-For forcing IPv4 or IPv6 connection suffix tcp or udp
-with 4/6 like udp4/udp6/tcp4/tcp6.
-
-The client will move on to the next host in the list,
-in the event of connection failure.
-Note that at any given time, the OpenVPN client
-will at most be connected to
-one server.
-
-Note that since UDP is connectionless, connection failure
-is defined by the
-.B \-\-ping
-and
-.B \-\-ping\-restart
-options.
-
-Note the following corner case:  If you use multiple
-.B \-\-remote
-options, AND you are dropping root privileges on
-the client with
-.B \-\-user
-and/or
-.B \-\-group,
-AND the client is running a non\-Windows OS, if the client needs
-to switch to a different server, and that server pushes
-back different TUN/TAP or route settings, the client may lack
-the necessary privileges to close and reopen the TUN/TAP interface.
-This could cause the client to exit with a fatal error.
-
-If
-.B \-\-remote
-is unspecified, OpenVPN will listen
-for packets from any IP address, but will not act on those packets unless
-they pass all authentication tests.  This requirement for authentication
-is binding on all potential peers, even those from known and supposedly
-trusted IP addresses (it is very easy to forge a source IP address on
-a UDP packet).
-
-When used in TCP mode, 
-.B \-\-remote
-will act as a filter, rejecting connections from any host which does
-not match
-.B host.
-
-If
-.B host
-is a DNS name which resolves to multiple IP addresses,
-OpenVPN will try them in the order that the system getaddrinfo()
-presents them, so priorization and DNS randomization is done
-by the system library.  Unless an IP version is forced by the
-protocol specification (4/6 suffix), OpenVPN will try both IPv4
-and IPv6 addresses, in the order getaddrinfo() returns them.
-.\"*********************************************************
-.TP
-.B \-\-remote\-random\-hostname
-Prepend a random string (6 bytes, 12 hex characters) to hostname to prevent
-DNS caching.  For example, "foo.bar.gov" would be modified to
-"<random\-chars>.foo.bar.gov".
-.\"*********************************************************
-.TP
-.B <connection>
-Define a client connection
-profile.  Client connection profiles are groups of OpenVPN options that
-describe how to connect to a given OpenVPN server.  Client connection
-profiles are specified within an OpenVPN configuration file, and
-each profile is bracketed by
-.B <connection>
-and
-.B </connection>.
-
-An OpenVPN client will try each connection profile sequentially
-until it achieves a successful connection.  
-
-.B \-\-remote\-random
-can be used to initially "scramble" the connection
-list.
-
-Here is an example of connection profile usage:
-
-.nf
-.ft 3
-.in +4
-client
-dev tun
-
-<connection>
-remote 198.19.34.56 1194 udp
-</connection>
-
-<connection>
-remote 198.19.34.56 443 tcp
-</connection>
-
-<connection>
-remote 198.19.34.56 443 tcp
-http\-proxy 192.168.0.8 8080
-</connection>
-
-<connection>
-remote 198.19.36.99 443 tcp
-http\-proxy 192.168.0.8 8080
-</connection>
-
-persist\-key
-persist\-tun
-pkcs12 client.p12
-remote\-cert\-tls server
-verb 3
-.in -4
-.ft
-.fi
-
-First we try to connect to a server at 198.19.34.56:1194 using UDP.
-If that fails, we then try to connect to 198.19.34.56:443 using TCP.
-If that also fails, then try connecting through an HTTP proxy at 
-192.168.0.8:8080 to 198.19.34.56:443 using TCP.  Finally, try to
-connect through the same proxy to a server at 198.19.36.99:443
-using TCP.
-
-The following OpenVPN options may be used inside of
-a
-.B <connection>
-block:
-
-.B bind,
-.B connect\-retry,
-.B connect\-retry\-max,
-.B connect\-timeout,
-.B explicit\-exit\-notify,
-.B float,
-.B fragment,
-.B http\-proxy,
-.B http\-proxy\-option,
-.B key\-direction,
-.B link\-mtu,
-.B local,
-.B lport,
-.B mssfix,
-.B mtu\-disc,
-.B nobind,
-.B port,
-.B proto,
-.B remote,
-.B rport,
-.B socks\-proxy,
-.B tls\-auth,
-.B tls\-crypt,
-.B tun\-mtu and
-.B tun\-mtu\-extra.
-
-A defaulting mechanism exists for specifying options to apply to
-all
-.B <connection>
-profiles.  If any of the above options (with the exception of
-.B remote
-) appear outside of a
-.B <connection>
-block, but in a configuration file which has one or more
-.B <connection>
-blocks, the option setting will be used as a default for
-.B <connection>
-blocks which follow it in the configuration file.
-
-For example, suppose the
-.B nobind
-option were placed in the sample configuration file above, near
-the top of the file, before the first
-.B <connection>
-block.  The effect would be as if
-.B nobind
-were declared in all
-.B <connection>
-blocks below it.
-.\"*********************************************************
-.TP
-.B \-\-proto\-force p
-When iterating through connection profiles,
-only consider profiles using protocol
-.B p
-('tcp'|'udp'). 
-.\"*********************************************************
-.TP
-.B \-\-remote\-random
-When multiple
-.B \-\-remote
-address/ports are specified, or if connection profiles are being
-used, initially randomize the order of the list
-as a kind of basic load\-balancing measure.
-.\"*********************************************************
-.TP
-.B \-\-proto p
-Use protocol
-.B p
-for communicating with remote host.
-.B p
-can be
-.B udp,
-.B tcp\-client,
-or
-.B tcp\-server.
-
-The default protocol is
-.B udp
-when
-.B \-\-proto
-is not specified.
-
-For UDP operation,
-.B \-\-proto udp
-should be specified on both peers.
-
-For TCP operation, one peer must use
-.B \-\-proto tcp\-server
-and the other must use
-.B \-\-proto tcp\-client.
-A peer started with
-.B tcp\-server
-will wait indefinitely for an incoming connection.  A peer
-started with
-.B tcp\-client
-will attempt to connect, and if that fails, will sleep for 5
-seconds (adjustable via the
-.B \-\-connect\-retry
-option) and try again infinite or up to N retries (adjustable via the
-.B \-\-connect\-retry\-max
-option).  Both TCP client and server will simulate
-a SIGUSR1 restart signal if either side resets the connection.
-
-OpenVPN is designed to operate optimally over UDP, but TCP capability is provided
-for situations where UDP cannot be used.
-In comparison with UDP, TCP will usually be
-somewhat less efficient and less robust when used over unreliable or congested
-networks.
-
-This article outlines some of problems with tunneling IP over TCP:
-
-.I http://sites.inka.de/sites/bigred/devel/tcp\-tcp.html
-
-There are certain cases, however, where using TCP may be advantageous from
-a security and robustness perspective, such as tunneling non\-IP or
-application\-level UDP protocols, or tunneling protocols which don't
-possess a built\-in reliability layer.
-.\"*********************************************************
-.TP
-.B \-\-connect\-retry n [max]
-Wait
-.B n
-seconds  between connection attempts (default=5). Repeated reconnection
-attempts are slowed down after 5 retries per remote by doubling the wait
-time after each unsuccessful attempt. The optional argument
-.B max
-specifies the maximum value of wait time in seconds at which it gets
-capped (default=300).
-.\"*********************************************************
-.TP
-.B \-\-connect\-retry\-max n
-.B n
-specifies the number of times each
-.B \-\-remote
-or
-.B <connection>
-entry is tried. Specifying
-.B n
-as one would try each entry exactly once. A successful connection
-resets the counter. (default=unlimited).
-.\"*********************************************************
-.TP
-.B \-\-show\-proxy\-settings
-Show sensed HTTP or SOCKS proxy settings. Currently, only Windows clients
-support this option.
-.\"*********************************************************
-.TP
-.B \-\-http\-proxy server port [authfile|'auto'|'auto\-nct'] [auth\-method]
-Connect to remote host through an HTTP proxy at address
-.B server
-and port
-.B port.
-If HTTP Proxy\-Authenticate is required,
-.B authfile
-is a file containing a username and password on 2 lines, or
-"stdin" to prompt from console. Its content can also be specified
-in the config file with the
-.B \-\-http\-proxy\-user\-pass
-option. (See section on inline files)
-
-.B auth\-method
-should be one of "none", "basic", or "ntlm".
-
-HTTP Digest authentication is supported as well, but only via
-the
-.B auto
-or
-.B auto\-nct
-flags (below).
-
-The
-.B auto
-flag causes OpenVPN to automatically determine the
-.B auth\-method
-and query stdin or the management interface for
-username/password credentials, if required.  This flag
-exists on OpenVPN 2.1 or higher.
-
-The
-.B auto\-nct
-flag (no clear\-text auth) instructs OpenVPN to automatically
-determine the authentication method, but to reject weak
-authentication protocols such as HTTP Basic Authentication.
-.\"*********************************************************
-.TP
-.B \-\-http\-proxy\-option type [parm]
-Set extended HTTP proxy options.
-Repeat to set multiple options.
-
-.B VERSION version \-\-
-Set HTTP version number to
-.B version
-(default=1.0).
-
-.B AGENT user\-agent \-\-
-Set HTTP "User\-Agent" string to
-.B user\-agent.
-
-.B CUSTOM\-HEADER name content \-\-
-Adds the custom Header with
-.B name
-as name and
-.B content
-as the content of the custom HTTP header.
-.\"*********************************************************
-.TP
-.B \-\-socks\-proxy server [port] [authfile]
-Connect to remote host through a Socks5 proxy at address
-.B server
-and port
-.B port
-(default=1080).
-.B authfile
-(optional) is a file containing a username and password on 2 lines, or
-"stdin" to prompt from console.
-.\"*********************************************************
-.TP
-.B \-\-resolv\-retry n
-If hostname resolve fails for
-.B \-\-remote,
-retry resolve for
-.B n
-seconds before failing.
-
-Set
-.B n
-to "infinite" to retry indefinitely.
-
-By default,
-.B \-\-resolv\-retry infinite
-is enabled.  You can disable by setting n=0.
-.\"*********************************************************
-.TP
-.B \-\-float
-Allow remote peer to change its IP address and/or port number, such as due to
-DHCP (this is the default if
-.B \-\-remote
-is not used).
-.B \-\-float
-when specified with
-.B \-\-remote
-allows an OpenVPN session to initially connect to a peer
-at a known address, however if packets arrive from a new
-address and pass all authentication tests, the new address
-will take control of the session.  This is useful when
-you are connecting to a peer which holds a dynamic address
-such as a dial\-in user or DHCP client.
-
-Essentially,
-.B \-\-float
-tells OpenVPN to accept authenticated packets
-from any address, not only the address which was specified in the
-.B \-\-remote
-option.
-.\"*********************************************************
-.TP
-.B \-\-ipchange cmd
-Run command
-.B cmd
-when our remote ip\-address is initially authenticated or
-changes.
-
-.B cmd
-consists of a path to script (or executable program), optionally
-followed by arguments. The path and arguments may be single\- or double\-quoted
-and/or escaped using a backslash, and should be separated by one or more spaces.
-
-When
-.B cmd
-is executed two arguments are appended after any arguments specified in
-.B cmd
-, as follows:
-
-.B cmd ip_address port_number
-
-Don't use
-.B \-\-ipchange
-in
-.B \-\-mode server
-mode.  Use a
-.B \-\-client\-connect
-script instead.
-
-See the "Environmental Variables" section below for
-additional parameters passed as environmental variables.
-
-If you are running in a dynamic IP address environment where
-the IP addresses of either peer could change without notice,
-you can use this script, for example, to edit the
-.I /etc/hosts
-file with the current address of the peer.  The script will
-be run every time the remote peer changes its IP address.
-
-Similarly if
-.I our
-IP address changes due to DHCP, we should configure
-our IP address change script (see man page for
-.BR dhcpcd (8)
-) to deliver a
-.B SIGHUP
-or
-.B SIGUSR1
-signal to OpenVPN.  OpenVPN will then
-reestablish a connection with its most recently authenticated
-peer on its new IP address.
-.\"*********************************************************
-.TP
-.B \-\-port port
-TCP/UDP port number or port name for both local and remote (sets both
-.B \-\-lport
-and
-.B \-\-rport
-options to given port).  The current
-default of 1194 represents the official IANA port number
-assignment for OpenVPN and has been used since version 2.0\-beta17.
-Previous versions used port 5000 as the default.
-.\"*********************************************************
-.TP
-.B \-\-lport port
-Set local TCP/UDP port number or name.  Cannot be used together with
-.B \-\-nobind
-option.
-.\"*********************************************************
-.TP
-.B \-\-rport port
-Set TCP/UDP port number or name used by the
-.B \-\-remote
-option. The port can also be set directly using the
-.B \-\-remote
-option.
-.\"*********************************************************
-.TP
-.B \-\-bind [ipv6only]
-Bind to local address and port. This is the default unless any of 
-.B \-\-proto tcp\-client
-,
-.B \-\-http\-proxy
-or
-.B \-\-socks\-proxy
-are used.
-
-If the
-.B ipv6only
-keyword is present OpenVPN will bind only to IPv6 (as opposed
-to IPv6 and IPv4) when a IPv6 socket is opened.
-
-.\"*********************************************************
-.TP
-.B \-\-nobind
-Do not bind to local address and port.  The IP stack will allocate
-a dynamic port for returning packets.  Since the value of the dynamic port
-could not be known in advance by a peer, this option is only suitable for
-peers which will be initiating connections by using the
-.B \-\-remote
-option.
-.\"*********************************************************
-.TP
-.B \-\-dev tunX | tapX | null
-TUN/TAP virtual network device (
-.B X
-can be omitted for a dynamic device.)
-
-See examples section below
-for an example on setting up a TUN device.
-
-You must use either tun devices on both ends of the connection
-or tap devices on both ends.  You cannot mix them, as they
-represent different underlying network layers.
-
-.B tun
-devices encapsulate IPv4 or IPv6 (OSI Layer 3) while
-.B tap
-devices encapsulate Ethernet 802.3 (OSI Layer 2).
-.\"*********************************************************
-.TP
-.B \-\-dev\-type device\-type
-Which device type are we using?
-.B device\-type
-should be
-.B tun
-(OSI Layer 3)
-or
-.B tap
-(OSI Layer 2).
-Use this option only if the TUN/TAP device used with
-.B \-\-dev
-does not begin with
-.B tun
-or
-.B tap.
-.\"*********************************************************
-.TP
-.B \-\-topology mode
-Configure virtual addressing topology when running in
-.B \-\-dev tun
-mode.  This directive has no meaning in
-.B \-\-dev tap
-mode, which always uses a
-.B subnet
-topology.
-
-If you set this directive on the server, the
-.B \-\-server
-and
-.B \-\-server\-bridge
-directives will automatically push your chosen topology setting to clients
-as well.  This directive can also be manually pushed to clients.  Like the
-.B \-\-dev
-directive, this directive must always be compatible between client and server.
-
-.B mode
-can be one of:
-
-.B net30 \-\-
-Use a point\-to\-point topology, by allocating one /30 subnet per client.
-This is designed to allow point\-to\-point semantics when some
-or all of the connecting clients might be Windows systems.  This is the
-default on OpenVPN 2.0.
-
-.B p2p \-\-
-Use a point\-to\-point topology where the remote endpoint of the client's
-tun interface always points to the local endpoint of the server's tun interface.
-This mode allocates a single IP address per connecting client.
-Only use
-when none of the connecting clients are Windows systems.  This mode
-is functionally equivalent to the
-.B \-\-ifconfig\-pool\-linear
-directive which is available in OpenVPN 2.0, is deprecated and will be
-removed in OpenVPN 2.5
-
-.B subnet \-\-
-Use a subnet rather than a point\-to\-point topology by
-configuring the tun interface with a local IP address and subnet mask,
-similar to the topology used in
-.B \-\-dev tap
-and ethernet bridging mode.
-This mode allocates a single IP address per connecting client and works on
-Windows as well.  Only available when server and clients are OpenVPN 2.1 or
-higher, or OpenVPN 2.0.x which has been manually patched with the
-.B \-\-topology
-directive code.  When used on Windows, requires version 8.2 or higher
-of the TAP\-Win32 driver.  When used on *nix, requires that the tun
-driver supports an
-.BR ifconfig (8)
-command which sets a subnet instead of a remote endpoint IP address.
-
-This option exists in OpenVPN 2.1 or higher.
-
-Note: Using
-.B \-\-topology subnet
-changes the interpretation of the arguments of
-.B \-\-ifconfig
-to mean "address netmask", no longer "local remote".
-.\"*********************************************************
-.TP
-.B \-\-dev\-node node
-Explicitly set the device node rather than using
-/dev/net/tun, /dev/tun, /dev/tap, etc.  If OpenVPN
-cannot figure out whether
-.B node
-is a TUN or TAP device based on the name, you should
-also specify
-.B \-\-dev\-type tun
-or
-.B \-\-dev\-type tap.
-
-Under Mac OS X this option can be used to specify the default tun
-implementation. Using
-.B \-\-dev\-node utun
-forces usage of the native Darwin tun kernel support. Use
-.B \-\-dev\-node utunN
-to select a specific utun instance. To force using the tun.kext (/dev/tunX) use
-.B \-\-dev\-node tun\fR.
-When not specifying a
-.B \-\-dev\-node
-option openvpn will first try to open utun, and fall back to tun.kext.
-
-On Windows systems, select the TAP\-Win32 adapter which
-is named
-.B node
-in the Network Connections Control Panel or the
-raw GUID of the adapter enclosed by braces.
-The
-.B \-\-show\-adapters
-option under Windows can also be used
-to enumerate all available TAP\-Win32
-adapters and will show both the network
-connections control panel name and the GUID for
-each TAP\-Win32 adapter.
-.TP
-.B \-\-lladdr address
-Specify the link layer address, more commonly known as the MAC address.
-Only applied to TAP devices.
-.\"*********************************************************
-.TP
-.B \-\-iproute cmd
-Set alternate command to execute instead of default iproute2 command.
-May be used in order to execute OpenVPN in unprivileged environment.
-.\"*********************************************************
-.TP
-.B \-\-ifconfig l rn
-Set TUN/TAP adapter parameters. 
-.B l
-is the IP address of the local VPN endpoint.
-For TUN devices in point\-to\-point mode,
-.B rn
-is the IP address of the remote VPN endpoint.
-For TAP devices, or TUN devices used with
-.B \-\-topology subnet,
-.B rn
-is the subnet mask of the virtual network segment
-which is being created or connected to.
-
-For TUN devices, which facilitate virtual
-point\-to\-point IP connections (when used in
-.B \-\-topology net30
-or
-.B p2p
-mode),
-the proper usage of
-.B \-\-ifconfig
-is to use two private IP addresses
-which are not a member of any
-existing subnet which is in use.
-The IP addresses may be consecutive
-and should have their order reversed
-on the remote peer.  After the VPN
-is established, by pinging
-.B rn,
-you will be pinging across the VPN.
-
-For TAP devices, which provide
-the ability to create virtual
-ethernet segments, or TUN devices in
-.B \-\-topology subnet
-mode (which create virtual "multipoint networks"),
-.B \-\-ifconfig
-is used to set an IP address and
-subnet mask just as a physical
-ethernet adapter would be
-similarly configured.  If you are
-attempting to connect to a remote
-ethernet bridge, the IP address
-and subnet should be set to values
-which would be valid on the
-the bridged ethernet segment (note
-also that DHCP can be used for the
-same purpose).
-
-This option, while primarily a proxy for the
-.BR ifconfig (8)
-command, is designed to simplify TUN/TAP
-tunnel configuration by providing a
-standard interface to the different
-ifconfig implementations on different
-platforms.
-
-.B \-\-ifconfig
-parameters which are IP addresses can
-also be specified as a DNS or /etc/hosts
-file resolvable name.
-
-For TAP devices,
-.B \-\-ifconfig
-should not be used if the TAP interface will be
-getting an IP address lease from a DHCP
-server.
-.\"*********************************************************
-.TP
-.B \-\-ifconfig\-noexec
-Don't actually execute ifconfig/netsh commands, instead
-pass
-.B \-\-ifconfig
-parameters to scripts using environmental variables.
-.\"*********************************************************
-.TP
-.B \-\-ifconfig\-nowarn
-Don't output an options consistency check warning
-if the
-.B \-\-ifconfig
-option on this side of the
-connection doesn't match the remote side.  This is useful
-when you want to retain the overall benefits of the
-options consistency check (also see
-.B \-\-disable\-occ
-option) while only disabling the ifconfig component of
-the check.
-
-For example,
-if you have a configuration where the local host uses
-.B \-\-ifconfig
-but the remote host does not, use
-.B \-\-ifconfig\-nowarn
-on the local host.
-
-This option will also silence warnings about potential
-address conflicts which occasionally annoy more experienced
-users by triggering "false positive" warnings.
-.\"*********************************************************
-.TP
-.B \-\-route network/IP [netmask] [gateway] [metric]
-Add route to routing table after connection is established.
-Multiple routes can be specified.  Routes will be
-automatically torn down in reverse order prior to
-TUN/TAP device close.
-
-This option is intended as
-a convenience proxy for the
-.BR route (8)
-shell command,
-while at the same time providing portable semantics
-across OpenVPN's platform space.
-
-.B netmask
-default \-\- 255.255.255.255
-
-.B gateway
-default \-\- taken from
-.B \-\-route\-gateway
-or the second parameter to
-.B \-\-ifconfig
-when
-.B \-\-dev tun
-is specified.
-
-.B metric
-default \-\- taken from
-.B \-\-route\-metric
-otherwise 0.
-
-The default can be specified by leaving an option blank or setting
-it to "default".
-
-The
-.B network
-and
-.B gateway
-parameters can
-also be specified as a DNS or /etc/hosts
-file resolvable name, or as one of three special keywords:
-
-.B vpn_gateway
-\-\- The remote VPN endpoint address
-(derived either from
-.B \-\-route\-gateway
-or the second parameter to
-.B \-\-ifconfig
-when
-.B \-\-dev tun
-is specified).
-
-.B net_gateway
-\-\- The pre\-existing IP default gateway, read from the routing
-table (not supported on all OSes).
-
-.B remote_host
-\-\- The
-.B \-\-remote
-address if OpenVPN is being run in client mode, and is undefined in server mode.
-.\"*********************************************************
-.TP
-.B \-\-route\-gateway gw|'dhcp'
-Specify a default gateway
-.B gw
-for use with
-.B \-\-route.
-
-If
-.B dhcp
-is specified as the parameter,
-the gateway address will be extracted from a DHCP
-negotiation with the OpenVPN server\-side LAN.
-.\"*********************************************************
-.TP
-.B \-\-route\-metric m
-Specify a default metric
-.B m
-for use with
-.B \-\-route.
-.\"*********************************************************
-.TP
-.B \-\-route\-delay [n] [w]
-Delay
-.B n
-seconds (default=0) after connection
-establishment, before adding routes. If
-.B n
-is 0, routes will be added immediately upon connection
-establishment.  If
-.B \-\-route\-delay
-is omitted, routes will be added immediately after TUN/TAP device
-open and
-.B \-\-up
-script execution, before any
-.B \-\-user
-or 
-.B \-\-group
-privilege downgrade (or
-.B \-\-chroot
-execution.)
-
-This option is designed to be useful in scenarios where DHCP is
-used to set
-tap adapter addresses.  The delay will give the DHCP handshake
-time to complete before routes are added.
-
-On Windows,
-.B \-\-route\-delay
-tries to be more intelligent by waiting
-.B w
-seconds (w=30 by default)
-for the TAP\-Win32 adapter to come up before adding routes.
-.\"*********************************************************
-.TP
-.B \-\-route\-up cmd
-Run command
-.B cmd
-after routes are added, subject to
-.B \-\-route\-delay.
-
-.B cmd
-consists of a path to script (or executable program), optionally
-followed by arguments. The path and arguments may be single\- or double\-quoted
-and/or escaped using a backslash, and should be separated by one or more spaces.
-
-See the "Environmental Variables" section below for
-additional parameters passed as environmental variables.
-.\"*********************************************************
-.TP
-.B \-\-route\-pre\-down cmd
-Run command
-.B cmd
-before routes are removed upon disconnection.
-
-.B cmd
-consists of a path to script (or executable program), optionally
-followed by arguments. The path and arguments may be single\- or double\-quoted
-and/or escaped using a backslash, and should be separated by one or more spaces.
-
-See the "Environmental Variables" section below for
-additional parameters passed as environmental variables.
-.\"*********************************************************
-.TP
-.B \-\-route\-noexec
-Don't add or remove routes automatically.  Instead pass routes to
-.B \-\-route\-up
-script using environmental variables.
-.\"*********************************************************
-.TP
-.B \-\-route\-nopull
-When used with
-.B \-\-client
-or
-.B \-\-pull,
-accept options pushed by server EXCEPT for routes, block\-outside\-dns and dhcp
-options like DNS servers.
-
-When used on the client, this option effectively bars the
-server from adding routes to the client's routing table,
-however note that this option still allows the server
-to set the TCP/IP properties of the client's TUN/TAP interface.
-.\"*********************************************************
-.TP
-.B \-\-allow\-pull\-fqdn
-Allow client to pull DNS names from server (rather than being limited
-to IP address) for
-.B \-\-ifconfig,
-.B \-\-route,
-and
-.B \-\-route\-gateway.
-.\"*********************************************************
-.TP
-.B \-\-client\-nat snat|dnat network netmask alias
-This pushable client option sets up a stateless one\-to\-one NAT
-rule on packet addresses (not ports), and is useful in cases
-where routes or ifconfig settings pushed to the client would
-create an IP numbering conflict.
-
-.B network/netmask
-(for example 192.168.0.0/255.255.0.0)
-defines the local view of a resource from the client perspective, while
-.B alias/netmask
-(for example 10.64.0.0/255.255.0.0)
-defines the remote view from the server perspective.
-
-Use
-.B snat
-(source NAT) for resources owned by the client and
-.B dnat
-(destination NAT) for remote resources.
-
-Set
-.B \-\-verb 6
-for debugging info showing the transformation of src/dest
-addresses in packets.
-.\"*********************************************************
-.TP
-.B \-\-redirect\-gateway flags...
-Automatically execute routing commands to cause all outgoing IP traffic
-to be redirected over the VPN.  This is a client\-side option.
-
-This option performs three steps:
-
-.B (1)
-Create a static route for the
-.B \-\-remote
-address which forwards to the pre\-existing default gateway.
-This is done so that
-.B (3)
-will not create a routing loop.
-
-.B (2)
-Delete the default gateway route.
-
-.B (3)
-Set the new default gateway to be the VPN endpoint address (derived either from
-.B \-\-route\-gateway
-or the second parameter to
-.B \-\-ifconfig
-when
-.B \-\-dev tun
-is specified).
-
-When the tunnel is torn down, all of the above steps are reversed so
-that the original default route is restored.
-
-Option flags:
-
-.B local \-\-
-Add the
-.B local
-flag if both OpenVPN peers are directly connected via a common subnet,
-such as with wireless.  The
-.B local
-flag will cause step
-.B 1
-above to be omitted.
-
-.B autolocal \-\-
-Try to automatically determine whether to enable
-.B local
-flag above.
-
-.B def1 \-\-
-Use this flag to override
-the default gateway by using 0.0.0.0/1 and 128.0.0.0/1
-rather than 0.0.0.0/0.  This has the benefit of overriding
-but not wiping out the original default gateway. 
-
-.B bypass\-dhcp \-\-
-Add a direct route to the DHCP server (if it is non\-local) which
-bypasses the tunnel
-(Available on Windows clients, may not be available
-on non\-Windows clients).
-
-.B bypass\-dns \-\-
-Add a direct route to the DNS server(s) (if they are non\-local) which
-bypasses the tunnel
-(Available on Windows clients, may not be available
-on non\-Windows clients).
-
-.B block\-local \-\-
-Block access to local LAN when the tunnel is active, except for
-the LAN gateway itself.  This is accomplished by routing the local
-LAN (except for the LAN gateway address) into the tunnel.
-
-.B ipv6 \-\-
-Redirect IPv6 routing into the tunnel.  This works similar to the
-.B def1
-flag, that is, more specific IPv6 routes are added (2000::/4, 3000::/4),
-covering the whole IPv6 unicast space.
-
-.B !ipv4 \-\-
-Do not redirect IPv4 traffic \- typically used in the flag pair
-.B "ipv6 !ipv4"
-to redirect IPv6\-only.
-.\"*********************************************************
-.TP
-.B \-\-link\-mtu n
-Sets an upper bound on the size of UDP packets which are sent
-between OpenVPN peers.  It's best not to set this parameter unless
-you know what you're doing.
-.\"*********************************************************
-.\"*********************************************************
-.TP
-.B \-\-redirect\-private [flags]
-Like \-\-redirect\-gateway, but omit actually changing the default
-gateway.  Useful when pushing private subnets.
-.\"*********************************************************
-.TP
-.B \-\-block\-ipv6
-On the client, instead of sending IPv6 packets over the VPN tunnel, all
-IPv6 packets are answered with an ICMPv6 no route host message. On the
-server, all IPv6 packets from clients are answered with an ICMPv6
-no route to host message. This options is intended for cases when IPv6
-should be blocked and other options are not available.
-\.B \-\-block\-ipv6
-will use the remote IPv6 as source address of the ICMPv6 packets if set,
-otherwise will use fe80::7 as source address.
-
-For this option to make sense you actually have to route traffic to the tun
-interface. The following example config block would send all IPv6 traffic to
-OpenVPN and answer all requests with no route to host, effectively blocking
-IPv6.
-
-# client config
-.br
-.B \-\-ifconfig-ipv6
-fd15:53b6:dead::2/64  fd15:53b6:dead::1
-.br
-.B \-\-redirect\-gateway
-ipv6
-.br
-.B \-\-block\-ipv6
-
-# Server config, push a "valid" ipv6 config to the client and block
-# on the server
-.br
-.B \-\-push
-"ifconfig-ipv6 fd15:53b6:dead::2/64  fd15:53b6:dead::1"
-.br
-.B \-\-push
-"redirect\-gateway ipv6"
-.br
-.B \-\-block\-ipv6
-.\"*********************************************************
-.TP
-.B \-\-tun\-mtu n
-Take the TUN device MTU to be
-.B n
-and derive the link MTU
-from it (default=1500).  In most cases, you will probably want to
-leave this parameter set to its default value.
-
-The MTU (Maximum Transmission Units) is
-the maximum datagram size in bytes that can be sent unfragmented
-over a particular network path.  OpenVPN requires that packets
-on the control or data channels be sent unfragmented.
-
-MTU problems often manifest themselves as connections which
-hang during periods of active usage.
-
-It's best to use the
-.B \-\-fragment
-and/or
-.B \-\-mssfix
-options to deal with MTU sizing issues.
-.\"*********************************************************
-.TP
-.B \-\-tun\-mtu\-extra n
-Assume that the TUN/TAP device might return as many as
-.B n
-bytes more than the
-.B \-\-tun\-mtu
-size on read.  This parameter defaults to 0, which is sufficient for
-most TUN devices.  TAP devices may introduce additional overhead in excess
-of the MTU size, and a setting of 32 is the default when TAP devices are used.
-This parameter only controls internal OpenVPN buffer sizing,
-so there is no transmission overhead associated with using a larger value.
-.\"*********************************************************
-.TP
-.B \-\-mtu\-disc type
-Should we do Path MTU discovery on TCP/UDP channel?  Only supported on OSes such
-as Linux that supports the necessary system call to set.
-
-.B 'no'
-\-\- Never send DF (Don't Fragment) frames
-.br
-.B 'maybe'
-\-\- Use per\-route hints
-.br
-.B 'yes'
-\-\- Always DF (Don't Fragment)
-.br
-.\"*********************************************************
-.TP
-.B \-\-mtu\-test
-To empirically measure MTU on connection startup,
-add the
-.B \-\-mtu\-test
-option to your configuration.
-OpenVPN will send ping packets of various sizes
-to the remote peer and measure the largest packets
-which were successfully received.  The
-.B \-\-mtu\-test
-process normally takes about 3 minutes to complete.
-.\"*********************************************************
-.TP
-.B \-\-fragment max
-Enable internal datagram fragmentation so
-that no UDP datagrams are sent which
-are larger than
-.B max
-bytes.
-
-The
-.B max
-parameter is interpreted in the same way as the
-.B \-\-link\-mtu
-parameter, i.e. the UDP packet size after encapsulation
-overhead has been added in, but not including
-the UDP header itself.
-
-The
-.B \-\-fragment
-option only makes sense when you are using the UDP protocol (
-.B \-\-proto udp
-).
-
-.B \-\-fragment
-adds 4 bytes of overhead per datagram.
-
-See the
-.B \-\-mssfix
-option below for an important related option to
-.B \-\-fragment.
-
-It should also be noted that this option is not meant to replace
-UDP fragmentation at the IP stack level.  It is only meant as a
-last resort when path MTU discovery is broken.  Using this option
-is less efficient than fixing path MTU discovery for your IP link and
-using native IP fragmentation instead.
-
-Having said that, there are circumstances where using OpenVPN's
-internal fragmentation capability may be your only option, such
-as tunneling a UDP multicast stream which requires fragmentation.
-.\"*********************************************************
-.TP
-.B \-\-mssfix max
-Announce to TCP sessions running over the tunnel that they should limit
-their send packet sizes such that after OpenVPN has encapsulated them,
-the resulting UDP packet size that OpenVPN sends to its peer will not
-exceed
-.B max
-bytes. The default value is
-.B 1450.
-
-The
-.B max
-parameter is interpreted in the same way as the
-.B \-\-link\-mtu
-parameter, i.e. the UDP packet size after encapsulation
-overhead has been added in, but not including
-the UDP header itself. Resulting packet would be at most 28
-bytes larger for IPv4 and 48 bytes for IPv6 (20/40 bytes for IP
-header and 8 bytes for UDP header). Default value of 1450 allows
-IPv4 packets to be transmitted over a link with MTU 1473 or higher
-without IP level fragmentation.
-
-The
-.B \-\-mssfix
-option only makes sense when you are using the UDP protocol
-for OpenVPN peer\-to\-peer communication, i.e.
-.B \-\-proto udp.
-
-.B \-\-mssfix
-and
-.B \-\-fragment
-can be ideally used together, where
-.B \-\-mssfix
-will try to keep TCP from needing
-packet fragmentation in the first place,
-and if big packets come through anyhow
-(from protocols other than TCP),
-.B \-\-fragment
-will internally fragment them.
-
-Both
-.B \-\-fragment
-and
-.B \-\-mssfix
-are designed to work around cases where Path MTU discovery
-is broken on the network path between OpenVPN peers.
-
-The usual symptom of such a breakdown is an OpenVPN
-connection which successfully starts, but then stalls
-during active usage.
-
-If
-.B \-\-fragment
-and
-.B \-\-mssfix
-are used together,
-.B \-\-mssfix
-will take its default
-.B max
-parameter from the
-.B \-\-fragment max
-option.
-
-Therefore, one could lower the maximum UDP packet size
-to 1300 (a good first try for solving MTU\-related
-connection problems) with the following options:
-
-.B \-\-tun\-mtu 1500 \-\-fragment 1300 \-\-mssfix
-.\"*********************************************************
-.TP
-.B \-\-sndbuf size
-Set the TCP/UDP socket send buffer size.
-Defaults to operation system default.
-.\"*********************************************************
-.TP
-.B \-\-rcvbuf size
-Set the TCP/UDP socket receive buffer size.
-Defaults to operation system default.
-.\"*********************************************************
-.TP
-.B \-\-mark value
-Mark encrypted packets being sent with value. The mark value can be
-matched in policy routing and packetfilter rules. This option is
-only supported in Linux and does nothing on other operating systems.
-.\"*********************************************************
-.TP
-.B \-\-socket\-flags flags...
-Apply the given flags to the OpenVPN transport socket.
-Currently, only
-.B TCP_NODELAY
-is supported.
-
-The
-.B TCP_NODELAY
-socket flag is useful in TCP mode, and causes the kernel
-to send tunnel packets immediately over the TCP connection without
-trying to group several smaller packets into a larger packet.
-This can result in a considerably improvement in latency.
-
-This option is pushable from server to client, and should be used
-on both client and server for maximum effect.
-.\"*********************************************************
-.TP
-.B \-\-txqueuelen n
-(Linux only) Set the TX queue length on the TUN/TAP interface.
-Currently defaults to 100.
-.\"*********************************************************
-.TP
-.B \-\-shaper n
-Limit bandwidth of outgoing tunnel data to
-.B n
-bytes per second on the TCP/UDP port.
-Note that this will only work if mode is set to p2p.
-If you want to limit the bandwidth
-in both directions, use this option on both peers.
-
-OpenVPN uses the following algorithm to implement
-traffic shaping: Given a shaper rate of
-.I n
-bytes per second, after a datagram write of
-.I b
-bytes is queued on the TCP/UDP port, wait a minimum of
-.I (b / n)
-seconds before queuing the next write.
-
-It should be noted that OpenVPN supports multiple
-tunnels between the same two peers, allowing you
-to construct full\-speed and reduced bandwidth tunnels
-at the same time,
-routing low\-priority data such as off\-site backups
-over the reduced bandwidth tunnel, and other data
-over the full\-speed tunnel.
-
-Also note that for low bandwidth tunnels
-(under 1000 bytes per second), you should probably
-use lower MTU values as well (see above), otherwise
-the packet latency will grow so large as to trigger
-timeouts in the TLS layer and TCP connections running
-over the tunnel.
-
-OpenVPN allows
-.B n
-to be between 100 bytes/sec and 100 Mbytes/sec.
-.\"*********************************************************
-.TP
-.B \-\-inactive n [bytes]
-Causes OpenVPN to exit after
-.B n
-seconds of inactivity on the TUN/TAP device. The time length of
-inactivity is measured since the last incoming or outgoing tunnel
-packet.  The default value is 0 seconds, which disables this feature.
-
-If the optional
-.B bytes
-parameter is included,
-exit if less than
-.B bytes
-of combined in/out traffic are produced on the tun/tap device
-in
-.B n
-seconds.
-
-In any case, OpenVPN's internal ping packets (which are just
-keepalives) and TLS control packets are not considered
-"activity", nor are they counted as traffic, as they are used
-internally by OpenVPN and are not an indication of actual user
-activity.
-.\"*********************************************************
-.TP
-.B \-\-ping n
-Ping remote over the TCP/UDP control channel
-if no packets have been sent for at least
-.B n
-seconds (specify
-.B \-\-ping
-on both peers to cause ping packets to be sent in both directions since
-OpenVPN ping packets are not echoed like IP ping packets).
-When used in one of OpenVPN's secure modes (where
-.B \-\-secret, \-\-tls\-server,
-or
-.B \-\-tls\-client
-is specified), the ping packet
-will be cryptographically secure.
-
-This option has two intended uses:
-
-(1) Compatibility
-with stateful firewalls.  The periodic ping will ensure that
-a stateful firewall rule which allows OpenVPN UDP packets to
-pass will not time out.
-
-(2) To provide a basis for the remote to test the existence
-of its peer using the
-.B \-\-ping\-exit
-option.
-.\"*********************************************************
-.TP
-.B \-\-ping\-exit n
-Causes OpenVPN to exit after
-.B n
-seconds pass without reception of a ping
-or other packet from remote.
-This option can be combined with
-.B \-\-inactive, \-\-ping,
-and
-.B \-\-ping\-exit
-to create a two\-tiered inactivity disconnect.
-
-For example,
-
-.B openvpn [options...] \-\-inactive 3600 \-\-ping 10 \-\-ping\-exit 60
-
-when used on both peers will cause OpenVPN to exit within 60
-seconds if its peer disconnects, but will exit after one
-hour if no actual tunnel data is exchanged.
-.\"*********************************************************
-.TP
-.B \-\-ping\-restart n
-Similar to
-.B \-\-ping\-exit,
-but trigger a
-.B SIGUSR1
-restart after
-.B n
-seconds pass without reception of a ping
-or other packet from remote.
-
-This option is useful in cases
-where the remote peer has a dynamic IP address and
-a low\-TTL DNS name is used to track the IP address using
-a service such as
-.I http://dyndns.org/
-+ a dynamic DNS client such
-as
-.B ddclient.
-
-If the peer cannot be reached, a restart will be triggered, causing
-the hostname used with
-.B \-\-remote
-to be re\-resolved (if
-.B \-\-resolv\-retry
-is also specified).
-
-In server mode,
-.B \-\-ping\-restart, \-\-inactive,
-or any other type of internally generated signal will always be
-applied to
-individual client instance objects, never to whole server itself.
-Note also in server mode that any internally generated signal
-which would normally cause a restart, will cause the deletion
-of the client instance object instead.
-
-In client mode, the
-.B \-\-ping\-restart
-parameter is set to 120 seconds by default.  This default will
-hold until the client pulls a replacement value from the server, based on
-the
-.B \-\-keepalive
-setting in the server configuration.
-To disable the 120 second default, set
-.B \-\-ping\-restart 0
-on the client.
-
-See the signals section below for more information
-on
-.B SIGUSR1.
-
-Note that the behavior of
-.B SIGUSR1
-can be modified by the
-.B \-\-persist\-tun, \-\-persist\-key, \-\-persist\-local\-ip,
-and
-.B \-\-persist\-remote\-ip
-options.
-
-Also note that
-.B \-\-ping\-exit
-and
-.B \-\-ping\-restart
-are mutually exclusive and cannot be used together.
-.\"*********************************************************
-.TP
-.B \-\-keepalive interval timeout
-A helper directive designed to simplify the expression of
-.B \-\-ping
-and
-.B \-\-ping\-restart.
-
-This option can be used on both client and server side, but it is
-enough to add this on the server side as it will push appropriate
-.B \-\-ping
-and
-.B \-\-ping\-restart
-options to the client.  If used on both server and client,
-the values pushed from server will override the client local values.
-
-The
-.B timeout
-argument will be twice as long on the server side.  This ensures that
-a timeout is detected on client side before the server side drops
-the connection.
-
-For example,
-.B \-\-keepalive 10 60
-expands as follows:
-
-.nf
-.ft 3
-.in +4
- if mode server:
-   ping 10                    # Argument: interval
-   ping\-restart 120           # Argument: timeout*2
-   push "ping 10"             # Argument: interval
-   push "ping\-restart 60"     # Argument: timeout
- else
-   ping 10                    # Argument: interval
-   ping\-restart 60            # Argument: timeout
-.in -4
-.ft
-.fi
-.\"*********************************************************
-.TP
-.B \-\-ping\-timer\-rem
-Run the
-.B \-\-ping\-exit
-/
-.B \-\-ping\-restart
-timer only if we have a remote address.  Use this option if you are
-starting the daemon in listen mode (i.e. without an explicit
-.B \-\-remote
-peer), and you don't want to start clocking timeouts until a remote
-peer connects.
-.\"*********************************************************
-.TP
-.B \-\-persist\-tun
-Don't close and reopen TUN/TAP device or run up/down scripts
-across
-.B SIGUSR1
-or
-.B \-\-ping\-restart
-restarts.
-
-.B SIGUSR1
-is a restart signal similar to
-.B SIGHUP,
-but which offers finer\-grained control over
-reset options.
-.\"*********************************************************
-.TP
-.B \-\-persist\-key
-Don't re\-read key files across
-.B SIGUSR1
-or
-.B \-\-ping\-restart.
-
-This option can be combined with
-.B \-\-user nobody
-to allow restarts triggered by the
-.B SIGUSR1
-signal.
-Normally if you drop root privileges in OpenVPN,
-the daemon cannot be restarted since it will now be unable to re\-read protected
-key files.
-
-This option solves the problem by persisting keys across
-.B SIGUSR1
-resets, so they don't need to be re\-read.
-.\"*********************************************************
-.TP
-.B \-\-persist\-local\-ip
-Preserve initially resolved local IP address and port number
-across
-.B SIGUSR1
-or
-.B \-\-ping\-restart
-restarts.
-.\"*********************************************************
-.TP
-.B \-\-persist\-remote\-ip
-Preserve most recently authenticated remote IP address and port number
-across
-.B SIGUSR1
-or
-.B \-\-ping\-restart
-restarts.
-.\"*********************************************************
-.TP
-.B \-\-mlock
-Disable paging by calling the POSIX mlockall function.
-Requires that OpenVPN be initially run as root (though
-OpenVPN can subsequently downgrade its UID using the
-.B \-\-user
-option).
-
-Using this option ensures that key material and tunnel
-data are never written to disk due to virtual
-memory paging operations which occur under most
-modern operating systems.  It ensures that even if an
-attacker was able to crack the box running OpenVPN, he
-would not be able to scan the system swap file to
-recover previously used
-ephemeral keys, which are used for a period of time
-governed by the
-.B \-\-reneg
-options (see below), then are discarded.
-
-The downside
-of using
-.B \-\-mlock
-is that it will reduce the amount of physical
-memory available to other applications.
-.\"*********************************************************
-.TP
-.B \-\-up cmd
-Run command
-.B cmd
-after successful TUN/TAP device open
-(pre
-.B \-\-user
-UID change).
-
-.B cmd
-consists of a path to script (or executable program), optionally
-followed by arguments. The path and arguments may be single\- or double\-quoted
-and/or escaped using a backslash, and should be separated by one or more spaces.
-
-The up command is useful for specifying route
-commands which route IP traffic destined for
-private subnets which exist at the other
-end of the VPN connection into the tunnel.
-
-For
-.B \-\-dev tun
-execute as:
-
-.B cmd tun_dev tun_mtu link_mtu ifconfig_local_ip ifconfig_remote_ip [ init | restart ]
-
-For
-.B \-\-dev tap
-execute as:
-
-.B cmd tap_dev tap_mtu link_mtu ifconfig_local_ip ifconfig_netmask [ init | restart ]
-
-See the "Environmental Variables" section below for
-additional parameters passed as environmental variables.
-
-Note that if
-.B cmd
-includes arguments, all OpenVPN\-generated arguments will be appended
-to them to build an argument list with which the executable will be
-called.
-
-Typically,
-.B cmd
-will run a script to add routes to the tunnel.
-
-Normally the up script is called after the TUN/TAP device is opened.
-In this context, the last command line parameter passed to the script
-will be
-.I init.
-If the
-.B \-\-up\-restart
-option is also used, the up script will be called for restarts as
-well.  A restart is considered to be a partial reinitialization
-of OpenVPN where the TUN/TAP instance is preserved (the
-.B \-\-persist\-tun
-option will enable such preservation).  A restart
-can be generated by a SIGUSR1 signal, a
-.B \-\-ping\-restart
-timeout, or a connection reset when the TCP protocol is enabled
-with the
-.B \-\-proto
-option.  If a restart occurs, and
-.B \-\-up\-restart
-has been specified, the up script will be called with
-.I restart
-as the last parameter.
-
-NOTE: on restart, OpenVPN will not pass the full set of environment
-variables to the script.  Namely, everything related to routing and
-gateways will not be passed, as nothing needs to be done anyway \- all
-the routing setup is already in place.  Additionally, the up\-restart
-script will run with the downgraded UID/GID settings (if configured).
-
-The following standalone example shows how the
-.B \-\-up
-script can be called in both an initialization and restart context.
-(NOTE: for security reasons, don't run the following example unless UDP port
-9999 is blocked by your firewall.  Also, the example will run indefinitely,
-so you should abort with control\-c).
-
-.B openvpn \-\-dev tun \-\-port 9999 \-\-verb 4 \-\-ping\-restart 10 \-\-up 'echo up' \-\-down 'echo down' \-\-persist\-tun \-\-up\-restart
-
-Note that OpenVPN also provides the
-.B \-\-ifconfig
-option to automatically ifconfig the TUN device,
-eliminating the need to define an
-.B \-\-up
-script, unless you also want to configure routes
-in the
-.B \-\-up
-script.
-
-If
-.B \-\-ifconfig
-is also specified, OpenVPN will pass the ifconfig local
-and remote endpoints on the command line to the
-.B \-\-up
-script so that they can be used to configure routes such as:
-
-.B route add \-net 10.0.0.0 netmask 255.255.255.0 gw $5
-.\"*********************************************************
-.TP
-.B \-\-up\-delay
-Delay TUN/TAP open and possible
-.B \-\-up
-script execution
-until after TCP/UDP connection establishment with peer.
-
-In
-.B \-\-proto udp
-mode, this option normally requires the use of
-.B \-\-ping
-to allow connection initiation to be sensed in the absence
-of tunnel data, since UDP is a "connectionless" protocol.
-
-On Windows, this option will delay the TAP\-Win32 media state
-transitioning to "connected" until connection establishment,
-i.e. the receipt of the first authenticated packet from the peer.
-.\"*********************************************************
-.TP
-.B \-\-down cmd
-Run command
-.B cmd
-after TUN/TAP device close
-(post
-.B \-\-user
-UID change and/or
-.B \-\-chroot
-).
-.B cmd
-consists of a path to script (or executable program), optionally
-followed by arguments. The path and arguments may be single\- or double\-quoted
-and/or escaped using a backslash, and should be separated by one or more spaces.
-
-Called with the same parameters and environmental
-variables as the
-.B \-\-up
-option above.
-
-Note that if you reduce privileges by using
-.B \-\-user
-and/or
-.B \-\-group,
-your
-.B \-\-down
-script will also run at reduced privilege.
-.\"*********************************************************
-.TP
-.B \-\-down\-pre
-Call
-.B \-\-down
-cmd/script before, rather than after, TUN/TAP close.
-.\"*********************************************************
-.TP
-.B \-\-up\-restart
-Enable the
-.B \-\-up
-and
-.B \-\-down
-scripts to be called for restarts as well as initial program start.
-This option is described more fully above in the
-.B \-\-up
-option documentation.
-.\"*********************************************************
-.TP
-.B \-\-setenv name value
-Set a custom environmental variable
-.B name=value
-to pass to script.
-.\"*********************************************************
-.TP
-.B \-\-setenv FORWARD_COMPATIBLE 1
-Relax config file syntax checking so that unknown directives
-will trigger a warning but not a fatal error,
-on the assumption that a given unknown directive might be valid
-in future OpenVPN versions.
-
-This option should be used with caution, as there are good security
-reasons for having OpenVPN fail if it detects problems in a
-config file.  Having said that, there are valid reasons for wanting
-new software features to gracefully degrade when encountered by
-older software versions.
-
-It is also possible to tag a single directive so as not to trigger
-a fatal error if the directive isn't recognized.  To do this,
-prepend the following before the directive:
-.B setenv opt
-
-Versions prior to OpenVPN 2.3.3 will always ignore options set with the
-.B setenv opt
-directive.
-
-See also
-.B \-\-ignore\-unknown\-option
-.\"*********************************************************
-.TP
-.B \-\-setenv\-safe name value
-Set a custom environmental variable
-.B OPENVPN_name=value
-to pass to script.
-
-This directive is designed to be pushed by the server to clients,
-and the prepending of "OPENVPN_" to the environmental variable
-is a safety precaution to prevent a LD_PRELOAD style attack
-from a malicious or compromised server.
-.\"*********************************************************
-.TP
-.B \-\-ignore\-unknown\-option opt1 opt2 opt3 ... optN
-When one of options
-.B opt1 ... optN
-is encountered in the configuration file the configuration
-file parsing does not fail if this OpenVPN version does not
-support the option. Multiple
-.B \-\-ignore\-unknown\-option
-options can be given to support a larger number of options to ignore.
-
-This option should be used with caution, as there are good security
-reasons for having OpenVPN fail if it detects problems in a
-config file. Having said that, there are valid reasons for wanting
-new software features to gracefully degrade when encountered by
-older software versions.
-
-.B \-\-ignore\-unknown\-option
-is available since OpenVPN 2.3.3.
-.\"*********************************************************
-.TP
-.B \-\-script\-security level
-This directive offers policy\-level control over OpenVPN's usage of external programs
-and scripts.  Lower
-.B level
-values are more restrictive, higher values are more permissive.  Settings for
-.B level:
-
-.B 0 \-\-
-Strictly no calling of external programs.
-.br
-.B 1 \-\-
-(Default) Only call built\-in executables such as ifconfig, ip, route, or netsh.
-.br
-.B 2 \-\-
-Allow calling of built\-in executables and user\-defined scripts.
-.br
-.B 3 \-\-
-Allow passwords to be passed to scripts via environmental variables (potentially unsafe).
-
-OpenVPN releases before v2.3 also supported a
-.B method
-flag which indicated how OpenVPN should call external commands and scripts.  This
-could be either
-.B execve
-or 
-.B system. 
-As of OpenVPN 2.3, this flag is no longer accepted.  In most *nix environments the execve()
-approach has been used without any issues.
-
-Some directives such as \-\-up allow options to be passed to the external
-script. In these cases make sure the script name does not contain any spaces or
-the configuration parser will choke because it can't determine where the script
-name ends and script options start.
-
-To run scripts in Windows in earlier OpenVPN
-versions you needed to either add a full path to the script interpreter which can parse the
-script or use the
-.B system
-flag to run these scripts.  As of OpenVPN 2.3 it is now a strict requirement to have
-full path to the script interpreter when running non\-executables files.
-This is not needed for executable files, such as .exe, .com, .bat or .cmd files.  For
-example, if you have a Visual Basic script, you must use this syntax now:
-
-.nf
-.ft 3
-.in +4
-\-\-up 'C:\\\\Windows\\\\System32\\\\wscript.exe C:\\\\Program\\ Files\\\\OpenVPN\\\\config\\\\my\-up\-script.vbs'
-.in -4
-.ft
-.fi
-
-Please note the single quote marks and the escaping of the backslashes (\\) and
-the space character.
-
-The reason the support for the
-.B system
-flag was removed is due to the security implications with shell expansions
-when executing scripts via the system() call.
-.\"*********************************************************
-.TP
-.B \-\-disable\-occ
-Don't output a warning message if option inconsistencies are detected between
-peers.  An example of an option inconsistency would be where one peer uses
-.B \-\-dev tun
-while the other peer uses
-.B \-\-dev tap.
-
-Use of this option is discouraged, but is provided as
-a temporary fix in situations where a recent version of OpenVPN must
-connect to an old version.
-.\"*********************************************************
-.TP
-.B \-\-user user
-Change the user ID of the OpenVPN process to
-.B user
-after initialization, dropping privileges in the process.
-This option is useful to protect the system
-in the event that some hostile party was able to gain control of
-an OpenVPN session.  Though OpenVPN's security features make
-this unlikely, it is provided as a second line of defense.
-
-By setting
-.B user
-to
-.I nobody
-or somebody similarly unprivileged, the hostile party would be
-limited in what damage they could cause.  Of course once
-you take away privileges, you cannot return them
-to an OpenVPN session.  This means, for example, that if
-you want to reset an OpenVPN daemon with a
-.B SIGUSR1
-signal
-(for example in response
-to a DHCP reset), you should make use of one or more of the
-.B \-\-persist
-options to ensure that OpenVPN doesn't need to execute any privileged
-operations in order to restart (such as re\-reading key files
-or running
-.BR ifconfig
-on the TUN device).
-.\"*********************************************************
-.TP
-.B \-\-group group
-Similar to the
-.B \-\-user
-option,
-this option changes the group ID of the OpenVPN process to
-.B group
-after initialization.
-.\"*********************************************************
-.TP
-.B \-\-cd dir
-Change directory to
-.B dir
-prior to reading any files such as
-configuration files, key files, scripts, etc.
-.B dir
-should be an absolute path, with a leading "/",
-and without any references
-to the current directory such as "." or "..".
-
-This option is useful when you are running
-OpenVPN in 
-.B \-\-daemon
-mode, and you want to consolidate all of
-your OpenVPN control files in one location.
-.\"*********************************************************
-.TP
-.B \-\-chroot dir
-Chroot to
-.B dir
-after initialization.  
-.B \-\-chroot
-essentially redefines
-.B dir
-as being the top
-level directory tree (/).  OpenVPN will therefore
-be unable to access any files outside this tree.
-This can be desirable from a security standpoint.
-
-Since the chroot operation is delayed until after
-initialization, most OpenVPN options that reference
-files will operate in a pre\-chroot context.
-
-In many cases, the
-.B dir
-parameter can point to an empty directory, however
-complications can result when scripts or restarts
-are executed after the chroot operation.
-
-Note: The SSL library will probably need /dev/urandom to be available inside
-the chroot directory
-.B dir.
-This is because SSL libraries occasionally need to collect fresh random.  Newer
-linux kernels and some BSDs implement a getrandom() or getentropy() syscall
-that removes the need for /dev/urandom to be available.
-.\"*********************************************************
-.TP
-.B \-\-setcon context
-Apply SELinux
-.B context
-after initialization. This
-essentially provides the ability to restrict OpenVPN's
-rights to only network I/O operations, thanks to
-SELinux. This goes further than
-.B \-\-user
-and
-.B \-\-chroot
-in that those two, while being great security features,
-unfortunately do not protect against privilege escalation
-by exploitation of a vulnerable system call. You can of
-course combine all three, but please note that since
-setcon requires access to /proc you will have to provide
-it inside the chroot directory (e.g. with mount \-\-bind).
-
-Since the setcon operation is delayed until after
-initialization, OpenVPN can be restricted to just
-network\-related system calls, whereas by applying the
-context before startup (such as the OpenVPN one provided
-in the SELinux Reference Policies) you will have to
-allow many things required only during initialization.
-
-Like with chroot, complications can result when scripts
-or restarts are executed after the setcon operation,
-which is why you should really consider using the
-.B \-\-persist\-key
-and
-.B \-\-persist\-tun
-options.
-.\"*********************************************************
-.TP
-.B \-\-daemon [progname]
-Become a daemon after all initialization functions are completed.
-This option will cause all message and error output to
-be sent to the syslog file (such as /var/log/messages),
-except for the output of scripts and
-ifconfig commands,
-which will go to /dev/null unless otherwise redirected.
-The syslog redirection occurs immediately at the point
-that
-.B \-\-daemon
-is parsed on the command line even though
-the daemonization point occurs later.  If one of the
-.B \-\-log
-options is present, it will supersede syslog
-redirection.
-
-The optional
-.B progname
-parameter will cause OpenVPN to report its program name
-to the system logger as
-.B progname.
-This can be useful in linking OpenVPN messages
-in the syslog file with specific tunnels.
-When unspecified,
-.B progname
-defaults to "openvpn".
-
-When OpenVPN is run with the
-.B \-\-daemon
-option, it will try to delay daemonization until the majority of initialization
-functions which are capable of generating fatal errors are complete.  This means
-that initialization scripts can test the return status of the
-openvpn command for a fairly reliable indication of whether the command
-has correctly initialized and entered the packet forwarding event loop.
-
-In OpenVPN, the vast majority of errors which occur after initialization are non\-fatal.
-
-Note: as soon as OpenVPN has daemonized, it can not ask for usernames,
-passwords, or key pass phrases anymore.  This has certain consequences,
-namely that using a password\-protected private key will fail unless the
-.B \-\-askpass
-option is used to tell OpenVPN to ask for the pass phrase (this
-requirement is new in v2.3.7, and is a consequence of calling daemon()
-before initializing the crypto layer).
-
-Further, using
-.B \-\-daemon
-together with
-.B \-\-auth\-user\-pass
-(entered on console) and
-.B \-\-auth\-nocache
-will fail as soon as key renegotiation (and reauthentication) occurs.
-.\"*********************************************************
-.TP
-.B \-\-syslog [progname]
-Direct log output to system logger, but do not become a daemon.
-See
-.B \-\-daemon
-directive above for description of
-.B progname
-parameter.
-.TP
-.B \-\-errors\-to\-stderr
-Output errors to stderr instead of stdout unless log output is redirected by one of the
-.B \-\-log
-options.
-.\"*********************************************************
-.TP
-.B \-\-passtos
-Set the TOS field of the tunnel packet to what the payload's TOS is.
-.\"*********************************************************
-.TP
-.B \-\-inetd [wait|nowait] [progname]
-Use this option when OpenVPN is being run from the inetd or
-.BR xinetd(8)
-server.
-
-The
-.B wait/nowait
-option must match what is specified in the inetd/xinetd
-config file.  The
-.B nowait
-mode can only be used with
-.B \-\-proto tcp\-server.
-The default is
-.B wait.
-The
-.B nowait
-mode can be used to instantiate the OpenVPN daemon as a classic TCP server,
-where client connection requests are serviced on a single
-port number.  For additional information on this kind of configuration,
-see the OpenVPN FAQ:
-.I http://openvpn.net/faq.html#oneport
-
-This option precludes the use of
-.B \-\-daemon, \-\-local,
-or
-.B \-\-remote.
-Note that this option causes message and error output to be handled in the same
-way as the
-.B \-\-daemon
-option.  The optional
-.B progname
-parameter is also handled exactly as in
-.B \-\-daemon.
-
-Also note that in
-.B wait
-mode, each OpenVPN tunnel requires a separate TCP/UDP port and
-a separate inetd or xinetd entry.  See the OpenVPN 1.x HOWTO for an example
-on using OpenVPN with xinetd:
-.I http://openvpn.net/1xhowto.html
-.\"*********************************************************
-.TP
-.B \-\-log file
-Output logging messages to
-.B file,
-including output to stdout/stderr which
-is generated by called scripts.
-If
-.B file
-already exists it will be truncated.
-This option takes effect
-immediately when it is parsed in the command line
-and will supersede syslog output if
-.B \-\-daemon
-or
-.B \-\-inetd
-is also specified.
-This option is persistent over the entire course of
-an OpenVPN instantiation and will not be reset by SIGHUP,
-SIGUSR1, or
-.B \-\-ping\-restart.
-
-Note that on Windows, when OpenVPN is started as a service,
-logging occurs by default without the need to specify
-this option.
-.\"*********************************************************
-.TP
-.B \-\-log\-append file
-Append logging messages to
-.B file.
-If
-.B file
-does not exist, it will be created.
-This option behaves exactly like
-.B \-\-log
-except that it appends to rather
-than truncating the log file.
-.\"*********************************************************
-.TP
-.B \-\-suppress\-timestamps
-Avoid writing timestamps to log messages, even when they
-otherwise would be prepended. In particular, this applies to
-log messages sent to stdout.
-.\"*********************************************************
-.TP
-.B \-\-machine\-readable\-output
-Always write timestamps and message flags to log messages, even when they
-otherwise would not be prefixed. In particular, this applies to
-log messages sent to stdout.
-.\"*********************************************************
-.TP
-.B \-\-writepid file
-Write OpenVPN's main process ID to
-.B file.
-.\"*********************************************************
-.TP
-.B \-\-nice n
-Change process priority after initialization
-(
-.B n
-greater than 0 is lower priority,
-.B n
-less than zero is higher priority).
-.\"*********************************************************
-.\".TP
-.\".B \-\-nice\-work n
-.\"Change priority of background TLS work thread.  The TLS thread
-.\"feature is enabled when OpenVPN is built
-.\"with pthread support, and you are running OpenVPN
-.\"in TLS mode (i.e. with
-.\".B \-\-tls\-client
-.\"or
-.\".B \-\-tls\-server
-.\"specified).
-.\"
-.\"Using a TLS thread offloads the CPU\-intensive process of SSL/TLS\-based
-.\"key exchange to a background thread so that it does not become
-.\"a latency bottleneck in the tunnel packet forwarding process.
-.\"
-.\"The parameter
-.\".B n
-.\"is interpreted exactly as with the
-.\".B \-\-nice
-.\"option above, but in relation to the work thread rather
-.\"than the main thread.
-.\"*********************************************************
-.TP
-.B \-\-fast\-io
-(Experimental) Optimize TUN/TAP/UDP I/O writes by avoiding
-a call to poll/epoll/select prior to the write operation.  The purpose
-of such a call would normally be to block until the device
-or socket is ready to accept the write.  Such blocking is unnecessary
-on some platforms which don't support write blocking on UDP sockets
-or TUN/TAP devices.  In such cases, one can optimize the event loop
-by avoiding the poll/epoll/select call, improving CPU efficiency
-by 5% to 10%.
-
-This option can only be used on non\-Windows systems, when
-.B \-\-proto udp
-is specified, and when
-.B \-\-shaper
-is NOT specified.
-.\"*********************************************************
-.TP
-.B \-\-multihome
-Configure a multi\-homed UDP server.  This option needs to be used when
-a server has more than one IP address (e.g. multiple interfaces, or
-secondary IP addresses), and is not using
-.B \-\-local
-to force binding to one specific address only.  This option will
-add some extra lookups to the packet path to ensure that the UDP reply
-packets are always sent from the address that the client is
-talking to. This is not supported on all platforms, and it adds more
-processing, so it's not enabled by default.
-
-Note: this option is only relevant for UDP servers.
-
-Note 2: if you do an IPv6+IPv4 dual\-stack bind on a Linux machine with
-multiple IPv4 address, connections to IPv4 addresses will not work
-right on kernels before 3.15, due to missing kernel support for the
-IPv4\-mapped case (some distributions have ported this to earlier kernel
-versions, though).
-.\"*********************************************************
-.TP
-.B \-\-echo [parms...]
-Echo
-.B parms
-to log output.
-
-Designed to be used to send messages to a controlling application
-which is receiving the OpenVPN log output.
-.\"*********************************************************
-.TP
-.B \-\-remap\-usr1 signal
-Control whether internally or externally
-generated SIGUSR1 signals are remapped to
-SIGHUP (restart without persisting state) or
-SIGTERM (exit).
-
-.B signal
-can be set to "SIGHUP" or "SIGTERM".  By default, no remapping
-occurs.
-.\"*********************************************************
-.TP
-.B \-\-verb n
-Set output verbosity to
-.B n
-(default=1).  Each level shows all info from the previous levels.
-Level 3 is recommended if you want a good summary
-of what's happening without being swamped by output.
-
-.B 0 \-\-
-No output except fatal errors.
-.br
-.B 1 to 4 \-\-
-Normal usage range.
-.br
-.B 5 \-\-
-Output
-.B R
-and
-.B W
-characters to the console for each packet read and write, uppercase is
-used for TCP/UDP packets and lowercase is used for TUN/TAP packets.
-.br
-.B 6 to 11 \-\-
-Debug info range (see errlevel.h for additional
-information on debug levels).
-.\"*********************************************************
-.TP
-.B \-\-status file [n]
-Write operational status to
-.B file
-every
-.B n
-seconds.
-
-Status can also be written to the syslog by sending a
-.B SIGUSR2
-signal.
-
-With multi\-client capability enabled on a server, the status file includes a
-list of clients and a routing table. The output format can be controlled by the
-.B \-\-status\-version
-option in that case.
-
-For clients or instances running in point\-to\-point mode, it will contain the
-traffic statistics.
-.\"*********************************************************
-.TP
-.B \-\-status\-version [n]
-Set the status file format version number to
-.B n\fR.
-
-This only affects the status file on servers with multi\-client capability
-enabled.
-
-.B 1
-\-\- traditional format (default). The client list contains the following
-fields comma\-separated: Common Name, Real Address, Bytes Received, Bytes Sent,
-Connected Since.
-.br
-.B 2
-\-\- a more reliable format for external processing. Compared to version 1, the
-client list contains some additional fields: Virtual Address, Virtual IPv6
-Address, Username, Client ID, Peer ID, Data Channel Cipher.
-Future versions may extend the number of fields.
-.br
-.B 3
-\-\- identical to 2, but fields are tab\-separated.
-
-.\"*********************************************************
-.TP
-.B \-\-mute n
-Log at most
-.B n
-consecutive messages in the same category.  This is useful to
-limit repetitive logging of similar message types.
-.\"*********************************************************
-.TP
-.B \-\-compress [algorithm]
-Enable a compression algorithm.
-
-The
-.B algorithm
-parameter may be "lzo", "lz4", "lz4\-v2", "stub", "stub\-v2" or empty.
-LZO and LZ4 are different compression algorithms, with LZ4 generally
-offering the best performance with least CPU usage.
-For backwards compatibility with OpenVPN versions before v2.4, use "lzo"
-(which is identical to the older option "\-\-comp\-lzo yes").
-
-The "lz4\-v2" and "stub\-v2" variants implement a better framing that does not add
-overhead when packets cannot be compressed. All other variants always add one extra
-framing byte compared to no compression framing.
-
-If the
-.B algorithm
-parameter is "stub", "stub\-v2", or empty, compression will be turned off, but
-the packet framing for compression will still be enabled, allowing a different
-setting to be pushed later. Additionally, "stub" and "stub\-v2" will disable
-announcing lzo and lz4 compression support via "IV_" variables to the server.
-
-
-.B Security Considerations
-
-Compression and encryption is a tricky combination.  If an attacker knows or is
-able to control (parts of) the plaintext of packets that contain secrets, the
-attacker might be able to extract the secret if compression is enabled.  See
-e.g. the CRIME and BREACH attacks on TLS and VORACLE on VPNs which also leverage
-compression to break encryption.  If you are not entirely sure that the above does
-not apply to your traffic, you are advised to *not* enable compression.
-
-.\"*********************************************************
-.TP
-.B \-\-allow\-compression [mode]
-As described in
-\.B \-\-compress
-option, compression is potentially dangerous option. This option allows
-controlling the behaviour of OpenVPN when compression is used and allowed.
-.B mode
-may be "yes", "no", or "asym" (default).
-
-With allow\-compression set to "no", OpenVPN will refuse any non stub
-compression. With "yes" OpenVPN will send and receive compressed packets.
-With "asym", the default, OpenVPN will only decompress (downlink) packets but
-not compress (uplink) packets. This also allows migrating to disable compression
-when changing both server and client configurations to remove compression at the
-same time is not a feasible option.
-
-The default of asym has been chosen to maximise compatibility with existing
-configuration while at the same time phasing out compression in existing
-deployment by disabling compression on the uplink, effectively completely disabling
-compression if both client and server are upgraded.
-
-.\"*********************************************************
-.TP
-.B \-\-comp\-lzo [mode]
-.B DEPRECATED
-This option will be removed in a future OpenVPN release.  Use the
-newer
-.B \-\-compress
-instead.
-
-Use LZO compression \-\- may add up to 1 byte per
-packet for incompressible data.
-.B mode
-may be "yes", "no", or "adaptive" (default).
-
-In a server mode setup, it is possible to selectively turn
-compression on or off for individual clients.
-
-First, make sure the client\-side config file enables selective
-compression by having at least one
-.B \-\-comp\-lzo
-directive, such as
-.B \-\-comp\-lzo no.
-This will turn off compression by default,
-but allow a future directive push from the server to
-dynamically change the
-on/off/adaptive setting.
-
-Next in a
-.B \-\-client\-config\-dir
-file, specify the compression setting for the client,
-for example:
-
-.nf
-.ft 3
-.in +4
-comp\-lzo yes
-push "comp\-lzo yes"
-.in -4
-.ft
-.fi
-
-The first line sets the
-.B comp\-lzo
-setting for the server
-side of the link, the second sets the client side.
-.\"*********************************************************
-.TP
-.B \-\-comp\-noadapt
-When used in conjunction with
-.B \-\-comp\-lzo,
-this option will disable OpenVPN's adaptive compression algorithm.
-Normally, adaptive compression is enabled with
-.B \-\-comp\-lzo.
-
-Adaptive compression tries to optimize the case where you have
-compression enabled, but you are sending predominantly incompressible
-(or pre\-compressed) packets over the tunnel, such as an FTP or rsync transfer
-of a large, compressed file.  With adaptive compression,
-OpenVPN will periodically sample the compression process to measure its
-efficiency.  If the data being sent over the tunnel is already compressed,
-the compression efficiency will be very low, triggering openvpn to disable
-compression for a period of time until the next re\-sample test.
-.\"*********************************************************
-.TP
-.B \-\-management socket\-name unix [pw\-file] \ \ \ \ \ (recommended)
-.TQ
-.B \-\-management IP port [pw\-file]
-Enable a management server on a
-.B socket\-name
-Unix socket on those platforms supporting it, or on
-a designated TCP port.
-
-.B pw\-file
-, if specified, is a password file where the password must be on first line.
-Instead of a filename it can use the keyword stdin which will prompt the user
-for a password to use when OpenVPN is starting.
-
-For unix sockets, the  default  behaviour  is to create a unix domain socket
-that may be connected to by any process.  Use the
-.B \-\-management\-client\-user
-and
-.B \-\-management\-client\-group
-directives to restrict access.
-
-The management interface provides a special mode where the TCP management link
-can operate over the tunnel itself.  To enable this mode, set IP to
-.B tunnel.
-Tunnel mode will cause the  management interface to listen for a
-TCP connection on the local VPN address of the TUN/TAP interface.
-
-.B BEWARE
-of enabling the management interface over TCP.  In  these cases you should
-.I ALWAYS
-make use of
-.B pw\-file
-to password protect the management interface.  Any user who can connect to this
-TCP
-.B IP:port
-will be able to manage and control (and interfere with) the OpenVPN process.
-It is also strongly recommended to set IP to 127.0.0.1 (localhost) to restrict
-accessibility of the management server to local clients.
-
-While the management port is designed for  programmatic control of OpenVPN by
-other applications, it is possible to telnet to the port, using a telnet client
-in "raw" mode.  Once  connected, type "help" for a list of commands.
-
-For detailed documentation on the management interface, see the
-.I management\-notes.txt
-file in the management folder of the OpenVPN source distribution.
-
-.TP
-.B \-\-management\-client
-Management interface will connect as a TCP/unix domain client to
-.B IP:port
-specified by
-.B \-\-management
-rather than listen as a TCP server or on a unix domain socket.
-
-If the client connection fails to connect or is disconnected,
-a SIGTERM signal will be generated causing OpenVPN to quit.
-.\"*********************************************************
-.TP
-.B \-\-management\-query\-passwords
-Query management channel for private key password and
-.B \-\-auth\-user\-pass
-username/password.  Only query the management channel
-for inputs which ordinarily would have been queried from the
-console.
-.\"*********************************************************
-.TP
-.B \-\-management\-query\-proxy
-Query management channel for proxy server information for a specific
-.B \-\-remote
-(client\-only).
-.\"*********************************************************
-.TP
-.B \-\-management\-query\-remote
-Allow management interface to override
-.B \-\-remote
-directives (client\-only).
-.\"*********************************************************
-.TP
-.B \-\-management\-external\-key [nopadding] [pkcs1]
-Allows usage for external private key file instead of
-.B \-\-key
-option (client\-only). The optional parameters
-.B nopadding
-and
-.B pkcs1
-signal support for different padding algorithms. See
-doc/mangement-notes.txt for a complete description of this
-feature.
-.\"*********************************************************
-.TP
-.B \-\-management\-external\-cert certificate\-hint
-Allows usage for external certificate instead of
-.B \-\-cert
-option (client\-only).
-.B certificate\-hint
-is an arbitrary string which is passed to a management
-interface client as an argument of NEED\-CERTIFICATE notification.
-Requires \-\-management\-external\-key.
-.\"*********************************************************
-.TP
-.B \-\-management\-forget\-disconnect
-Make OpenVPN forget passwords when management session
-disconnects.
-
-This directive does not affect the
-.B \-\-http\-proxy
-username/password.  It is always cached.
-.\"*********************************************************
-.TP
-.B \-\-management\-hold
-Start OpenVPN in a hibernating state, until a client
-of the management interface explicitly starts it
-with the
-.B hold release
-command.
-.\"*********************************************************
-.TP
-.B \-\-management\-signal
-Send SIGUSR1 signal to OpenVPN if management session disconnects.
-This is useful when you wish to disconnect an OpenVPN session on
-user logoff. For \-\-management\-client this option is not needed since
-a disconnect will always generate a SIGTERM.
-.\"*********************************************************
-.TP
-.B \-\-management\-log\-cache n
-Cache the most recent
-.B n
-lines of log file history for usage
-by the management channel.
-.\"*********************************************************
-.TP
-.B \-\-management\-up\-down
-Report tunnel up/down events to management interface.
-.B 
-.\"*********************************************************
-.TP
-.B \-\-management\-client\-auth
-Gives management interface client the responsibility
-to authenticate clients after their client certificate
-has been verified.  See management\-notes.txt in OpenVPN
-distribution for detailed notes.
-.\"*********************************************************
-.TP
-.B \-\-management\-client\-pf
-Management interface clients must specify a packet
-filter file for each connecting client.  See management\-notes.txt
-in OpenVPN distribution for detailed notes.
-.\"*********************************************************
-.TP
-.B \-\-management\-client\-user u
-When the management interface is listening on a unix domain socket,
-only allow connections from user
-.B u.
-.\"*********************************************************
-.TP
-.B \-\-management\-client\-group g
-When the management interface is listening on a unix domain socket,
-only allow connections from group
-.B g.
-.\"*********************************************************
-.TP
-.B \-\-plugin module\-pathname [init\-string]
-Load plug\-in module from the file
-.B module\-pathname,
-passing
-.B init\-string
-as an argument
-to the module initialization function.  Multiple
-plugin modules may be loaded into one OpenVPN
-process.
-
-The
-.B module\-pathname
-argument can be just a filename or a filename with a relative
-or absolute path.  The format of the filename and path defines
-if the plug\-in will be loaded from a default plug\-in directory
-or outside this directory.
-
-.nf
-.ft 3
-.in +4
-.B \-\-plugin path\ \ \ \ \ \ \ \ Effective directory used
-====================================================
- myplug.so            DEFAULT_DIR/myplug.so
- subdir/myplug.so     DEFAULT_DIR/subdir/myplug.so
- ./subdir/myplug.so   CWD/subdir/myplug.so
- /usr/lib/my/plug.so  /usr/lib/my/plug.so
-.in -4
-.fi
-
-DEFAULT_DIR is replaced by the default plug\-in directory,
-which is configured at the build time of OpenVPN.  CWD is the
-current directory where OpenVPN was started or the directory
-OpenVPN have switched into via the
-.B \-\-cd
-option before the
-.B \-\-plugin
-option.
-
-For more information and examples on how to build OpenVPN
-plug\-in modules, see the README file in the
-.B plugin
-folder of the OpenVPN source distribution.
-
-If you are using an RPM install of OpenVPN, see
-/usr/share/openvpn/plugin.  The documentation is
-in
-.B doc
-and the actual plugin modules are in
-.B lib.
-
-Multiple plugin modules can be cascaded, and modules can be
-used in tandem with scripts.  The modules will be called by
-OpenVPN in the order that they are declared in the config
-file.  If both a plugin and script are configured for the same
-callback, the script will be called last.  If the
-return code of the module/script controls an authentication
-function (such as tls\-verify, auth\-user\-pass\-verify, or
-client\-connect), then
-every module and script must return success (0) in order for
-the connection to be authenticated.
-.\"*********************************************************
-.TP
-.B \-\-keying\-material\-exporter label len
-Save Exported Keying Material [RFC5705] of len bytes (must be
-between 16 and 4095 bytes) using label in environment
-(exported_keying_material) for use by plugins in
-OPENVPN_PLUGIN_TLS_FINAL callback.
-
-Note that exporter labels have the potential to collide with existing PRF
-labels. In order to prevent this, labels MUST begin with "EXPORTER".
-
-.\"*********************************************************
-.SS Server Mode
-Starting with OpenVPN 2.0, a multi\-client TCP/UDP server mode
-is supported, and can be enabled with the
-.B \-\-mode server
-option.  In server mode, OpenVPN will listen on a single
-port for incoming client connections.  All client
-connections will be routed through a single tun or tap
-interface.  This mode is designed for scalability and should
-be able to support hundreds or even thousands of clients
-on sufficiently fast hardware.  SSL/TLS authentication must
-be used in this mode.
-.\"*********************************************************
-.TP
-.B \-\-server network netmask ['nopool']
-A helper directive designed to simplify the configuration
-of OpenVPN's server mode.  This directive will set up an
-OpenVPN server which will allocate addresses to clients
-out of the given network/netmask.  The server itself
-will take the ".1" address of the given network
-for use as the server\-side endpoint of the local
-TUN/TAP interface.
-
-For example,
-.B \-\-server 10.8.0.0 255.255.255.0
-expands as follows:
-
-.nf
-.ft 3
-.in +4
- mode server
- tls\-server
- push "topology [topology]"
-
- if dev tun AND (topology == net30 OR topology == p2p):
-   ifconfig 10.8.0.1 10.8.0.2
-   if !nopool:
-     ifconfig\-pool 10.8.0.4 10.8.0.251
-   route 10.8.0.0 255.255.255.0
-   if client\-to\-client:
-     push "route 10.8.0.0 255.255.255.0"
-   else if topology == net30:
-     push "route 10.8.0.1"
-
- if dev tap OR (dev tun AND topology == subnet):
-   ifconfig 10.8.0.1 255.255.255.0
-   if !nopool:
-     ifconfig\-pool 10.8.0.2 10.8.0.253 255.255.255.0
-   push "route\-gateway 10.8.0.1"
-   if route\-gateway unset:
-     route\-gateway 10.8.0.2
-
-.in -4
-.ft
-.fi
-
-Don't use
-.B \-\-server
-if you are ethernet bridging.  Use
-.B \-\-server\-bridge
-instead.
-.\"*********************************************************
-.TP
-.B \-\-server\-bridge gateway netmask pool\-start\-IP pool\-end\-IP
-.TP
-.B \-\-server\-bridge ['nogw']
-
-A helper directive similar to
-.B \-\-server
-which is designed to simplify the configuration
-of OpenVPN's server mode in ethernet bridging configurations.
-
-If
-.B \-\-server\-bridge
-is used without any parameters, it will enable a DHCP\-proxy
-mode, where connecting OpenVPN clients will receive an IP
-address for their TAP adapter from the DHCP server running
-on the OpenVPN server\-side LAN.
-Note that only clients that support
-the binding of a DHCP client with the TAP adapter (such as
-Windows) can support this mode.  The optional 
-.B nogw
-flag (advanced) indicates that gateway information should not be
-pushed to the client.
-
-To configure ethernet bridging, you 
-must first use your OS's bridging capability
-to bridge the TAP interface with the ethernet
-NIC interface.  For example, on Linux this is done
-with the
-.B brctl
-tool, and with Windows XP it is done in the Network
-Connections Panel by selecting the ethernet and
-TAP adapters and right\-clicking on "Bridge Connections".
-
-Next you you must manually set the
-IP/netmask on the bridge interface.  The
-.B gateway
-and
-.B netmask
-parameters to
-.B \-\-server\-bridge
-can be set to either the IP/netmask of the
-bridge interface, or the IP/netmask of the
-default gateway/router on the bridged
-subnet.
-
-Finally, set aside a IP range in the bridged
-subnet,
-denoted by
-.B pool\-start\-IP
-and
-.B pool\-end\-IP,
-for OpenVPN to allocate to connecting
-clients.
-
-For example,
-.B server\-bridge 10.8.0.4 255.255.255.0 10.8.0.128 10.8.0.254
-expands as follows:
-
-.nf
-.ft 3
-.in +4
-mode server
-tls\-server
-
-ifconfig\-pool 10.8.0.128 10.8.0.254 255.255.255.0
-push "route\-gateway 10.8.0.4"
-.in -4
-.ft
-.fi
-
-In another example,
-.B \-\-server\-bridge
-(without parameters) expands as follows:
-
-.nf
-.ft 3
-.in +4
-mode server
-tls\-server
-
-push "route\-gateway dhcp"
-.in -4
-.ft
-.fi
-
-Or
-.B \-\-server\-bridge nogw
-expands as follows:
-
-.nf
-.ft 3
-.in +4
-mode server
-tls\-server
-.in -4
-.ft
-.fi
-.\"*********************************************************
-.TP
-.B \-\-push "option"
-Push a config file option back to the client for remote
-execution.  Note that
-.B
-option
-must be enclosed in double quotes ("").  The client must specify
-.B \-\-pull
-in its config file.  The set of options which can be
-pushed is limited by both feasibility and security.
-Some options such as those which would execute scripts
-are banned, since they would effectively allow a compromised
-server to execute arbitrary code on the client.
-Other options such as TLS or MTU parameters
-cannot be pushed because the client needs to know
-them before the connection to the server can be initiated.
-
-This is a partial list of options which can currently be pushed:
-.B \-\-route, \-\-route\-gateway, \-\-route\-delay, \-\-redirect\-gateway,
-.B \-\-ip\-win32, \-\-dhcp\-option,
-.B \-\-inactive, \-\-ping, \-\-ping\-exit, \-\-ping\-restart,
-.B \-\-setenv,
-.B \-\-auth\-token,
-.B \-\-persist\-key, \-\-persist\-tun, \-\-echo,
-.B \-\-comp\-lzo,
-.B \-\-socket\-flags,
-.B \-\-sndbuf, \-\-rcvbuf
-.\"*********************************************************
-.TP
-.B \-\-push\-reset
-Don't inherit the global push list for a specific client instance.
-Specify this option in a client\-specific context such
-as with a
-.B \-\-client\-config\-dir
-configuration file.  This option will ignore
-.B \-\-push
-options at the global config file level.
-.\"*********************************************************
-.TP
-.B \-\-push\-remove opt
-selectively remove all
-.B \-\-push
-options matching "opt" from the option list for a client.  "opt" is matched
-as a substring against the whole option string to\-be\-pushed to the client, so
-.B \-\-push\-remove route
-would remove all
-.B \-\-push route ...
-and
-.B \-\-push route\-ipv6 ...
-statements, while
-.B \-\-push\-remove 'route\-ipv6 2001:'
-would only remove IPv6 routes for 2001:... networks.
-
-.B \-\-push\-remove
-can only be used in a client\-specific context, like in a
-.B \-\-client\-config\-dir
-file, or
-.B \-\-client\-connect
-script or plugin \-\- similar to
-.B \-\-push\-reset,
-just more selective.
-
-NOTE: to
-.I change
-an option,
-.B \-\-push\-remove
-can be used to first remove the old value, and then add a new
-.B \-\-push
-option with the new value.
-
-NOTE2: due to implementation details, 'ifconfig' and 'ifconfig-ipv6'
-can only be removed with an exact match on the option ("push-remove ifconfig"),
-no substring matching and no matching on the IPv4/IPv6 address argument
-is possible.
-.\"*********************************************************
-.TP
-.B \-\-push\-peer\-info
-Push additional information about the client to server.
-The following data is always pushed to the server:
-
-IV_VER=<version> \-\- the client OpenVPN version
-
-IV_PLAT=[linux|solaris|openbsd|mac|netbsd|freebsd|win] \-\- the client OS platform
-
-IV_LZO_STUB=1 \-\- if client was built with LZO stub capability
-
-IV_LZ4=1 \-\- if the client supports LZ4 compressions.
-
-IV_PROTO=2 \-\- if the client supports peer\-id floating mechanism
-
-IV_NCP=2 \-\- negotiable ciphers, client supports
-.B \-\-cipher
-pushed by the server, a value of 2 or greater indicates client
-supports AES\-GCM\-128 and AES\-GCM\-256.
-
-IV_CIPHERS=<ncp\-ciphers> \-\- the client pushes the list of configured
-ciphers with the
-\.B -\-\ncp\-ciphers
-option to the server.
-
-IV_GUI_VER=<gui_id> <version> \-\- the UI version of a UI if one is
-running, for example "de.blinkt.openvpn 0.5.47" for the
-Android app.
-
-When
-.B \-\-push\-peer\-info
-is enabled the additional information consists of the following data:
-
-IV_HWADDR=<mac address> \-\- the MAC address of clients default gateway
-
-IV_SSL=<version string> \-\- the ssl version used by the client, e.g. "OpenSSL 1.0.2f 28 Jan 2016".
-
-IV_PLAT_VER=x.y \- the version of the operating system, e.g. 6.1 for Windows 7.
-
-UV_<name>=<value> \-\- client environment variables whose names start with "UV_"
-.\"*********************************************************
-.TP
-.B \-\-disable
-Disable a particular client (based on the common name)
-from connecting.  Don't use this option to disable a client
-due to key or password compromise.  Use a CRL (certificate
-revocation list) instead (see the
-.B \-\-crl\-verify
-option).
-
-This option must be associated with a specific client instance,
-which means that it must be specified either in a client
-instance config file using
-.B \-\-client\-config\-dir
-or dynamically generated using a
-.B \-\-client\-connect
-script.
-.\"*********************************************************
-.TP
-.B \-\-ifconfig\-pool start\-IP end\-IP [netmask]
-Set aside a pool of subnets to be
-dynamically allocated to connecting clients, similar
-to a DHCP server.  For tun\-style
-tunnels, each client will be given a /30 subnet (for
-interoperability with Windows clients).  For tap\-style
-tunnels, individual addresses will be allocated, and the
-optional
-.B netmask
-parameter will also be pushed to clients.
-
-.\"*********************************************************
-.TP
-.B \-\-ifconfig\-pool\-persist file [seconds]
-Persist/unpersist ifconfig\-pool
-data to
-.B file,
-at
-.B seconds
-intervals (default=600), as well as on program startup and
-shutdown.
-
-The goal of this option is to provide a long\-term association
-between clients (denoted by their common name) and the virtual
-IP address assigned to them from the ifconfig\-pool.
-Maintaining a long\-term
-association is good for clients because it allows them
-to effectively use the
-.B \-\-persist\-tun
-option.
-
-.B file
-is a comma\-delimited ASCII file, formatted as
-<Common\-Name>,<IP\-address>.
-
-If
-.B seconds
-= 0,
-.B file
-will be treated as read\-only.  This is useful if
-you would like to treat
-.B file
-as a configuration file.
-
-Note that the entries in this file are treated by OpenVPN as
-suggestions only, based on past associations between
-a common name and IP address.  They do not guarantee that the given common
-name will always receive the given IP address.  If you want guaranteed
-assignment, use
-.B \-\-ifconfig\-push
-
-.\"*********************************************************
-.TP
-.B \-\-ifconfig\-pool\-linear
-.B DEPRECATED
-This option will be removed in OpenVPN 2.5
-
-Modifies the
-.B \-\-ifconfig\-pool
-directive to
-allocate individual TUN interface addresses for
-clients rather than /30 subnets.  NOTE:  This option
-is incompatible with Windows clients.
-
-This option is deprecated, and should be replaced with
-.B \-\-topology p2p
-which is functionally equivalent.
-.\"*********************************************************
-.TP
-.B \-\-ifconfig\-push local remote\-netmask [alias]
-Push virtual IP endpoints for client tunnel,
-overriding the \-\-ifconfig\-pool dynamic allocation.
-
-The parameters
-.B local
-and
-.B remote\-netmask
-are set according to the
-.B \-\-ifconfig
-directive which you want to execute on the client machine to
-configure the remote end of the tunnel.  Note that the parameters
-.B local
-and
-.B remote\-netmask
-are from the perspective of the client, not the server.  They may be
-DNS names rather than IP addresses, in which case they will be resolved
-on the server at the time of client connection.
-
-The optional
-.B alias
-parameter may be used in cases where NAT causes the client view
-of its local endpoint to differ from the server view.  In this case
-.B local/remote\-netmask
-will refer to the server view while
-.B alias/remote\-netmask
-will refer to the client view.
-
-This option must be associated with a specific client instance,
-which means that it must be specified either in a client
-instance config file using
-.B \-\-client\-config\-dir
-or dynamically generated using a
-.B \-\-client\-connect
-script.
-
-Remember also to include a
-.B \-\-route
-directive in the main OpenVPN config file which encloses
-.B local,
-so that the kernel will know to route it
-to the server's TUN/TAP interface.
-
-OpenVPN's internal client IP address selection algorithm works as
-follows:
-
-.B 1
-\-\- Use
-.B \-\-client\-connect script
-generated file for static IP (first choice).
-.br
-.B 2
-\-\- Use
-.B \-\-client\-config\-dir
-file for static IP (next choice).
-.br
-.B 3
-\-\- Use
-.B \-\-ifconfig\-pool
-allocation for dynamic IP (last choice).
-.br
-.\"*********************************************************
-.TP
-.B \-\-iroute network [netmask]
-Generate an internal route to a specific
-client. The
-.B netmask
-parameter, if omitted, defaults to 255.255.255.255.
-
-This directive can be used to route a fixed subnet from
-the server to a particular client, regardless
-of where the client is connecting from.  Remember
-that you must also add the route to the system
-routing table as well (such as by using the
-.B \-\-route
-directive).  The reason why two routes are needed
-is that the
-.B \-\-route
-directive routes the packet from the kernel
-to OpenVPN.  Once in OpenVPN, the
-.B \-\-iroute
-directive routes to the specific client.
-
-This option must be specified either in a client
-instance config file using
-.B \-\-client\-config\-dir
-or dynamically generated using a
-.B \-\-client\-connect
-script.
-
-The
-.B \-\-iroute
-directive also has an important interaction with
-.B \-\-push
-"route ...".
-.B \-\-iroute
-essentially defines a subnet which is owned by a
-particular client (we will call this client A).
-If you would like other clients to be able to reach A's
-subnet, you can use
-.B \-\-push
-"route ..."
-together with
-.B \-\-client\-to\-client
-to effect this.  In order for all clients to see
-A's subnet, OpenVPN must push this route to all clients
-EXCEPT for A, since the subnet is already owned by A.
-OpenVPN accomplishes this by not
-not pushing a route to a client
-if it matches one of the client's iroutes.
-.\"*********************************************************
-.TP
-.B \-\-client\-to\-client
-Because the OpenVPN server mode handles multiple clients
-through a single tun or tap interface, it is effectively
-a router.  The
-.B \-\-client\-to\-client
-flag tells OpenVPN to internally route client\-to\-client
-traffic rather than pushing all client\-originating traffic
-to the TUN/TAP interface.
-
-When this option is used, each client will "see" the other
-clients which are currently connected.  Otherwise, each
-client will only see the server.  Don't use this option
-if you want to firewall tunnel traffic using
-custom, per\-client rules.
-.\"*********************************************************
-.TP
-.B \-\-duplicate\-cn
-Allow multiple clients with the same common name to concurrently connect.
-In the absence of this option, OpenVPN will disconnect a client instance
-upon connection of a new client having the same common name.
-.\"*********************************************************
-.TP
-.B \-\-client\-connect cmd
-Run
-.B command cmd
-on client connection.
-
-.B cmd
-consists of a path to script (or executable program), optionally
-followed by arguments. The path and arguments may be single\- or double\-quoted
-and/or escaped using a backslash, and should be separated by one or more spaces.
-
-The command is passed the common name
-and IP address of the just\-authenticated client
-as environmental variables (see environmental variable section
-below).  The command is also passed
-the pathname of a freshly created temporary file as the last argument
-(after any arguments specified in
-.B cmd
-), to be used by the command
-to pass dynamically generated config file directives back to OpenVPN.
-
-If the script wants to generate a dynamic config file
-to be applied on the server when the client connects,
-it should write it to the file named by the last argument.
-
-See the
-.B \-\-client\-config\-dir
-option below for options which
-can be legally used in a dynamically generated config file.
-
-Note that the return value of
-.B script
-is significant.  If
-.B script
-returns a non\-zero error status, it will cause the client
-to be disconnected.
-.\"*********************************************************
-.TP
-.B \-\-client\-disconnect cmd
-Like
-.B \-\-client\-connect
-but called on client instance shutdown.  Will not be called
-unless the
-.B \-\-client\-connect
-script and plugins (if defined)
-were previously called on this instance with
-successful (0) status returns.
-
-The exception to this rule is if the
-.B \-\-client\-disconnect
-command or plugins are cascaded, and at least one client\-connect
-function succeeded, then ALL of the client\-disconnect functions for
-scripts and plugins will be called on client instance object deletion,
-even in cases where some of the related client\-connect functions returned
-an error status.
-
-The
-.B \-\-client\-disconnect
-command is passed the same pathname as the corresponding
-.B \-\-client\-connect
-command as its last argument. (after any arguments specified in
-.B cmd
-).
-.B 
-.\"*********************************************************
-.TP
-.B \-\-client\-config\-dir dir
-Specify a directory
-.B dir
-for custom client config files.  After
-a connecting client has been authenticated, OpenVPN will
-look in this directory for a file having the same name
-as the client's X509 common name.  If a matching file
-exists, it will be opened and parsed for client\-specific
-configuration options.  If no matching file is found, OpenVPN
-will instead try to open and parse a default file called
-"DEFAULT", which may be provided but is not required. Note that
-the configuration files must be readable by the OpenVPN process
-after it has dropped it's root privileges.
-
-This file can specify a fixed IP address for a given
-client using
-.B \-\-ifconfig\-push,
-as well as fixed subnets owned by the client using
-.B \-\-iroute.
-
-One of the useful properties of this option is that it
-allows client configuration files to be conveniently
-created, edited, or removed while the server is live,
-without needing to restart the server.
-
-The following
-options are legal in a client\-specific context:
-.B \-\-push, \-\-push\-reset, \-\-push\-remove, \-\-iroute,
-.B \-\-ifconfig\-push, \-\-vlan\-pvid
-and
-.B \-\-config.
-.\"*********************************************************
-.TP
-.B \-\-ccd\-exclusive
-Require, as a
-condition of authentication, that a connecting client has a
-.B \-\-client\-config\-dir
-file.
-.\"*********************************************************
-.TP
-.B \-\-tmp\-dir dir
-Specify a directory
-.B dir
-for temporary files.  This directory will be used by
-openvpn processes and script to communicate temporary
-data with openvpn main process. Note that
-the directory must be writable by the OpenVPN process
-after it has dropped it's root privileges.
-
-This directory will be used by in the following cases:
-
-*
-.B \-\-client\-connect
-scripts to dynamically generate client\-specific
-configuration files.
-
-*
-.B OPENVPN_PLUGIN_AUTH_USER_PASS_VERIFY
-plugin hook to return success/failure via auth_control_file
-when using deferred auth method
-
-*
-.B OPENVPN_PLUGIN_ENABLE_PF
-plugin hook to pass filtering rules via pf_file
-.\"*********************************************************
-.TP
-.B \-\-hash\-size r v
-Set the size of the real address hash table to
-.B r
-and the virtual address table to
-.B v.
-By default, both tables are sized at 256 buckets.
-.\"*********************************************************
-.TP
-.B \-\-bcast\-buffers n
-Allocate
-.B n
-buffers for broadcast datagrams (default=256).
-.\"*********************************************************
-.TP
-.B \-\-tcp\-queue\-limit n
-Maximum number of output packets queued before TCP (default=64).
-
-When OpenVPN is tunneling data from a TUN/TAP device to a
-remote client over a TCP connection, it is possible that the TUN/TAP device
-might produce data at a faster rate than the TCP connection
-can support.  When the number of output packets queued before sending to
-the TCP socket reaches this limit for a given client connection,
-OpenVPN will start to drop outgoing packets directed
-at this client.
-.\"*********************************************************
-.TP
-.B \-\-tcp\-nodelay
-This macro sets the TCP_NODELAY socket flag on the server
-as well as pushes it to connecting clients.  The TCP_NODELAY
-flag disables the Nagle algorithm on TCP sockets causing
-packets to be transmitted immediately with low latency,
-rather than waiting a short period of time in order
-to aggregate several packets into a larger containing
-packet.  In VPN applications over TCP, TCP_NODELAY
-is generally a good latency optimization.
-
-The macro expands as follows:
-
-.nf
-.ft 3
-.in +4
- if mode server:
-   socket\-flags TCP_NODELAY
-   push "socket\-flags TCP_NODELAY"
-.in -4
-.ft
-.fi
-.\"*********************************************************
-.TP
-.B \-\-max\-clients n
-Limit server to a maximum of
-.B n
-concurrent clients.
-.\"*********************************************************
-.TP
-.B \-\-max\-routes\-per\-client n
-Allow a maximum of
-.B n
-internal routes per client (default=256).
-This is designed to
-help contain DoS attacks where an authenticated client floods the
-server with packets appearing to come from many unique MAC addresses,
-forcing the server to deplete
-virtual memory as its internal routing table expands.
-This directive can be used in a
-.B \-\-client\-config\-dir
-file or auto\-generated by a
-.B \-\-client\-connect
-script to override the global value for a particular client.
-
-Note that this
-directive affects OpenVPN's internal routing table, not the
-kernel routing table.
-.\"*********************************************************
-.TP
-.B \-\-stale\-routes\-check n [t]
-Remove routes haven't had activity for
-.B n
-seconds (i.e. the ageing time).
-
-This check is ran every
-.B t
-seconds (i.e. check interval).
-
-If
-.B t
-is not present it defaults to
-.B n
-
-This option helps to keep the dynamic routing table small.
-See also
-.B \-\-max\-routes\-per\-client
-.\"*********************************************************
-.TP
-.B \-\-connect\-freq n sec
-Allow a maximum of
-.B n
-new connections per
-.B sec 
-seconds from clients.  This is designed to contain DoS attacks which flood
-the server with connection requests using certificates which
-will ultimately fail to authenticate.
-
-This is an imperfect solution however, because in a real
-DoS scenario, legitimate connections might also be refused.
-
-For the best protection against DoS attacks in server mode,
-use
-.B \-\-proto udp
-and either
-.B \-\-tls\-auth
-or
-.B \-\-tls\-crypt\fR.
-.\"*********************************************************
-.TP
-.B \-\-learn\-address cmd
-Run command
-.B cmd
-to validate client virtual addresses or routes.
-
-.B cmd
-consists of a path to script (or executable program), optionally
-followed by arguments. The path and arguments may be single\- or double\-quoted
-and/or escaped using a backslash, and should be separated by one or more spaces.
-
-Three arguments will be appended to any arguments in
-.B cmd
-as follows:
-
-.B [1] operation \-\-
-"add", "update", or "delete" based on whether or not
-the address is being added to, modified, or deleted from
-OpenVPN's internal routing table.
-.br
-.B [2] address \-\-
-The address being learned or unlearned.  This can be
-an IPv4 address such as "198.162.10.14", an IPv4 subnet
-such as "198.162.10.0/24", or an ethernet MAC address (when
-.B \-\-dev tap
-is being used) such as "00:FF:01:02:03:04".
-.br
-.B [3] common name \-\-
-The common name on the certificate associated with the
-client linked to this address.  Only present for "add"
-or "update" operations, not "delete".
-
-On "add" or "update" methods, if the script returns
-a failure code (non\-zero), OpenVPN will reject the address
-and will not modify its internal routing table.
-
-Normally, the
-.B cmd
-script will use the information provided above to set
-appropriate firewall entries on the VPN TUN/TAP interface.
-Since OpenVPN provides the association between virtual IP
-or MAC address and the client's authenticated common name,
-it allows a user\-defined script to configure firewall access
-policies with regard to the client's high\-level common name,
-rather than the low level client virtual addresses.
-.\"*********************************************************
-.TP
-.B \-\-auth\-user\-pass\-verify cmd method
-Require the client to provide a username/password (possibly
-in addition to a client certificate) for authentication.
-
-OpenVPN will run
-.B command cmd
-to validate the username/password
-provided by the client.
-
-.B cmd
-consists of a path to script (or executable program), optionally
-followed by arguments. The path and arguments may be single\- or double\-quoted
-and/or escaped using a backslash, and should be separated by one or more spaces.
-
-If
-.B method
-is set to "via\-env", OpenVPN will call
-.B script
-with the environmental variables
-.B username
-and
-.B password
-set to the username/password strings provided by the client.
-Be aware that this method is insecure on some platforms which
-make the environment of a process publicly visible to other
-unprivileged processes.
-
-If
-.B method
-is set to "via\-file", OpenVPN will write the username and
-password to the first two lines of a temporary file.  The filename
-will be passed as an argument to
-.B script,
-and the file will be automatically deleted by OpenVPN after
-the script returns.  The location of the temporary file is
-controlled by the
-.B \-\-tmp\-dir
-option, and will default to the current directory if unspecified.
-For security, consider setting 
-.B \-\-tmp\-dir
-to a volatile storage medium such as
-.B /dev/shm
-(if available) to prevent the username/password file from touching the hard drive.
-
-The script should examine the username
-and password,
-returning a success exit code (0) if the
-client's authentication request is to be accepted, or a failure
-code (1) to reject the client.
-
-This directive is designed to enable a plugin\-style interface
-for extending OpenVPN's authentication capabilities.
-
-To protect against a client passing a maliciously formed
-username or password string, the username string must
-consist only of these characters: alphanumeric, underbar
-('_'), dash ('\-'), dot ('.'), or at ('@').  The password
-string can consist of any printable characters except for
-CR or LF.  Any illegal characters in either the username
-or password string will be converted to underbar ('_').
-
-Care must be taken by any user\-defined scripts to avoid
-creating a security vulnerability in the way that these
-strings are handled.  Never use these strings in such a way
-that they might be escaped or evaluated by a shell interpreter.
-
-For a sample script that performs PAM authentication, see
-.B sample\-scripts/auth\-pam.pl
-in the OpenVPN source distribution.
-.\"*********************************************************
-.TP
-.B \-\-auth\-gen\-token [lifetime] [external-auth]
-After successful user/password authentication, the OpenVPN
-server will with this option generate a temporary
-authentication token and push that to client.  On the following
-renegotiations, the OpenVPN client will pass this token instead
-of the users password.  On the server side the server will do
-the token authentication internally and it will NOT do any
-additional authentications against configured external
-user/password authentication mechanisms.
-
-The tokens implemented by this mechanism include a initial timestamp
-and a renew timestamp and are secured by HMAC.
-
-The
-.B lifetime
-argument defines how long the generated token is valid.  The
-lifetime is defined in seconds.  If lifetime is not set
-or it is set to 0, the token will never expire.
-
-The token will expire either after the configured lifetime of the token 
-is reached or after not being renewed for more than 2 *
-.B reneg\-sec
-seconds.  Clients will be sent renewed tokens on every
-TLS renogiation to keep the client's token updated.  This is done
-to invalidate a token if a client is disconnected for a sufficently long
-time, while at the same time permitting much longer token lifetimes for 
-active clients.
-
-This feature is useful for environments which is configured
-to use One Time Passwords (OTP) as part of the user/password
-authentications and that authentication mechanism does not
-implement any auth\-token support.
-
-When the external-auth keyword is present the normal authentication
-method will always be called even if auth-token succeeds. Normally other
-authentications method are skipped if auth-token verification suceeds or
-fails.
-
-This option postpones this decision to the external authentication methods
-and check the validity of the account and do other checks.
-
-In this mode the environment will have a session_id variable
-that hold the session id from auth-gen-token. Also a environment
-variable session_state is present. This variable tells whether the
-auth-token has succeeded or not. It can have the following values:
-
- - Initial:                    No token from client.
- - Authenticated:              Token is valid and not expired
- - Expired:                    Token is valid but has expired
- - Invalid                     Token is invalid (failed HMAC or wrong length)
- - AuthenticatedEmptyUser/ExpiredEmptyUser
-   The token is not valid with the username send from the client
-   but would be valid (or expired) if we assume an empty username was used
-   instead. These two cases are a workaround for behaviour in OpenVPN3. If
-   this workaround is not needed these two cases should be handled in the
-   same way as Invalid.
-
-.B Warning:
-Use this feature only if you want your authentication method called on
-every verification. Since the external authentication is called it needs
-to also indicate a success or failure of the authentication. It is strongly
-recommended to return an authentication failure in the case of the
-Invalid/Expired auth-token with the external-auth option unless the client
-could authenticate in another acceptable way (e.g. client certificate),
-otherwise returning success will lead to authentication bypass (as does
-returning success on a wrong password from a script).
-
-.\"*********************************************************
-.TP
-.B \-\-auth\-gen\-token\-secret [file]
-Specifies a file that hold a secret for the HMAC used in
-.B \-\-auth\-gen\-token
-If not present OpenVPN will generate a random secret on startup. This file
-should be used if auth-token should valid after restarting a server or if
-client should be able to roam between multiple OpenVPN server with their
-auth\-token.
-
-.\"*********************************************************
-.TP
-.B \-\-opt\-verify
-Clients that connect with options that are incompatible
-with those of the server will be disconnected.
-
-Options that will be compared for compatibility include
-dev\-type, link\-mtu, tun\-mtu, proto, ifconfig,
-comp\-lzo, fragment, keydir, cipher, auth, keysize, secret,
-no\-replay, no\-iv, tls\-auth, key\-method, tls\-server, and tls\-client.
-
-This option requires that
-.B \-\-disable\-occ
-NOT be used.
-.\"*********************************************************
-.TP
-.B \-\-auth\-user\-pass\-optional
-Allow connections by clients that do not specify a username/password.
-Normally, when
-.B \-\-auth\-user\-pass\-verify
-or
-.B \-\-management\-client\-auth
-is specified (or an authentication plugin module), the
-OpenVPN server daemon will require connecting clients to specify a
-username and password.  This option makes the submission of a username/password
-by clients optional, passing the responsibility to the user\-defined authentication
-module/script to accept or deny the client based on other factors
-(such as the setting of X509 certificate fields).  When this option is used,
-and a connecting client does not submit a username/password, the user\-defined
-authentication module/script will see the username and password as being set
-to empty strings ("").  The authentication module/script MUST have logic
-to detect this condition and respond accordingly.
-.\"*********************************************************
-.TP
-.B \-\-client\-cert\-not\-required
-.B DEPRECATED
-This option will be removed in OpenVPN 2.5
-
-Don't require client certificate, client will authenticate
-using username/password only.  Be aware that using this directive
-is less secure than requiring certificates from all clients.
-
-.B Please note:
-This is replaced by
-.B \-\-verify\-client\-cert
-which allows for more flexibility. The option
-.B \-\-verify\-client\-cert none
-is functionally equivalent to
-.B \-\-client\-cert\-not\-required
-.
-
-.\"*********************************************************
-.TP
-.B \-\-verify\-client\-cert none|optional|require
-Specify whether the client is required to supply a valid certificate.
-
-Possible options are
-
-.B none
-: a client certificate is not required. the client need to authenticate
-using username/password only.  Be aware that using this directive
-is less secure than requiring certificates from all clients.
-
-If you use this directive, the
-entire responsibility of authentication will rest on your
-.B \-\-auth\-user\-pass\-verify
-script, so keep in mind that bugs in your script
-could potentially compromise the security of your VPN.
-
-.B \-\-verify\-client\-cert none
-is functionally equivalent to
-.B \-\-client\-cert\-not\-required.
-
-.B optional
-: a client may present a certificate but it is not required to do so.
-When using this directive, you should also use a
-.B \-\-auth\-user\-pass\-verify
-script to ensure that clients are authenticated using a
-certificate, a username and password, or possibly even both.
-
-Again, the entire responsibility of authentication will rest on your
-.B \-\-auth\-user\-pass\-verify
-script, so keep in mind that bugs in your script
-could potentially compromise the security of your VPN.
-
-.B require
-: this is the default option. A client is required to present a
-certificate, otherwise VPN access is refused.
-
-If you don't use this directive (or use
-.B \-\-verify\-client\-cert require
-) but you also specify an
-.B \-\-auth\-user\-pass\-verify
-script, then OpenVPN will perform double authentication.  The
-client certificate verification AND the
-.B \-\-auth\-user\-pass\-verify
-script will need to succeed in order for a client to be
-authenticated and accepted onto the VPN.
-.\"*********************************************************
-.TP
-.B \-\-username\-as\-common\-name
-For
-.B \-\-auth\-user\-pass\-verify
-authentication, use
-the authenticated username as the common name,
-rather than the common name from the client cert.
-.\"*********************************************************
-.TP
-.B \-\-port\-share host port [dir]
-When run in TCP server mode, share the OpenVPN port with
-another application, such as an HTTPS server.  If OpenVPN
-senses a connection to its port which is using a non\-OpenVPN
-protocol, it will proxy the connection to the server at
-.B host:port.
-Currently only designed to work with HTTP/HTTPS,
-though it would be theoretically possible to extend to
-other protocols such as ssh.
-
-.B dir
-specifies an optional directory where a temporary file with name N
-containing content C will be dynamically generated for each proxy
-connection, where N is the source IP:port of the client connection
-and C is the source IP:port of the connection to the proxy
-receiver.  This directory can be used as a dictionary by
-the proxy receiver to determine the origin of the connection.
-Each generated file will be automatically deleted when the proxied
-connection is torn down.
-
-Not implemented on Windows.
-.\"*********************************************************
-.TP
-.B \-\-vlan\-tagging
-Server-only option. Turns the OpenVPN server instance into a switch that
-understands VLAN\-tagging, based on IEEE 802.1Q.
-
-The server TAP device and each of the connecting clients is seen as a port of the
-switch. All client ports are in untagged mode and the server TAP device is
-VLAN-tagged, untagged or accepts both, depending on the
-.B \-\-vlan\-accept setting.
-
-Ethernet frames with a prepended 802.1Q tag are called "tagged". If the VLAN
-Identifier (VID) field in such a tag is non-zero, the frame is called
-"VLAN\-tagged". If the VID is zero, but the Priority Control Point (PCP) field
-is non\-zero, the frame is called "prio\-tagged". If there is no 802.1Q tag, the
-frame is "untagged".
-
-Using the
-.B \-\-vlan\-pvid v
-option once per client (see \-\-client\-config\-dir), each port can be associated
-with a certain VID. Packets
-can only be forwarded between ports having the same VID. Therefore, clients
-with differing VIDs are completely separated from one\-another, even if
-.B \-\-client\-to\-client
-is activated.
-
-The packet filtering takes place in the OpenVPN server. Clients should not
-have any VLAN tagging configuration applied.
-
-The
-.B \-\-vlan\-tagging
-option is off by default. While turned off, OpenVPN
-accepts any Ethernet frame and does not perform any special processing
-for VLAN\-tagged packets.
-
-The option can only be activated in
-.B \-\-dev tap mode.
-
-.\"*********************************************************
-.TP
-.B \-\-vlan\-accept all | tagged | untagged
-Configure the VLAN tagging policy for the server TAP device. The following modes
-are available:
-
-.B tagged
-\-\- Admit only VLAN\-tagged frames.
-Only VLAN\-tagged packets are accepted, while untagged or priority\-tagged
-packets are dropped when entering the server TAP device.
-
-.br
-.B untagged
-\-\- Admit only untagged and prio\-tagged frames.
-.br
-VLAN\-tagged packets are not accepted, while untagged or priority\-tagged
-packets entering the server TAP device are tagged with the value configured
-for the global
-.B \-\-vlan\-pvid
-setting.
-.br
-.B all
-(default) \-\- Admit all frames.
-.br
-All packets are admitted and then treated like untagged or tagged mode
-respectively.
-
-(Note: Some vendors refer to switch ports running in
-.B tagged
-mode as "trunk ports" and switch ports running in
-.B untagged
-mode as "access ports".)
-
-Packets forwarded from clients to the server are VLAN\-tagged
-with the originating client's PVID, unless the VID matches the
-global \-\-vlan\-pvid, in which case the tag is removed.
-
-If no PVID is configured for a given client (see \-\-vlan\-pvid) packets
-are tagged with 1 by default.
-.\"*********************************************************
-.TP
-.B \-\-vlan\-pvid v
-Specifies which VLAN identifier a "port" is associated with. Only valid when
-\fB\-\-vlan\-tagging\fR is speficied.
-
-In the client context, the setting specifies which VLAN ID a client is
-associated with. In the global context, the VLAN ID of the server TAP device is set.
-The latter only makes sense for
-.B \-\-vlan\-accept untagged
-and
-.B \-\-vlan\-accept all
-modes.
-
-Valid values for
-.B v
-go from 1 through to 4094. The global value defaults to 1. If no \-\-vlan\-pvid
-is specified in the client context, the global value is inherited.
-
-In some switch implementations, the PVID is also referred to as "Native VLAN".
-.\"*********************************************************
-.SS Client Mode
-Use client mode when connecting to an OpenVPN server
-which has
-.B \-\-server, \-\-server\-bridge,
-or
-.B \-\-mode server
-in it's configuration.
-.\"*********************************************************
-.TP
-.B \-\-client
-A helper directive designed to simplify the configuration
-of OpenVPN's client mode.  This directive is equivalent to:
-
-.nf
-.ft 3
-.in +4
- pull
- tls\-client
-.in -4
-.ft
-.fi
-.\"*********************************************************
-.TP
-.B \-\-pull
-This option must be used on a client which is connecting
-to a multi\-client server.  It indicates to OpenVPN that it
-should accept options pushed by the server, provided they
-are part of the legal set of pushable options (note that the
-.B \-\-pull
-option is implied by
-.B \-\-client
-).
-
-In particular,
-.B \-\-pull
-allows the server to push routes to the client, so you should
-not use
-.B \-\-pull
-or
-.B \-\-client
-in situations where you don't trust the server to have control
-over the client's routing table.
-.\"*********************************************************
-.TP
-.B \-\-pull\-filter accept|ignore|reject \fItext\fR
-Filter options received from the server if the option starts with
-\fItext\fR.  Runs on client. The action flag
-.B accept
-allows the option,
-.B ignore
-removes it and
-.B reject
-flags an error and triggers a SIGUSR1 restart.
-The filters may be specified multiple times, and each filter is
-applied in the order it is specified. The filtering of each
-option stops as soon as a match is found. Unmatched options are accepted
-by default.
-
-Prefix comparison is used to match \fItext\fR against the
-received option so that
-
-.nf
-.ft 3
-.in +4
-\-\-pull\-filter ignore "route"
-.in -4
-.ft
-.fi
-
-would remove all pushed options starting with
-.B route
-which would include, for example,
-.B route\-gateway.
-Enclose \fItext\fR in quotes to embed spaces.
-
-.nf
-.ft 3
-.in +4
-\-\-pull\-filter accept "route 192.168.1."
-\-\-pull\-filter ignore "route "
-.in -4
-.ft
-.fi
-
-would remove all routes that do not start with 192.168.1.
-
-This option may be used only on clients.
-Note that
-.B reject
-may result in a repeated cycle of failure and reconnect,
-unless multiple remotes are specified and connection to the next remote
-succeeds. To silently ignore an option pushed by the server, use
-.B ignore.
-.\"*********************************************************
-.TP
-.B \-\-auth\-user\-pass [up]
-Authenticate with server using username/password.
-.B up
-is a file containing username/password on 2 lines. If the
-password line is missing, OpenVPN will prompt for one.
-
-If
-.B up
-is omitted, username/password will be prompted from the
-console.
-
-The server configuration must specify an
-.B \-\-auth\-user\-pass\-verify
-script to verify the username/password provided by
-the client.
-.\"*********************************************************
-.TP
-.B \-\-auth\-retry type
-Controls how OpenVPN responds to username/password verification
-errors such as the client\-side response to an AUTH_FAILED message from the server
-or verification failure of the private key password.
-
-Normally used to prevent auth errors from being fatal
-on the client side, and to permit username/password requeries in case
-of error.
-
-An AUTH_FAILED message is generated by the server if the client
-fails
-.B \-\-auth\-user\-pass
-authentication, or if the server\-side
-.B \-\-client\-connect
-script returns an error status when the client
-tries to connect.
-
-.B type
-can be one of:
-
-.B none \-\-
-Client will exit with a fatal error (this is the default).
-.br
-.B nointeract \-\-
-Client will retry the connection without requerying for an
-.B \-\-auth\-user\-pass
-username/password.  Use this option for unattended clients.
-.br
-.B interact \-\-
-Client will requery for an
-.B \-\-auth\-user\-pass
-username/password and/or private key password before attempting a reconnection.
-
-Note that while this option cannot be pushed, it can be controlled
-from the management interface.
-.\"*********************************************************
-.TP
-.B \-\-static\-challenge t e
-Enable static challenge/response protocol using challenge text
-.B t,
-with
-echo flag given by
-.B e
-(0|1).
-
-The echo flag indicates whether or not the user's response
-to the challenge should be echoed.
-
-See management\-notes.txt in the OpenVPN distribution for a
-description of the OpenVPN challenge/response protocol.
-.\"*********************************************************
-.TP
-\fB\-\-server\-poll\-timeout n\fR, \fB\-\-connect\-timeout n\fR
-When connecting to a remote server do not wait for more than
-.B n
-seconds waiting for a response before trying the next server.
-The default value is 120s. This timeout includes proxy and TCP
-connect timeouts.
-.\"*********************************************************
-.TP
-.B \-\-explicit\-exit\-notify [n]
-In UDP client mode or point\-to\-point mode, send server/peer an exit notification
-if tunnel is restarted or OpenVPN process is exited.  In client mode, on
-exit/restart, this
-option will tell the server to immediately close its client instance object
-rather than waiting for a timeout.  The
-.B n
-parameter (default=1) controls the maximum number of attempts that the client
-will try to resend the exit notification message.
-
-In UDP server mode, send RESTART control channel command to connected clients. The
-.B n
-parameter (default=1) controls client behavior. With
-.B n
-= 1 client will attempt to reconnect
-to the same server, with
-.B n
-= 2 client will advance to the next server.
-
-OpenVPN will not send any exit
-notifications unless this option is enabled.
-.TP
-.B \-\-allow\-recursive\-routing
-When this option is set, OpenVPN will not drop incoming tun packets
-with same destination as host.
-.\"*********************************************************
-.SS Data Channel Encryption Options:
-These options are meaningful for both Static & TLS\-negotiated key modes
-(must be compatible between peers).
-.\"*********************************************************
-.TP
-.B \-\-secret file [direction]
-Enable Static Key encryption mode (non\-TLS).
-Use pre\-shared secret
-.B file
-which was generated with
-.B \-\-genkey.
-
-The optional
-.B direction
-parameter enables the use of 4 distinct keys
-(HMAC\-send, cipher\-encrypt, HMAC\-receive, cipher\-decrypt), so that
-each data flow direction has a different set of HMAC and cipher keys.
-This has a number of desirable security properties including
-eliminating certain kinds of DoS and message replay attacks.
-
-When the
-.B direction
-parameter is omitted, 2 keys are used bidirectionally, one for HMAC
-and the other for encryption/decryption.
-
-The
-.B direction
-parameter should always be complementary on either side of the connection,
-i.e. one side should use "0" and the other should use "1", or both sides
-should omit it altogether.
-
-The
-.B direction
-parameter requires that
-.B file
-contains a 2048 bit key.  While pre\-1.5 versions of OpenVPN
-generate 1024 bit key files, any version of OpenVPN which
-supports the
-.B direction
-parameter, will also support 2048 bit key file generation
-using the
-.B \-\-genkey
-option.
-
-Static key encryption mode has certain advantages,
-the primary being ease of configuration.
-
-There are no certificates
-or certificate authorities or complicated negotiation handshakes and protocols.
-The only requirement is that you have a pre\-existing secure channel with
-your peer (such as
-.B ssh
-) to initially copy the key.  This requirement, along with the
-fact that your key never changes unless you manually generate a new one,
-makes it somewhat less secure than TLS mode (see below).  If an attacker
-manages to steal your key, everything that was ever encrypted with
-it is compromised.  Contrast that to the perfect forward secrecy features of
-TLS mode (using Diffie Hellman key exchange), where even if an attacker
-was able to steal your private key, he would gain no information to help
-him decrypt past sessions.
-
-Another advantageous aspect of Static Key encryption mode is that
-it is a handshake\-free protocol
-without any distinguishing signature or feature
-(such as a header or protocol handshake sequence) 
-that would mark the ciphertext packets as being
-generated by OpenVPN.  Anyone eavesdropping on the wire
-would see nothing
-but random\-looking data.
-.\"*********************************************************
-.TP
-.B \-\-key\-direction
-Alternative way of specifying the optional direction parameter for the
-.B \-\-tls\-auth
-and
-.B \-\-secret
-options. Useful when using inline files (See section on inline files).
-.\"*********************************************************
-.TP
-.B \-\-auth alg
-Authenticate data channel packets and (if enabled)
-.B tls\-auth
-control channel packets with HMAC using message digest algorithm
-.B alg.
-(The default is
-.B SHA1
-).
-HMAC is a commonly used message authentication algorithm (MAC) that uses
-a data string, a secure hash algorithm, and a key, to produce
-a digital signature.
-
-The OpenVPN data channel protocol uses encrypt\-then\-mac (i.e. first encrypt a
-packet, then HMAC the resulting ciphertext), which prevents padding oracle
-attacks.
-
-If an AEAD cipher mode (e.g. GCM) is chosen, the specified
-.B \-\-auth
-algorithm is ignored for the data channel, and the authentication method of the
-AEAD cipher is used instead.  Note that
-.B alg
-still specifies the digest used for
-.B tls\-auth\fR.
-
-In static\-key encryption mode, the HMAC key
-is included in the key file generated by
-.B \-\-genkey.
-In TLS mode, the HMAC key is dynamically generated and shared
-between peers via the TLS control channel.  If OpenVPN receives a packet with
-a bad HMAC it will drop the packet.
-HMAC usually adds 16 or 20 bytes per packet.
-Set
-.B alg=none
-to disable authentication.
-
-For more information on HMAC see
-.I http://www.cs.ucsd.edu/users/mihir/papers/hmac.html
-.\"*********************************************************
-.TP
-.B \-\-cipher alg
-Encrypt data channel packets with cipher algorithm
-.B alg.
-
-The default is
-.B BF\-CBC,
-an abbreviation for Blowfish in Cipher Block Chaining mode.  When cipher
-negotiation (NCP) is allowed, OpenVPN 2.4 and newer on both client and server
-side will automatically upgrade to
-.B AES\-256\-GCM.
-See
-.B \-\-ncp\-ciphers
-and
-.B \-\-ncp\-disable
-for more details on NCP.
-
-Using
-.B BF\-CBC
-is no longer recommended, because of its 64\-bit block size.  This
-small block size allows attacks based on collisions, as demonstrated by SWEET32.
-See https://community.openvpn.net/openvpn/wiki/SWEET32 for details.  Due to
-this, support for
-.B BF\-CBC, DES, CAST5, IDEA
-and
-.B RC2
-ciphers will be removed in OpenVPN 2.6.
-
-To see other ciphers that are available with OpenVPN, use the
-.B \-\-show\-ciphers
-option.
-
-Set
-.B alg=none
-to disable encryption.
-
-.\"*********************************************************
-.TP
-.B \-\-ncp\-ciphers cipher_list
-Restrict the allowed ciphers to be negotiated to the ciphers in
-.B cipher_list\fR.
-.B cipher_list
-is a colon\-separated list of ciphers, and defaults to
-"AES\-256\-GCM:AES\-128\-GCM".
-
-For servers, the first cipher from
-.B cipher_list
-that is also supported by the client will be pushed to clients
-that support cipher negotiation.
-
-Cipher negotiation is enabled in client\-server mode only.  I.e. if
-.B \-\-mode
-is set to 'server' (server\-side, implied by setting
-.B \-\-server
-), or if
-.B \-\-pull
-is specified (client\-side, implied by setting \-\-client).
-
-If both peers support and do not disable NCP, the negotiated cipher will
-override the cipher specified by
-.B \-\-cipher\fR.
-
-Additionally, to allow for more smooth transition, if NCP is enabled, OpenVPN
-will inherit the cipher of the peer if that cipher is different from the local
-.B \-\-cipher
-setting, but the peer cipher is one of the ciphers specified in
-.B \-\-ncp\-ciphers\fR.
-E.g. a non\-NCP client (<=v2.3, or with \-\-ncp\-disabled set) connecting to a
-NCP server (v2.4+) with "\-\-cipher BF\-CBC" and "\-\-ncp\-ciphers
-AES\-256\-GCM:AES\-256\-CBC" set can either specify "\-\-cipher BF\-CBC" or
-"\-\-cipher AES\-256\-CBC" and both will work.
-
-Note, for using NCP with a OpenVPN 2.4 peer this list must include
-the AES\-256\-GCM and AES\-128\-GCM ciphers.
-
-This list is restricted to be 127 chars long after conversion to OpenVPN
-ciphers.
-.\"*********************************************************
-.TP
-.B \-\-ncp\-disable
-Disable "negotiable crypto parameters".  This completely disables cipher
-negotiation.
-.\"*********************************************************
-.TP
-.B \-\-keysize n
-.B DEPRECATED
-This option will be removed in OpenVPN 2.6.
-
-Size of cipher key in bits (optional).
-If unspecified, defaults to cipher\-specific default.  The
-.B \-\-show\-ciphers
-option (see below) shows all available OpenSSL ciphers,
-their default key sizes, and whether the key size can
-be changed.  Use care in changing a cipher's default
-key size.  Many ciphers have not been extensively
-cryptanalyzed with non\-standard key lengths, and a
-larger key may offer no real guarantee of greater
-security, or may even reduce security.
-.\"*********************************************************
-.TP
-.B \-\-prng alg [nsl]
-(Advanced) For PRNG (Pseudo\-random number generator),
-use digest algorithm
-.B alg
-(default=sha1), and set
-.B nsl
-(default=16)
-to the size in bytes of the nonce secret length (between 16 and 64).
-
-Set
-.B alg=none
-to disable the PRNG and use the OpenSSL RAND_bytes function
-instead for all of OpenVPN's pseudo\-random number needs.
-.\"*********************************************************
-.TP
-.B \-\-engine [engine\-name]
-Enable OpenSSL hardware\-based crypto engine functionality.
-
-If
-.B engine\-name
-is specified,
-use a specific crypto engine.  Use the
-.B \-\-show\-engines
-standalone option to list the crypto engines which are
-supported by OpenSSL.
-.\"*********************************************************
-.TP
-.B \-\-no\-replay
-.B DEPRECATED
-This option will be removed in OpenVPN 2.5.
-
-(Advanced) Disable OpenVPN's protection against replay attacks.
-Don't use this option unless you are prepared to make
-a tradeoff of greater efficiency in exchange for less
-security.
-
-OpenVPN provides datagram replay protection by default.
-
-Replay protection is accomplished
-by tagging each outgoing datagram with an identifier
-that is guaranteed to be unique for the key being used.
-The peer that receives the datagram will check for
-the uniqueness of the identifier.  If the identifier
-was already received in a previous datagram, OpenVPN
-will drop the packet.  Replay protection is important
-to defeat attacks such as a SYN flood attack, where
-the attacker listens in the wire, intercepts a TCP
-SYN packet (identifying it by the context in which
-it occurs in relation to other packets), then floods
-the receiving peer with copies of this packet.
-
-OpenVPN's replay protection is implemented in slightly
-different ways, depending on the key management mode
-you have selected.
-
-In Static Key mode
-or when using an CFB or OFB mode cipher, OpenVPN uses a
-64 bit unique identifier that combines a time stamp with
-an incrementing sequence number.
-
-When using TLS mode for key exchange and a CBC cipher
-mode, OpenVPN uses only a 32 bit sequence number without
-a time stamp, since OpenVPN can guarantee the uniqueness
-of this value for each key.  As in IPSec, if the sequence number is
-close to wrapping back to zero, OpenVPN will trigger
-a new key exchange.
-
-To check for replays, OpenVPN uses
-the
-.I sliding window
-algorithm used
-by IPSec.
-.\"*********************************************************
-.TP
-.B \-\-replay\-window n [t]
-Use a replay protection sliding\-window of size
-.B n
-and a time window of
-.B t
-seconds.
-
-By default
-.B n
-is 64 (the IPSec default) and
-.B t
-is 15 seconds.
-
-This option is only relevant in UDP mode, i.e.
-when either
-.B \-\-proto udp
-is specified, or no
-.B \-\-proto
-option is specified.
-
-When OpenVPN tunnels IP packets over UDP, there is the possibility that
-packets might be dropped or delivered out of order.  Because OpenVPN, like IPSec,
-is emulating the physical network layer,
-it will accept an out\-of\-order packet sequence, and
-will deliver such packets in the same order they were received to
-the TCP/IP protocol stack, provided they satisfy several constraints.
-
-.B (a)
-The packet cannot be a replay (unless
-.B \-\-no\-replay
-is specified, which disables replay protection altogether).
-
-.B (b)
-If a packet arrives out of order, it will only be accepted if the difference
-between its sequence number and the highest sequence number received
-so far is less than
-.B n.
-
-.B (c)
-If a packet arrives out of order, it will only be accepted if it arrives no later
-than
-.B t
-seconds after any packet containing a higher sequence number.
-
-If you are using a network link with a large pipeline (meaning that
-the product of bandwidth and latency is high), you may want to use
-a larger value for
-.B n.
-Satellite links in particular often require this.
-
-If you run OpenVPN at
-.B \-\-verb 4,
-you will see the message "Replay\-window backtrack occurred [x]"
-every time the maximum sequence number backtrack seen thus far
-increases.  This can be used to calibrate
-.B n.
-
-There is some controversy on the appropriate method of handling packet
-reordering at the security layer.
-
-Namely, to what extent should the
-security layer protect the encapsulated protocol from attacks which masquerade
-as the kinds of normal packet loss and reordering that occur over IP networks?
-
-The IPSec and OpenVPN approach is to allow packet reordering within a certain
-fixed sequence number window.
-
-OpenVPN adds to the IPSec model by limiting the window size in time as well as
-sequence space.
-
-OpenVPN also adds TCP transport as an option (not offered by IPSec) in which
-case OpenVPN can adopt a very strict attitude towards message deletion and
-reordering:  Don't allow it.  Since TCP guarantees reliability, any packet
-loss or reordering event can be assumed to be an attack.
-
-In this sense, it could be argued that TCP tunnel transport is preferred when
-tunneling non\-IP or UDP application protocols which might be vulnerable to a
-message deletion or reordering attack which falls within the normal
-operational parameters of IP networks.
-
-So I would make the statement that one should never tunnel a non\-IP protocol
-or UDP application protocol over UDP, if the protocol might be vulnerable to a
-message deletion or reordering attack that falls within the normal operating
-parameters of what is to be expected from the physical IP layer.  The problem
-is easily fixed by simply using TCP as the VPN transport layer.
-.\"*********************************************************
-.TP
-.B \-\-mute\-replay\-warnings
-Silence the output of replay warnings, which are a common
-false alarm on WiFi networks.  This option preserves
-the security of the replay protection code without
-the verbosity associated with warnings about duplicate
-packets.
-.\"*********************************************************
-.TP
-.B \-\-replay\-persist file
-Persist replay\-protection state across sessions using
-.B file
-to save and reload the state.
-
-This option will strengthen protection against replay attacks,
-especially when you are using OpenVPN in a dynamic context (such
-as with
-.B \-\-inetd)
-when OpenVPN sessions are frequently started and stopped. 
-
-This option will keep a disk copy of the current replay protection
-state (i.e. the most recent packet timestamp and sequence number
-received from the remote peer), so that if an OpenVPN session
-is stopped and restarted, it will reject any replays of packets
-which were already received by the prior session.
-
-This option only makes sense when replay protection is enabled
-(the default) and you are using either
-.B \-\-secret
-(shared\-secret key mode) or TLS mode with
-.B \-\-tls\-auth.
-.\"*********************************************************
-.TP
-.B \-\-no\-iv
-.B DEPRECATED
-This option will be removed in OpenVPN 2.5.
-
-(Advanced) Disable OpenVPN's use of IV (cipher initialization vector).
-Don't use this option unless you are prepared to make
-a tradeoff of greater efficiency in exchange for less
-security.
-
-OpenVPN uses an IV by default, and requires it for CFB and
-OFB cipher modes (which are totally insecure without it).
-Using an IV is important for security when multiple
-messages are being encrypted/decrypted with the same key.
-
-IV is implemented differently depending on the cipher mode used.
-
-In CBC mode, OpenVPN uses a pseudo\-random IV for each packet.
-
-In CFB/OFB mode, OpenVPN uses a unique sequence number and time stamp
-as the IV.  In fact, in CFB/OFB mode, OpenVPN uses a datagram
-space\-saving optimization that uses the unique identifier for
-datagram replay protection as the IV.
-.\"*********************************************************
-.TP
-.B \-\-use\-prediction\-resistance
-Enable prediction resistance on mbed TLS's RNG.
-
-Enabling prediction resistance causes the RNG to reseed in each
-call for random. Reseeding this often can quickly deplete the kernel
-entropy pool.
-
-If you need this option, please consider running a daemon that adds
-entropy to the kernel pool.
-
-.\"*********************************************************
-.TP
-.B \-\-test\-crypto
-Do a self\-test of OpenVPN's crypto options by encrypting and
-decrypting test packets using the data channel encryption options
-specified above.  This option does not require a peer to function,
-and therefore can be specified without
-.B \-\-dev
-or
-.B \-\-remote.
-
-The typical usage of
-.B \-\-test\-crypto
-would be something like this:
-
-.B openvpn \-\-test\-crypto \-\-secret key
-
-or
-
-.B openvpn \-\-test\-crypto \-\-secret key \-\-verb 9
-
-This option is very useful to test OpenVPN after it has been ported to
-a new platform, or to isolate problems in the compiler, OpenSSL
-crypto library, or OpenVPN's crypto code.  Since it is a self\-test mode,
-problems with encryption and authentication can be debugged independently
-of network and tunnel issues.
-.\"*********************************************************
-.SS TLS Mode Options:
-TLS mode is the most powerful crypto mode of OpenVPN in both security and flexibility.
-TLS mode works by establishing control and
-data channels which are multiplexed over a single TCP/UDP port.  OpenVPN initiates
-a TLS session over the control channel and uses it to exchange cipher
-and HMAC keys to protect the data channel.  TLS mode uses a robust reliability
-layer over the UDP connection for all control channel communication, while
-the data channel, over which encrypted tunnel data passes, is forwarded without
-any mediation.  The result is the best of both worlds: a fast data channel
-that forwards over UDP with only the overhead of encrypt,
-decrypt, and HMAC functions,
-and a control channel that provides all of the security features of TLS,
-including certificate\-based authentication and Diffie Hellman forward secrecy.
-
-To use TLS mode, each peer that runs OpenVPN should have its own local
-certificate/key pair (
-.B \-\-cert
-and
-.B \-\-key
-), signed by the root certificate which is specified
-in
-.B \-\-ca.
-
-When two OpenVPN peers connect, each presents its local certificate to the
-other.  Each peer will then check that its partner peer presented a
-certificate which was signed by the master root certificate as specified in
-.B \-\-ca.
-
-If that check on both peers succeeds, then the TLS negotiation
-will succeed, both OpenVPN
-peers will exchange temporary session keys, and the tunnel will begin
-passing data.
-
-The OpenVPN project provides a set of scripts for
-managing RSA certificates & keys:
-.I https://github.com/OpenVPN/easy\-rsa
-.\"*********************************************************
-.TP
-.B \-\-tls\-server
-Enable TLS and assume server role during TLS handshake.  Note that
-OpenVPN is designed as a peer\-to\-peer application.  The designation
-of client or server is only for the purpose of negotiating the TLS
-control channel.
-.\"*********************************************************
-.TP
-.B \-\-tls\-client
-Enable TLS and assume client role during TLS handshake.
-.\"*********************************************************
-.TP
-.B \-\-ca file
-Certificate authority (CA) file in .pem format, also referred to as the
-.I root
-certificate.  This file can have multiple
-certificates in .pem format, concatenated together.  You can construct your own
-certificate authority certificate and private key by using a command such as:
-
-.B openssl req \-nodes \-new \-x509 \-keyout ca.key \-out ca.crt
-
-Then edit your openssl.cnf file and edit the
-.B certificate
-variable to point to your new root certificate
-.B ca.crt.
-
-For testing purposes only, the OpenVPN distribution includes a sample
-CA certificate (ca.crt).
-Of course you should never use
-the test certificates and test keys distributed with OpenVPN in a
-production environment, since by virtue of the fact that
-they are distributed with OpenVPN, they are totally insecure.
-.\"*********************************************************
-.TP
-.B \-\-capath dir
-Directory containing trusted certificates (CAs and CRLs).
-Not available with mbed TLS.
-
-CAs in the capath directory are expected to be named <hash>.<n>. CRLs are
-expected to be named <hash>.r<n>. See the
-.B \-CApath
-option of
-.B openssl verify
-, and the
-.B \-hash
-option of
-.B openssl x509
-,
-.B openssl crl
-and
-.BR X509_LOOKUP_hash_dir (3)
-for more information.
-
-Similarly to the
-.B \-\-crl\-verify
-option CRLs are not mandatory \- OpenVPN will log the usual warning in the logs
-if the relevant CRL is missing, but the connection will be allowed.
-.\"*********************************************************
-.TP
-.B \-\-dh file
-File containing Diffie Hellman parameters
-in .pem format (required for
-.B \-\-tls\-server
-only).
-
-Set
-.B file=none
-to disable Diffie Hellman key exchange (and use ECDH only). Note that this
-requires peers to be using an SSL library that supports ECDH TLS cipher suites
-(e.g. OpenSSL 1.0.1+, or mbed TLS 2.0+).
-
-Use
-.B openssl dhparam \-out dh2048.pem 2048
-to generate 2048\-bit DH parameters. Diffie Hellman parameters may be considered
-public.
-.\"*********************************************************
-.TP
-.B \-\-ecdh\-curve name
-Specify the curve to use for elliptic curve Diffie Hellman. Available
-curves can be listed with
-.BR \-\-show\-curves .
-The specified curve will only be used for ECDH TLS\-ciphers.
-
-This option is not supported in mbed TLS builds of OpenVPN.
-.\"*********************************************************
-.TP
-.B \-\-cert file
-Local peer's signed certificate in .pem format \-\- must be signed
-by a certificate authority whose certificate is in
-.B \-\-ca file.
-Each peer in an OpenVPN link running in TLS mode should have its own
-certificate and private key file.  In addition, each certificate should
-have been signed by the key of a certificate
-authority whose public key resides in the
-.B \-\-ca
-certificate authority file.
-You can easily make your own certificate authority (see above) or pay money
-to use a commercial service such as thawte.com (in which case you will be
-helping to finance the world's second space tourist :).
-To generate a certificate,
-you can use a command such as:
-
-.B openssl req \-nodes \-new \-keyout mycert.key \-out mycert.csr
-
-If your certificate authority private key lives on another machine, copy
-the certificate signing request (mycert.csr) to this other machine (this can
-be done over an insecure channel such as email).  Now sign the certificate
-with a command such as:
-
-.B openssl ca \-out mycert.crt \-in mycert.csr
-
-Now copy the certificate (mycert.crt)
-back to the peer which initially generated the .csr file (this
-can be over a public medium).
-Note that the
-.B openssl ca
-command reads the location of the certificate authority key from its
-configuration file such as
-.B /usr/share/ssl/openssl.cnf
-\-\- note also
-that for certificate authority functions, you must set up the files
-.B index.txt
-(may be empty) and
-.B serial
-(initialize to
-.B 
-01
-).
-.\"*********************************************************
-.TP
-.B \-\-extra\-certs file
-Specify a
-.B file
-containing one or more PEM certs (concatenated together)
-that complete the
-local certificate chain.
-
-This option is useful for "split" CAs, where the CA for server
-certs is different than the CA for client certs.  Putting certs
-in this file allows them to be used to complete the local
-certificate chain without trusting them to verify the peer\-submitted
-certificate, as would be the case if the certs were placed in the
-.B ca
-file.
-.\"*********************************************************
-.TP
-.B \-\-key file
-Local peer's private key in .pem format.  Use the private key which was generated
-when you built your peer's certificate (see
-.B \-\-cert file
-above).
-.\"*********************************************************
-.TP
-.B \-\-tls\-version\-min version ['or\-highest']
-Sets the minimum
-TLS version we will accept from the peer (default is "1.0").
-Examples for version
-include "1.0", "1.1", or "1.2".  If 'or\-highest' is specified
-and version is not recognized, we will only accept the highest TLS
-version supported by the local SSL implementation.
-.\"*********************************************************
-.TP
-.B \-\-tls\-version\-max version
-Set the maximum TLS version we will use (default is the highest version
-supported).  Examples for version include "1.0", "1.1", or "1.2".
-.\"*********************************************************
-.TP
-.B \-\-pkcs12 file
-Specify a PKCS #12 file containing local private key,
-local certificate, and root CA certificate.
-This option can be used instead of
-.B \-\-ca, \-\-cert,
-and
-.B \-\-key.
-Not available with mbed TLS.
-.\"*********************************************************
-.TP
-.B \-\-verify\-hash hash [algo]
-Specify SHA1 or SHA256 fingerprint for level\-1 cert.  The level\-1 cert is the
-CA (or intermediate cert) that signs the leaf certificate, and is
-one removed from the leaf certificate in the direction of the root.
-When accepting a connection from a peer, the level\-1 cert
-fingerprint must match
-.B hash
-or certificate verification will fail.  Hash is specified
-as XX:XX:... For example:
-
-.nf
-.ft 3
-.in +4
-AD:B0:95:D8:09:C8:36:45:12:A9:89:C8:90:09:CB:13:72:A6:AD:16
-.in -4
-.ft
-.fi
-
-The
-.B algo
-flag can be either SHA1 or SHA256.  If not provided, it defaults to SHA1.
-.\"*********************************************************
-.TP
-.B \-\-pkcs11\-cert\-private [0|1]...
-Set if access to certificate object should be performed after login.
-Every provider has its own setting.
-.\"*********************************************************
-.TP
-.B \-\-pkcs11\-id name
-Specify the serialized certificate id to be used. The id can be gotten
-by the standalone
-.B \-\-show\-pkcs11\-ids
-option.
-.\"*********************************************************
-.TP
-.B \-\-pkcs11\-id\-management
-Acquire PKCS#11 id from management interface. In this case a NEED\-STR 'pkcs11\-id\-request'
-real\-time message will be triggered, application may use pkcs11\-id\-count command to
-retrieve available number of certificates, and pkcs11\-id\-get command to retrieve certificate
-id and certificate body.
-.\"*********************************************************
-.TP
-.B \-\-pkcs11\-pin\-cache seconds
-Specify how many seconds the PIN can be cached, the default is until the token is removed.
-.\"*********************************************************
-.TP
-.B \-\-pkcs11\-protected\-authentication [0|1]...
-Use PKCS#11 protected authentication path, useful for biometric and external
-keypad devices.
-Every provider has its own setting.
-.\"*********************************************************
-.TP
-.B \-\-pkcs11\-providers provider...
-Specify a RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki) providers
-to load.
-This option can be used instead of
-.B \-\-cert, \-\-key,
-and
-.B \-\-pkcs12.
-
-If p11\-kit is present on the system, its
-.B p11\-kit\-proxy.so
-module will be loaded by default if either the
-.B \-\-pkcs11\-id
-or
-.B \-\-pkcs11\-id\-management
-options are specified without
-.B \-\-pkcs11\-provider
-being given.
-.\"*********************************************************
-.TP
-.B \-\-pkcs11\-private\-mode mode...
-Specify which method to use in order to perform private key operations.
-A different mode can be specified for each provider.
-Mode is encoded as hex number, and can be a mask one of the following:
-
-.B 0
-(default) \-\- Try to determine automatically.
-.br
-.B 1
-\-\- Use sign.
-.br
-.B 2
-\-\- Use sign recover.
-.br
-.B 4
-\-\- Use decrypt.
-.br
-.B 8
-\-\- Use unwrap.
-.br
-.\"*********************************************************
-.TP
-.B \-\-cryptoapicert select\-string
-Load the certificate and private key from the
-Windows Certificate System Store (Windows/OpenSSL Only).
-
-Use this option instead of
-.B \-\-cert
-and
-.B \-\-key.
-
-This makes
-it possible to use any smart card, supported by Windows, but also any
-kind of certificate, residing in the Cert Store, where you have access to
-the private key.  This option has been tested with a couple of different
-smart cards (GemSAFE, Cryptoflex, and Swedish Post Office eID) on the
-client side, and also an imported PKCS12 software certificate on the
-server side.
-
-To select a certificate, based on a substring search in the
-certificate's subject:
-
-.B cryptoapicert
-"SUBJ:Peter Runestig"
-
-To select a certificate, based on certificate's thumbprint:
-
-.B cryptoapicert
-"THUMB:f6 49 24 41 01 b4 ..."
-
-The thumbprint hex string can easily be copy\-and\-pasted from the Windows
-Certificate Store GUI.
-
-.\"*********************************************************
-.TP
-.B \-\-key\-method m
-.B DEPRECATED
-This option will be removed in OpenVPN 2.5
-
-Use data channel key negotiation method
-.B m.
-The key method must match on both sides of the connection.
-
-After OpenVPN negotiates a TLS session, a new set of keys
-for protecting the tunnel data channel is generated and
-exchanged over the TLS session.
-
-In method 1 (the default for OpenVPN 1.x), both sides generate
-random encrypt and HMAC\-send keys which are forwarded to
-the other host over the TLS channel. Method 1 is
-.B deprecated in OpenVPN 2.4
-, and
-.B will be removed in OpenVPN 2.5\fR.
-
-In method 2, (the default for OpenVPN 2.0)
-the client generates a random key.  Both client
-and server also generate some random seed material.  All key source
-material is exchanged over the TLS channel. The actual
-keys are generated using the TLS PRF function, taking source
-entropy from both client and server.  Method 2 is designed to
-closely parallel the key generation process used by TLS 1.0.
-
-Note that in TLS mode, two separate levels 
-of keying occur:
-
-(1) The TLS connection is initially negotiated, with both sides
-of the connection producing certificates and verifying the certificate
-(or other authentication info provided) of
-the other side.  The
-.B \-\-key\-method
-parameter has no effect on this process.
-
-(2) After the TLS connection is established, the tunnel session keys are
-separately negotiated over the existing secure TLS channel.  Here,
-.B \-\-key\-method
-determines the derivation of the tunnel session keys.
-.\"*********************************************************
-.TP
-.B \-\-tls\-cipher l
-.TQ
-.B \-\-tls\-ciphersuites l
-A list
-.B l
-of allowable TLS ciphers delimited by a colon (":").
-
-These setting can be used to ensure that certain cipher suites are used (or
-not used) for the TLS connection.  OpenVPN uses TLS to secure the control
-channel, over which the keys that are used to protect the actual VPN traffic
-are exchanged.
-
-The supplied list of ciphers is (after potential OpenSSL/IANA name translation)
-simply supplied to the crypto library.  Please see the OpenSSL and/or mbed TLS
-documentation for details on the cipher list interpretation.
-
-For OpenSSL, the
-.B \-\-tls-cipher
-is used for TLS 1.2 and below. For TLS 1.3 and up, the
-.B \-\-tls\-ciphersuites
-setting is used. mbed TLS has no TLS 1.3 support yet and only the
-.B \-\-tls-cipher
-setting is used.
-
-Use
-.B \-\-show\-tls
-to see a list of TLS ciphers supported by your crypto library.
-
-Warning!
-.B \-\-tls\-cipher
-and
-.B \-\-tls\-ciphersuites
-are expert features, which \- if used correctly \- can improve the security of
-your VPN connection.  But it is also easy to unwittingly use them to carefully
-align a gun with your foot, or just break your connection.  Use with care!
-
-The default for \-\-tls\-cipher is to use mbed TLS's default cipher list
-when using mbed TLS or
-"DEFAULT:!EXP:!LOW:!MEDIUM:!kDH:!kECDH:!DSS:!PSK:!SRP:!kRSA" when using
-OpenSSL.
-
-The default for \-\-tls\-ciphersuites is to use the crypto library's default.
-.\"*********************************************************
-.TP
-.B \-\-tls\-cert\-profile profile
-Set the allowed cryptographic algorithms for certificates according to
-.B profile\fN.
-
-The following profiles are supported:
-
-.B legacy
-(default): SHA1 and newer, RSA 2048-bit+, any elliptic curve.
-
-.B preferred
-: SHA2 and newer, RSA 2048-bit+, any elliptic curve.
-
-.B suiteb
-: SHA256/SHA384, ECDSA with P-256 or P-384.
-
-This option is only fully supported for mbed TLS builds.  OpenSSL builds use
-the following approximation:
-
-.B legacy
-(default): sets "security level 1"
-
-.B preferred
-: sets "security level 2"
-
-.B suiteb
-: sets "security level 3" and \-\-tls\-cipher "SUITEB128".
-
-OpenVPN will migrate to 'preferred' as default in the future.  Please ensure
-that your keys already comply.
-.\"*********************************************************
-.TP
-.B \-\-tls\-timeout n
-Packet retransmit timeout on TLS control channel
-if no acknowledgment from remote within
-.B n
-seconds (default=2).  When OpenVPN sends a control
-packet to its peer, it will expect to receive an
-acknowledgement within
-.B n
-seconds or it will retransmit the packet, subject
-to a TCP\-like exponential backoff algorithm.  This parameter
-only applies to control channel packets.  Data channel
-packets (which carry encrypted tunnel data) are never
-acknowledged, sequenced, or retransmitted by OpenVPN because
-the higher level network protocols running on top of the tunnel
-such as TCP expect this role to be left to them.
-.\"*********************************************************
-.TP
-.B \-\-reneg\-bytes n
-Renegotiate data channel key after
-.B n
-bytes sent or received (disabled by default with an exception, see below).
-OpenVPN allows the lifetime of a key
-to be expressed as a number of bytes encrypted/decrypted, a number of packets,
-or a number of seconds.  A key renegotiation will be forced
-if any of these three criteria are met by either peer.
-
-If using ciphers with cipher block sizes less than 128\-bits, \-\-reneg\-bytes is
-set to 64MB by default, unless it is explicitly disabled by setting the value to
-0, but this is
-.B HIGHLY DISCOURAGED
-as this is designed to add some protection against the SWEET32 attack vector.
-For more information see the \-\-cipher option.
-.\"*********************************************************
-.TP
-.B \-\-reneg\-pkts n
-Renegotiate data channel key after
-.B n
-packets sent and received (disabled by default).
-.\"*********************************************************
-.TP
-.B \-\-reneg\-sec max [min]
-Renegotiate data channel key after at most
-.B max
-seconds (default=3600) and at least
-.B min
-seconds (default is 90% of
-.B max
-for servers, and equal to
-.B max
-for clients).
-
-The effective
-.B reneg\-sec
-value used is per session pseudo-uniform-randomized between
-.B min
-and
-.B max\fR.
-
-With the default value of 3600 this results in an effective per session value
-in the range of 3240..3600 seconds for servers, or just 3600 for clients.
-
-When using dual\-factor authentication, note that this default value may
-cause the end user to be challenged to reauthorize once per hour.
-
-Also, keep in mind that this option can be used on both the client and server,
-and whichever uses the lower value will be the one to trigger the renegotiation.
-A common mistake is to set
-.B \-\-reneg\-sec
-to a higher value on either the client or server, while the other side of the connection
-is still using the default value of 3600 seconds, meaning that the renegotiation will
-still occur once per 3600 seconds.  The solution is to increase \-\-reneg\-sec on both the
-client and server, or set it to 0 on one side of the connection (to disable), and to
-your chosen value on the other side.
-.\"*********************************************************
-.TP
-.B \-\-hand\-window n
-Handshake Window \-\- the TLS\-based key exchange must finalize within
-.B n
-seconds
-of handshake initiation by any peer (default = 60 seconds).
-If the handshake fails
-we will attempt to reset our connection with our peer and try again.
-Even in the event of handshake failure we will still use
-our expiring key for up to
-.B \-\-tran\-window
-seconds to maintain continuity of transmission of tunnel
-data.
-.\"*********************************************************
-.TP
-.B \-\-tran\-window n
-Transition window \-\- our old key can live this many seconds
-after a new a key renegotiation begins (default = 3600 seconds).
-This feature allows for a graceful transition from old to new
-key, and removes the key renegotiation sequence from the critical
-path of tunnel data forwarding.
-.\"*********************************************************
-.TP
-.B \-\-single\-session
-After initially connecting to a remote peer, disallow any new connections.
-Using this
-option means that a remote peer cannot connect, disconnect, and then
-reconnect.
-
-If the daemon is reset by a signal or
-.B \-\-ping\-restart,
-it will allow one new connection.
-
-.B \-\-single\-session
-can be used with
-.B \-\-ping\-exit
-or
-.B \-\-inactive
-to create a single dynamic session that will exit when finished.
-.\"*********************************************************
-.TP
-.B \-\-tls\-exit
-Exit on TLS negotiation failure.
-.\"*********************************************************
-.TP
-.B \-\-tls\-auth file [direction]
-Add an additional layer of HMAC authentication on top of the TLS control channel
-to mitigate DoS attacks and attacks on the TLS stack.
-
-In a nutshell,
-.B \-\-tls\-auth
-enables a kind of "HMAC firewall" on OpenVPN's TCP/UDP port,
-where TLS control channel packets
-bearing an incorrect HMAC signature can be dropped immediately without
-response.
-
-.B file
-(required) is a file in OpenVPN static key format which can be generated by
-.B \-\-genkey
-
-Older versions (up to OpenVPN 2.3) supported a freeform passphrase file.
-This is no longer supported in newer versions (v2.4+).
-
-See the
-.B \-\-secret
-option for more information on the optional
-.B direction
-parameter.
-
-.B \-\-tls\-auth
-is recommended when you are running OpenVPN in a mode where
-it is listening for packets from any IP address, such as when
-.B \-\-remote
-is not specified, or
-.B \-\-remote
-is specified with
-.B \-\-float.
-
-The rationale for
-this feature is as follows.  TLS requires a multi\-packet exchange
-before it is able to authenticate a peer.  During this time
-before authentication, OpenVPN is allocating resources (memory
-and CPU) to this potential peer.  The potential peer is also
-exposing many parts of OpenVPN and the OpenSSL library to the packets
-it is sending.  Most successful network attacks today seek
-to either exploit bugs in programs (such as buffer overflow attacks) or
-force a program to consume so many resources that it becomes unusable.
-Of course the first line of defense is always to produce clean,
-well\-audited code.  OpenVPN has been written with buffer overflow
-attack prevention as a top priority.
-But as history has shown, many of the most widely used
-network applications have, from time to time,
-fallen to buffer overflow attacks.
-
-So as a second line of defense, OpenVPN offers
-this special layer of authentication on top of the TLS control channel so that
-every packet on the control channel is authenticated by an
-HMAC signature and a unique ID for replay protection.
-This signature will also help protect against DoS (Denial of Service) attacks.
-An important rule of thumb in reducing vulnerability to DoS attacks is to
-minimize the amount of resources a potential, but as yet unauthenticated,
-client is able to consume.
-
-.B \-\-tls\-auth
-does this by signing every TLS control channel packet with an HMAC signature,
-including packets which are sent before the TLS level has had a chance
-to authenticate the peer.
-The result is that packets without
-the correct signature can be dropped immediately upon reception,
-before they have a chance to consume additional system resources
-such as by initiating a TLS handshake.
-.B \-\-tls\-auth
-can be strengthened by adding the
-.B \-\-replay\-persist
-option which will keep OpenVPN's replay protection state
-in a file so that it is not lost across restarts.
-
-It should be emphasized that this feature is optional and that the
-key file used with
-.B \-\-tls\-auth
-gives a peer nothing more than the power to initiate a TLS
-handshake.  It is not used to encrypt or authenticate any tunnel data.
-
-Use
-.B \-\-tls\-crypt
-instead if you want to use the key file to not only authenticate, but also
-encrypt the TLS control channel.
-.\"*********************************************************
-.TP
-.B \-\-tls\-crypt keyfile
-
-Encrypt and authenticate all control channel packets with the key from
-.B keyfile.
-(See
-.B \-\-tls\-auth
-for more background.)
-
-Encrypting (and authenticating) control channel packets:
-.RS
-.IP \[bu] 2
-provides more privacy by hiding the certificate used for the TLS connection,
-.IP \[bu]
-makes it harder to identify OpenVPN traffic as such,
-.IP \[bu]
-provides "poor\-man's" post\-quantum security, against attackers who will never
-know the pre\-shared key (i.e. no forward secrecy).
-.RE
-
-.IP
-In contrast to
-.B \-\-tls\-auth\fR,
-.B \-\-tls\-crypt
-does *not* require the user to set
-.B \-\-key\-direction\fR.
-
-.B Security Considerations
-
-All peers use the same
-.B \-\-tls\-crypt
-pre\-shared group key to authenticate and encrypt control channel messages.  To
-ensure that IV collisions remain unlikely, this key should not be used to
-encrypt more than 2^48 client\-to\-server or 2^48 server\-to\-client control
-channel messages.  A typical initial negotiation is about 10 packets in each
-direction.  Assuming both initial negotiation and renegotiations are at most
-2^16 (65536) packets (to be conservative), and (re)negotiations happen each
-minute for each user (24/7), this limits the tls\-crypt key lifetime to 8171
-years divided by the number of users.  So a setup with 1000 users should rotate
-the key at least once each eight years.  (And a setup with 8000 users each
-year.)
-
-If IV collisions were to occur, this could result in the security of
-.B \-\-tls\-crypt
-degrading to the same security as using
-.B \-\-tls\-auth\fR.
-That is, the control channel still benefits from the extra protection against
-active man\-in\-the\-middle\-attacks and DoS attacks, but may no longer offer
-extra privacy and post\-quantum security on top of what TLS itself offers.
-
-For large setups or setups where clients are not trusted, consider using
-.B \-\-tls\-crypt\-v2
-instead.  That uses per\-client unique keys, and thereby improves the bounds to
-\fR'rotate a client key at least once per 8000 years'.
-.\"*********************************************************
-.TP
-.B \-\-tls\-crypt\-v2 keyfile
-
-Use client\-specific tls\-crypt keys.
-
-For clients,
-.B keyfile
-is a client\-specific tls\-crypt key.  Such a key can be generated using the
-.B \-\-genkey tls\-crypt\-v2\-client
-option.
-
-For servers,
-.B keyfile
-is used to unwrap client\-specific keys supplied by the client during connection
-setup.  This key must be the same as the key used to generate the
-client\-specific key (see
-.B \-\-genkey tls\-crypt\-v2\-client\fR).
-
-On servers, this option can be used together with the
-.B \-\-tls\-auth
-or
-.B \-\-tls\-crypt
-option.  In that case, the server will detect whether the client is using
-client\-specific keys, and automatically select the right mode.
-.\"*********************************************************
-.TP
-.B \-\-tls\-crypt\-v2\-verify cmd
-
-Run command
-.B cmd
-to verify the metadata of the client\-specific tls\-crypt\-v2 key of a
-connecting client.  This allows server administrators to reject client
-connections, before exposing the TLS stack (including the notoriously dangerous
-X.509 and ASN.1 stacks) to the connecting client.
-
-OpenVPN supplies the following env vars to the command:
-.RS
-.IP \[bu] 2
-script_type is set to "tls\-crypt\-v2\-verify"
-.IP \[bu]
-metadata_type is set to "0" if the metadata was user supplied, or "1" if it's a
-64\-bit unix timestamp representing the key creation time.
-.IP \[bu]
-metadata_file contains the filename of a temporary file that contains the client
-metadata.
-.RE
-
-.IP
-The command can reject the connection by exiting with a non-zero exit code.
-.\"*********************************************************
-.TP
-.B \-\-askpass [file]
-Get certificate password from console or
-.B file
-before we daemonize.
-
-For the extremely
-security conscious, it is possible to protect your private key with
-a password.  Of course this means that every time the OpenVPN
-daemon is started you must be there to type the password.  The
-.B \-\-askpass
-option allows you to start OpenVPN from the command line.  It will
-query you for a password before it daemonizes.  To protect a private
-key with a password you should omit the
-.B \-nodes
-option when you use the
-.B openssl
-command line tool to manage certificates and private keys.
-
-If
-.B file
-is specified, read the password from the first line of
-.B file.
-Keep in mind that storing your password in a file
-to a certain extent invalidates the extra security provided by
-using an encrypted key.
-.\"*********************************************************
-.TP
-.B \-\-auth\-nocache
-Don't cache
-.B \-\-askpass
-or
-.B \-\-auth\-user\-pass
-username/passwords in virtual memory.
-
-If specified, this directive will cause OpenVPN to immediately
-forget username/password inputs after they are used.  As a result,
-when OpenVPN needs a username/password, it will prompt for input
-from stdin, which may be multiple times during the duration of an
-OpenVPN session.
-
-When using \-\-auth\-nocache in combination with a user/password file
-and \-\-chroot or \-\-daemon, make sure to use an absolute path.
-
-This directive does not affect the
-.B \-\-http\-proxy
-username/password.  It is always cached.
-.\"*********************************************************
-.TP
-.B \-\-auth\-token token
-This is not an option to be used directly in any configuration files,
-but rather push this option from a
-.B \-\-client\-connect
-script or a
-.B \-\-plugin
-which hooks into the OPENVPN_PLUGIN_CLIENT_CONNECT or
-OPENVPN_PLUGIN_CLIENT_CONNECT_V2 calls.  This option provides
-a possibility to replace the clients password with an authentication
-token during the lifetime of the OpenVPN client.
-
-Whenever the connection is renegotiated and the
-.B \-\-auth\-user\-pass\-verify
-script or
-.B \-\-plugin
-making use of the OPENVPN_PLUGIN_AUTH_USER_PASS_VERIFY hook is
-triggered, it will pass over this token as the password
-instead of the password the user provided.  The authentication
-token can only be reset by a full reconnect where the server
-can push new options to the client.  The password the user entered
-is never preserved once an authentication token have been set.  If
-the OpenVPN server side rejects the authentication token, the
-client will receive an AUTH_FAIL and disconnect.
-
-The purpose of this is to enable two factor authentication
-methods, such as HOTP or TOTP, to be used without needing to
-retrieve a new OTP code each time the connection is renegotiated.
-Another use case is to cache authentication data on the client
-without needing to have the users password cached in memory
-during the life time of the session.
-
-To make use of this feature, the
-.B \-\-client\-connect
-script or
-.B \-\-plugin
-needs to put
-
-.nf
-.ft 3
-.in +4
-push "auth\-token UNIQUE_TOKEN_VALUE"
-.in -4
-.ft
-.fi
-
-into the file/buffer for dynamic configuration data.  This
-will then make the OpenVPN server to push this value to the
-client, which replaces the local password with the
-UNIQUE_TOKEN_VALUE.
-
-Newer clients (2.4.7+) will fall back to the original password method
-after a failed auth. Older clients will keep using the token value
-and react according to
-.B \-\-auth-retry
-.
-.\"*********************************************************
-.TP
-.B \-\-tls\-verify cmd
-Run command
-.B cmd
-to verify the X509 name of a
-pending TLS connection that has otherwise passed all other
-tests of certification (except for revocation via
-.B \-\-crl\-verify
-directive; the revocation test occurs after the
-.B \-\-tls\-verify
-test).
-
-.B cmd
-should return 0 to allow the TLS handshake to proceed, or 1 to fail.
-
-.B cmd
-consists of a path to script (or executable program), optionally
-followed by arguments. The path and arguments may be single\- or double\-quoted
-and/or escaped using a backslash, and should be separated by one or more spaces.
-
-When
-.B cmd
-is executed two arguments are appended after any arguments specified in
-.B cmd
-, as follows:
-
-.B cmd certificate_depth subject
-
-These arguments are, respectively, the current certificate depth and
-the X509 subject distinguished name (dn) of the peer.
-
-This feature is useful if the peer you want to trust has a certificate
-which was signed by a certificate authority who also signed many
-other certificates, where you don't necessarily want to trust all of them,
-but rather be selective about which
-peer certificate you will accept.  This feature allows you to write a script
-which will test the X509 name on a certificate and decide whether or
-not it should be accepted.  For a simple perl script which will test
-the common name field on the certificate, see the file
-.B verify\-cn
-in the OpenVPN distribution.
-
-See the "Environmental Variables" section below for
-additional parameters passed as environmental variables.
-.\"*********************************************************
-.TP
-.B \-\-tls\-export\-cert directory
-Store the certificates the clients uses upon connection to this
-directory. This will be done before \-\-tls\-verify is called.  The
-certificates will use a temporary name and will be deleted when
-the tls\-verify script returns.  The file name used for the certificate
-is available via the peer_cert environment variable.
-.\"*********************************************************
-.TP
-.B \-\-x509\-username\-field [ext:\]fieldname
-Field in the X.509 certificate subject to be used as the username (default=CN).
-Typically, this option is specified with
-.B fieldname
-as either of the following:
-
-.B \-\-x509\-username\-field
-emailAddress
-.br
-.B \-\-x509\-username\-field ext:\fRsubjectAltName
-
-The first example uses the value of the "emailAddress" attribute in the
-certificate's Subject field as the username.  The second example uses
-the
-.B ext:
-prefix to signify that the X.509 extension
-.B fieldname
-"subjectAltName" be searched for an rfc822Name (email) field to be used
-as the username.  In cases where there are multiple email addresses
-in
-.B ext:fieldname\fR,
-the last occurrence is chosen.
-
-When this option is used, the
-.B \-\-verify\-x509\-name
-option will match against the chosen
-.B fieldname
-instead of the Common Name.
-
-Only the subjectAltName and issuerAltName X.509 extensions are supported.
-
-.B Please note:
-This option has a feature which will convert an all\-lowercase
-.B fieldname
-to uppercase characters, e.g., ou \-> OU.  A mixed\-case
-.B fieldname
-or one having the
-.B ext:
-prefix will be left as\-is.  This automatic upcasing feature
-is deprecated and will be removed in a future release.
-.\"*********************************************************
-.TP
-.B \-\-verify\-x509\-name name type
-Accept connections only if a host's X.509 name is equal to
-.B name.
-The remote host must also pass all other tests of verification.
-
-Which X.509 name is compared to
-.B name
-depends on the setting of type.
-.B type
-can be "subject" to match the complete subject DN (default),
-"name" to match a subject RDN or "name\-prefix" to match a subject RDN prefix.
-Which RDN is verified as name depends on the
-.B \-\-x509\-username\-field
-option. But it defaults to the common name (CN), e.g. a certificate with a
-subject DN "C=KG, ST=NA, L=Bishkek, CN=Server\-1" would be matched by:
-
-.B \-\-verify\-x509\-name 'C=KG, ST=NA, L=Bishkek, CN=Server\-1'
-and
-.B \-\-verify\-x509\-name Server\-1 name
-or you could use
-.B \-\-verify\-x509\-name Server\- name\-prefix
-if you want a client to only accept connections to "Server\-1", "Server\-2", etc.
-
-.B \-\-verify\-x509\-name
-is a useful replacement for the
-.B \-\-tls\-verify
-option to verify the remote host, because
-.B \-\-verify\-x509\-name
-works in a
-.B \-\-chroot
-environment without any dependencies.
-
-Using a name prefix is a useful alternative to managing
-a CRL (Certificate Revocation List) on the client, since it allows the client
-to refuse all certificates except for those associated
-with designated servers.
-
-.B NOTE:
-Test against a name prefix only when you are using OpenVPN with
-a custom CA certificate that is under your control.
-Never use this option with type "name\-prefix" when your client certificates
-are signed by a third party, such as a commercial web CA.
-.\"*********************************************************
-.TP
-.B \-\-x509\-track attribute
-Save peer X509
-.B attribute
-value in environment for use by plugins and management interface.
-Prepend a '+' to
-.B attribute
-to save values from full cert chain.  Values will be encoded
-as X509_<depth>_<attribute>=<value>.  Multiple
-.B \-\-x509\-track
-options can be defined to track multiple attributes.
-.\"*********************************************************
-.TP
-.B \-\-ns\-cert\-type client|server
-.B DEPRECATED
-This option will be removed in OpenVPN 2.5.  Use the more modern equivalent
-.B \-\-remote\-cert\-tls
-instead.  This option will be removed in OpenVPN 2.5.
-
-Require that peer certificate was signed with an explicit
-.B nsCertType
-designation of "client" or "server".
-
-This is a useful security option for clients, to ensure that
-the host they connect with is a designated server.
-
-See the easy\-rsa/build\-key\-server script for an example
-of how to generate a certificate with the
-.B nsCertType
-field set to "server".
-
-If the server certificate's nsCertType field is set
-to "server", then the clients can verify this with
-.B \-\-ns\-cert\-type server.
-
-This is an important security precaution to protect against
-a man\-in\-the\-middle attack where an authorized client
-attempts to connect to another client by impersonating the server.
-The attack is easily prevented by having clients verify
-the server certificate using any one of
-.B \-\-ns\-cert\-type, \-\-verify\-x509\-name,
-or
-.B \-\-tls\-verify.
-.\"*********************************************************
-.TP
-.B \-\-remote\-cert\-ku [v...]
-Require that peer certificate was signed with an explicit
-.B key usage.
-
-If present in the certificate, the keyUsage value is validated by the TLS
-library during the TLS handshake.  Specifying this option without arguments
-requires this extension to be present (so the TLS library will verify it).
-
-If the list
-.B v...
-is also supplied, the keyUsage field must have
-.B at least
-the same bits set as the bits in
-.B one of
-the values supplied in the list
-.B v...
-
-The key usage values in the list must be encoded in hex, e.g.
-"\-\-remote\-cert\-ku a0"
-.\"*********************************************************
-.TP
-.B \-\-remote\-cert\-eku oid
-Require that peer certificate was signed with an explicit
-.B extended key usage.
-
-This is a useful security option for clients, to ensure that
-the host they connect to is a designated server.
-
-The extended key usage should be encoded in oid notation, or
-OpenSSL symbolic representation.
-.\"*********************************************************
-.TP
-.B \-\-remote\-cert\-tls client|server
-Require that peer certificate was signed with an explicit
-.B key usage
-and
-.B extended key usage
-based on RFC3280 TLS rules.
-
-This is a useful security option for clients, to ensure that the host they
-connect to is a designated server.  Or the other way around; for a server to
-verify that only hosts with a client certificate can connect.
-
-The
-.B \-\-remote\-cert\-tls client
-option is equivalent to
-.B
-\-\-remote\-cert\-ku \-\-remote\-cert\-eku "TLS Web Client Authentication"
-
-The
-.B \-\-remote\-cert\-tls server
-option is equivalent to
-.B
-\-\-remote\-cert\-ku \-\-remote\-cert\-eku "TLS Web Server Authentication"
-
-This is an important security precaution to protect against
-a man\-in\-the\-middle attack where an authorized client
-attempts to connect to another client by impersonating the server.
-The attack is easily prevented by having clients verify
-the server certificate using any one of
-.B \-\-remote\-cert\-tls, \-\-verify\-x509\-name,
-or
-.B \-\-tls\-verify.
-.\"*********************************************************
-.TP
-.B \-\-crl\-verify crl ['dir']
-Check peer certificate against the file
-.B crl
-in PEM format.
-
-A CRL (certificate revocation list) is used when a particular key is
-compromised but when the overall PKI is still intact.
-
-Suppose you had a PKI consisting of a CA, root certificate, and a number of
-client certificates.  Suppose a laptop computer containing a client key and
-certificate was stolen.  By adding the stolen certificate to the CRL file,
-you could reject any connection which attempts to use it, while preserving the
-overall integrity of the PKI.
-
-The only time when it would be necessary to rebuild the entire PKI from scratch would be
-if the root certificate key itself was compromised.
-
-The option is not mandatory \- if the relevant CRL is missing, OpenVPN will log
-a warning in the logs \- e.g. "\fIVERIFY WARNING: depth=0, unable to get
-certificate CRL\fR" \- but the connection will be allowed.
-
-If the optional
-.B dir
-flag is specified, enable a different mode where
-.B crl
-is a directory containing files named as revoked serial numbers
-(the files may be empty, the contents are never read).  If a client
-requests a connection, where the client certificate serial number
-(decimal string) is the name of a file present in the directory,
-it will be rejected.
-
-Note: As the crl file (or directory) is read every time a peer connects,
-if you are dropping root privileges with
-.B \-\-user,
-make sure that this user has sufficient privileges to read the file.
-.\"*********************************************************
-.SS SSL Library information:
-.\"*********************************************************
-.TP
-.B \-\-show\-ciphers
-(Standalone)
-Show all cipher algorithms to use with the
-.B \-\-cipher
-option.
-.\"*********************************************************
-.TP
-.B \-\-show\-digests
-(Standalone)
-Show all message digest algorithms to use with the
-.B \-\-auth
-option.
-.\"*********************************************************
-.TP
-.B \-\-show\-tls
-(Standalone)
-Show all TLS ciphers supported by the crypto library.  OpenVPN uses TLS to
-secure the control channel, over which the keys that are used to protect the
-actual VPN traffic are exchanged.  The TLS ciphers will be sorted from highest
-preference (most secure) to lowest.
-
-Be aware that whether a cipher suite in this list can actually work depends on
-the specific setup of both peers (e.g. both peers must support the cipher, and
-an ECDSA cipher suite will not work if you are using an RSA certificate, etc.).
-.\"*********************************************************
-.TP
-.B \-\-show\-engines
-(Standalone)
-Show currently available hardware\-based crypto acceleration
-engines supported by the OpenSSL library.
-.\"*********************************************************
-.TP
-.B \-\-show\-curves
-(Standalone)
-Show all available elliptic curves to use with the
-.B \-\-ecdh\-curve
-option.
-.\"*********************************************************
-.SS Generating key material:
-.\"*********************************************************
-.TP
-.B \-\-genkey keytype keyfile
-(Standalone)
-Generate a key to be used of the type keytype. if keyfile is left out or empty
-the key will be output on stdout. See the following sections for the different keytypes.
-
-.\"*********************************************************
-.TP
-.B \-\-genkey secret|tls\-crypt|tls\-auth keyfile
-Generate a shared secret, for use with the
-.B \-\-secret
-,
-.B \-\-tls\-auth
-or
-.B \-\-tls\-crypt
-options.  Stores the key in
-.B file\fR.
-All three variants (secret, tls-crypt, and tls-auth) generate the same type of
-key. The aliases are added for convenience.
-
-If using this for
-.B \-\-secret
-, this file must be shared with the peer over a pre\-existing secure channel
-such as
-.BR scp (1)\fR.
-.\"*********************************************************
-.TP
-.B \-\-genkey tls\-crypt\-v2\-server keyfile
-
-Generate a \-\-tls\-crypt\-v2 server key and store the key in
-.B keyfile\fR.
-
-.TP
-.B \-\-genkey tls\-crypt\-v2\-client keyfile [metadata]
-
-Generate a \-\-tls\-crypt\-v2 client key, and store the key in
-.B keyfile\fR.
-
-If supplied, include the supplied
-.B metadata
-in the wrapped client key.  This metadata must be supplied in base64\-encoded
-form.  The metadata must be at most 735 bytes long (980 bytes in base64).
-
-If no metadata is supplied, OpenVPN will use a 64\-bit unix timestamp
-representing the current time in UTC, encoded in network order, as metadata for
-the generated key.
-
-A tls\-crypt\-v2 client key is wrapped using a server key.  To generate a
-client key, the user must therefore supply the server key using the
-.B \-\-tls\-crypt\-v2
-option.
-
-Servers can use
-.B \-\-tls\-crypt\-v2\-verify
-to specify a metadata verification command.
-.\"*********************************************************
-.TP
-.B \-\-genkey auth\-token [keyfile]
-Generate a new secret that can be used
-with
-.B \-\-auth\-gen\-token\-secret
-
-.B Note:
-this file should be kept secret to the server as anyone
-that access to this file will be to generate auth tokens
-that the OpenVPN server will accept as valid.
-.\"*********************************************************
-.SS TUN/TAP persistent tunnel config mode:
-Available with Linux 2.4.7+.  These options comprise a standalone mode
-of OpenVPN which can be used to create and delete persistent tunnels.
-.\"*********************************************************
-.TP
-.B \-\-mktun
-(Standalone)
-Create a persistent tunnel on platforms which support them such
-as Linux.  Normally TUN/TAP tunnels exist only for
-the period of time that an application has them open.  This option
-takes advantage of the TUN/TAP driver's ability to build persistent
-tunnels that live through multiple instantiations of OpenVPN and die
-only when they are deleted or the machine is rebooted.
-
-One of the advantages of persistent tunnels is that they eliminate the
-need for separate
-.B \-\-up
-and
-.B \-\-down
-scripts to run the appropriate
-.BR ifconfig (8)
-and
-.BR route (8)
-commands.  These commands can be placed in the the same shell script
-which starts or terminates an OpenVPN session.
-
-Another advantage is that open connections through the TUN/TAP\-based tunnel
-will not be reset if the OpenVPN peer restarts.  This can be useful to
-provide uninterrupted connectivity through the tunnel in the event of a DHCP
-reset of the peer's public IP address (see the
-.B \-\-ipchange
-option above).
-
-One disadvantage of persistent tunnels is that it is harder to automatically
-configure their MTU value (see
-.B \-\-link\-mtu
-and
-.B \-\-tun\-mtu
-above).
-
-On some platforms such as Windows, TAP\-Win32 tunnels are persistent by
-default.
-.\"*********************************************************
-.TP
-.B \-\-rmtun
-(Standalone)
-Remove a persistent tunnel.
-.\"*********************************************************
-.TP
-.B \-\-dev tunX | tapX
-TUN/TAP device
-.\"*********************************************************
-.TP
-.B \-\-user user
-Optional user to be owner of this tunnel.
-.\"*********************************************************
-.TP
-.B \-\-group group
-Optional group to be owner of this tunnel.
-.\"*********************************************************
-.SS Windows\-Specific Options:
-.\"*********************************************************
-.TP
-.B \-\-win\-sys path
-Set the Windows system directory pathname to use when looking for system
-executables such as
-.B route.exe
-and
-.B netsh.exe.
-By default, if this directive is
-not specified, OpenVPN will use the SystemRoot environment variable.
-
-This option have changed behaviour in OpenVPN 2.3.  Earlier you had to
-define
-.B \-\-win\-sys env
-to use the SystemRoot environment variable, otherwise it defaulted to C:\\WINDOWS.
-It is not needed to use the
-.B env
-keyword any more, and it will just be ignored. A warning is logged when this
-is found in the configuration file.
-.\"*********************************************************
-.TP
-.B \-\-ip\-win32 method
-When using
-.B \-\-ifconfig
-on Windows, set the TAP\-Win32 adapter
-IP address and netmask using
-.B method.
-Don't use this option unless you are also using
-.B \-\-ifconfig.
-
-.B manual \-\-
-Don't set the IP address or netmask automatically.
-Instead output a message
-to the console telling the user to configure the
-adapter manually and indicating the IP/netmask which
-OpenVPN expects the adapter to be set to.
-
-.B dynamic [offset] [lease\-time] \-\-
-Automatically set the IP address and netmask by replying to
-DHCP query messages generated by the kernel.  This mode is
-probably the "cleanest" solution
-for setting the TCP/IP properties since it uses the well\-known
-DHCP protocol.  There are, however, two prerequisites for using
-this mode: (1) The TCP/IP properties for the TAP\-Win32
-adapter must be set to "Obtain an IP address automatically," and
-(2) OpenVPN needs to claim an IP address in the subnet for use
-as the virtual DHCP server address.  By default in
-.B \-\-dev tap
-mode, OpenVPN will
-take the normally unused first address in the subnet.  For example,
-if your subnet is 192.168.4.0 netmask 255.255.255.0, then
-OpenVPN will take the IP address 192.168.4.0 to use as the
-virtual DHCP server address.  In
-.B \-\-dev tun
-mode, OpenVPN will cause the DHCP server to masquerade as if it were
-coming from the remote endpoint.  The optional offset parameter is
-an integer which is > \-256 and < 256 and which defaults to \-1.
-If offset is positive, the DHCP server will masquerade as the IP
-address at network address + offset.
-If offset is negative, the DHCP server will masquerade as the IP
-address at broadcast address + offset.  The Windows
-.B ipconfig /all
-command can be used to show what Windows thinks the DHCP server
-address is.  OpenVPN will "claim" this address, so make sure to
-use a free address.  Having said that, different OpenVPN instantiations,
-including different ends of the same connection, can share the same
-virtual DHCP server address.  The
-.B lease\-time
-parameter controls the lease time of the DHCP assignment given to
-the TAP\-Win32 adapter, and is denoted in seconds.
-Normally a very long lease time is preferred
-because it prevents routes involving the TAP\-Win32 adapter from
-being lost when the system goes to sleep.  The default
-lease time is one year.
-
-.B netsh \-\-
-Automatically set the IP address and netmask using
-the Windows command\-line "netsh"
-command.  This method appears to work correctly on
-Windows XP but not Windows 2000.
-
-.B ipapi \-\-
-Automatically set the IP address and netmask using the
-Windows IP Helper API.  This approach
-does not have ideal semantics, though testing has indicated
-that it works okay in practice.  If you use this option,
-it is best to leave the TCP/IP properties for the TAP\-Win32
-adapter in their default state, i.e. "Obtain an IP address
-automatically."
-
-.B adaptive \-\-
-(Default) Try
-.B dynamic
-method initially and fail over to
-.B netsh
-if the DHCP negotiation with the TAP\-Win32 adapter does
-not succeed in 20 seconds.  Such failures have been known
-to occur when certain third\-party firewall packages installed
-on the client machine block the DHCP negotiation used by
-the TAP\-Win32 adapter.
-Note that if the
-.B netsh
-failover occurs, the TAP\-Win32 adapter
-TCP/IP properties will be reset from DHCP to static, and this
-will cause future OpenVPN startups using the
-.B adaptive
-mode to use
-.B netsh
-immediately, rather than trying
-.B dynamic
-first.  To "unstick" the
-.B adaptive
-mode from using
-.B netsh,
-run OpenVPN at least once using the
-.B dynamic
-mode to restore the TAP\-Win32 adapter TCP/IP properties
-to a DHCP configuration.
-.\"*********************************************************
-.TP
-.B \-\-route\-method m
-Which method
-.B m
-to use for adding routes on Windows?
-
-.B adaptive
-(default) \-\- Try IP helper API first.  If that fails, fall
-back to the route.exe shell command.
-.br
-.B ipapi
-\-\- Use IP helper API.
-.br
-.B exe
-\-\- Call the route.exe shell command.
-.\"*********************************************************
-.TP
-.B \-\-dhcp\-option type [parm]
-Set extended TAP\-Win32 TCP/IP properties, must
-be used with
-.B \-\-ip\-win32 dynamic
-or
-.B \-\-ip\-win32 adaptive.
-This option can be used to set additional TCP/IP properties
-on the TAP\-Win32 adapter, and is particularly useful for
-configuring an OpenVPN client to access a Samba server
-across the VPN.
-
-.B DOMAIN name \-\-
-Set Connection\-specific DNS Suffix.
-
-.B DNS addr \-\-
-Set primary domain name server IPv4 or IPv6 address.  Repeat
-this option to set secondary DNS server addresses.
-
-Note: DNS IPv6 servers are currently set using netsh (the existing
-DHCP code can only do IPv4 DHCP, and that protocol only permits IPv4
-addresses anywhere).  The option will be put into the environment, so
-an
-.B \-\-up
-script could act upon it if needed.
-
-.B WINS addr \-\-
-Set primary WINS server address (NetBIOS over TCP/IP Name Server).
-Repeat this option to set secondary WINS server addresses.
-
-.B NBDD addr \-\-
-Set primary NBDD server address (NetBIOS over TCP/IP Datagram Distribution Server)
-Repeat this option
-to set secondary NBDD server addresses.
-
-.B NTP addr \-\-
-Set primary NTP server address (Network Time Protocol).
-Repeat this option
-to set secondary NTP server addresses.
-
-.B NBT type \-\-
-Set NetBIOS over TCP/IP Node type.  Possible options:
-.B 1
-= b\-node (broadcasts),
-.B 2
-= p\-node (point\-to\-point
-name queries to a WINS server),
-.B 4
-= m\-node (broadcast
-then query name server), and
-.B 8
-= h\-node (query name server, then broadcast).
-
-.B NBS scope\-id \-\-
-Set NetBIOS over TCP/IP Scope. A NetBIOS Scope ID provides an extended
-naming service for the NetBIOS over TCP/IP (Known as NBT) module. The
-primary purpose of a NetBIOS scope ID is to isolate NetBIOS traffic on
-a single network to only those nodes with the same NetBIOS scope ID.
-The NetBIOS scope ID is a character string that is appended to the NetBIOS
-name. The NetBIOS scope ID on two hosts must match, or the two hosts
-will not be able to communicate. The NetBIOS Scope ID also allows
-computers to use the same computer name, as they have different
-scope IDs. The Scope ID becomes a part of the NetBIOS name, making the name unique.
-(This description of NetBIOS scopes courtesy of NeonSurge@abyss.com)
-
-.B DISABLE\-NBT \-\-
-Disable Netbios\-over\-TCP/IP.
-
-Note that if
-.B \-\-dhcp\-option
-is pushed via
-.B \-\-push
-to a non\-windows client, the option will be saved in the client's
-environment before the up script is called, under
-the name "foreign_option_{n}".
-.\"*********************************************************
-.TP
-.B \-\-tap\-sleep n
-Cause OpenVPN to sleep for
-.B n
-seconds immediately after the TAP\-Win32 adapter state
-is set to "connected".
-
-This option is intended to be used to troubleshoot problems
-with the
-.B \-\-ifconfig
-and
-.B \-\-ip\-win32
-options, and is used to give
-the TAP\-Win32 adapter time to come up before
-Windows IP Helper API operations are applied to it.
-.\"*********************************************************
-.TP
-.B \-\-show\-net\-up
-Output OpenVPN's view of the system routing table and network
-adapter list to the syslog or log file after the TUN/TAP adapter
-has been brought up and any routes have been added.
-.\"*********************************************************
-.TP
-.B \-\-block\-outside\-dns
-Block DNS servers on other network adapters to prevent
-DNS leaks. This option prevents any application from accessing
-TCP or UDP port 53 except one inside the tunnel. It uses
-Windows Filtering Platform (WFP) and works on Windows Vista or
-later.
-
-This option is considered unknown on non\-Windows platforms
-and unsupported on Windows XP, resulting in fatal error.
-You may want to use
-.B \-\-setenv opt
-or
-.B \-\-ignore\-unknown\-option
-(not suitable for Windows XP) to ignore said error.
-Note that pushing unknown options from server does not trigger
-fatal errors.
-.\"*********************************************************
-.TP
-.B \-\-windows\-driver
-Specifies which tun driver to use. Values are
-.B tap-windows6
-(default) and
-.B wintun.
-This is Windows-only option.
-"wintun" requires
-.B \-\-dev tun
-and the OpenVPN process to run elevated, or be invoked using
-the Interactive Service.
-.\"*********************************************************
-.TP
-.B \-\-dhcp\-renew
-Ask Windows to renew the TAP adapter lease on startup.
-This option is normally unnecessary, as Windows automatically
-triggers a DHCP renegotiation on the TAP adapter when it
-comes up, however if you set the TAP\-Win32 adapter
-Media Status property to "Always Connected", you may need this
-flag.
-.\"*********************************************************
-.TP
-.B \-\-dhcp\-release
-Ask Windows to release the TAP adapter lease on shutdown.
-This option has no effect now, as it is enabled by default starting with OpenVPN 2.4.1.
-.\"*********************************************************
-.TP
-.B \-\-register\-dns
-Run ipconfig /flushdns and ipconfig /registerdns on connection initiation.
-This is known to kick Windows into
-recognizing pushed DNS servers.
-.\"*********************************************************
-.TP
-.B \-\-pause\-exit
-Put up a "press any key to continue" message on the console prior
-to OpenVPN program exit.  This option is automatically used by the
-Windows explorer when OpenVPN is run on a configuration
-file using the right\-click explorer menu.
-.\"*********************************************************
-.TP
-.B \-\-service exit\-event [0|1]
-Should be used when OpenVPN is being automatically executed by another
-program in such
-a context that no interaction with the user via display or keyboard
-is possible.  In general, end\-users should never need to explicitly
-use this option, as it is automatically added by the OpenVPN service wrapper
-when a given OpenVPN configuration is being run as a service.
-
-.B exit\-event
-is the name of a Windows global event object, and OpenVPN will continuously
-monitor the state of this event object and exit when it becomes signaled.
-
-The second parameter indicates the initial state of
-.B exit\-event
-and normally defaults to 0.
-
-Multiple OpenVPN processes can be simultaneously executed with the same
-.B exit\-event
-parameter.  In any case, the controlling process can signal
-.B exit\-event,
-causing all such OpenVPN processes to exit.
-
-When executing an OpenVPN process using the
-.B \-\-service
-directive, OpenVPN will probably not have a console
-window to output status/error
-messages, therefore it is useful to use
-.B \-\-log
-or
-.B \-\-log\-append
-to write these messages to a file.
-.\"*********************************************************
-.TP
-.B \-\-show\-adapters
-(Standalone)
-Show available TAP\-Win32 adapters which can be selected using the
-.B \-\-dev\-node
-option.  On non\-Windows systems, the
-.BR ifconfig (8)
-command provides similar functionality.
-.\"*********************************************************
-.TP
-.B \-\-allow\-nonadmin [TAP\-adapter]
-(Standalone)
-Set
-.B TAP\-adapter
-to allow access from non\-administrative accounts.  If
-.B TAP\-adapter
-is omitted, all TAP adapters on the system will be configured to allow
-non\-admin access.
-The non\-admin access setting will only persist for the length of time that
-the TAP\-Win32 device object and driver remain loaded, and will need
-to be re\-enabled after a reboot, or if the driver is unloaded
-and reloaded.
-This directive can only be used by an administrator.
-.\"*********************************************************
-.TP
-.B \-\-show\-valid\-subnets
-(Standalone)
-Show valid subnets for
-.B \-\-dev tun
-emulation.  Since the TAP\-Win32 driver
-exports an ethernet interface to Windows, and since TUN devices are
-point\-to\-point in nature, it is necessary for the TAP\-Win32 driver
-to impose certain constraints on TUN endpoint address selection.
-
-Namely, the point\-to\-point endpoints used in TUN device emulation
-must be the middle two addresses of a /30 subnet (netmask 255.255.255.252).
-.\"*********************************************************
-.TP
-.B \-\-show\-net
-(Standalone)
-Show OpenVPN's view of the system routing table and network
-adapter list.
-.\"*********************************************************
-.SS PKCS#11 Standalone Options:
-.\"*********************************************************
-.TP
-.B \-\-show\-pkcs11\-ids [provider] [cert_private]
-(Standalone)
-Show PKCS#11 token object list. Specify cert_private as 1
-if certificates are stored as private objects.
-
-If p11\-kit is present on the system, the
-.B provider
-argument is optional; if omitted the default
-.B p11\-kit\-proxy.so
-module will be queried.
-
-.B \-\-verb
-option can be used BEFORE this option to produce debugging information.
-.\"*********************************************************
-.SS Standalone Debug Options:
-.\"*********************************************************
-.TP
-.B \-\-show\-gateway [v6target]
-(Standalone)
-Show current IPv4 and IPv6 default gateway and interface towards the
-gateway (if the protocol in question is enabled).  If an IPv6 address
-is passed as argument, the IPv6 route for this host is reported.
-.\"*********************************************************
-.SS IPv6 Related Options
-.\"*********************************************************
-The following options exist to support IPv6 tunneling in peer\-to\-peer
-and client\-server mode.  All options are modeled after their IPv4
-counterparts, so more detailed explanations given there apply here
-as well (except for
-.B \-\-topology
-, which has no effect on IPv6).
-.TP
-.B \-\-ifconfig\-ipv6 ipv6addr/bits ipv6remote
-configure IPv6 address
-.B ipv6addr/bits
-on the ``tun'' device.  The second parameter is used as route target for
-.B \-\-route\-ipv6
-if no gateway is specified.
-.TP
-.B \-\-route\-ipv6 ipv6addr/bits [gateway] [metric]
-setup IPv6 routing in the system to send the specified IPv6 network
-into OpenVPN's ``tun''.  The gateway parameter is only used for
-IPv6 routes across ``tap'' devices, and if missing, the ``ipv6remote''
-field from
-.B \-\-ifconfig\-ipv6
-or
-.B \-\-route\-ipv6\-gateway
-is used.
-.TP
-.B \-\-route\-ipv6\-gateway gw
-Specify a default gateway
-.B gw
-for use with
-.B \-\-route\-ipv6.
-.TP
-.B \-\-server\-ipv6 ipv6addr/bits
-convenience\-function to enable a number of IPv6 related options at
-once, namely
-.B \-\-ifconfig\-ipv6, \-\-ifconfig\-ipv6\-pool
-and
-.B \-\-push tun\-ipv6
-Is only accepted if ``\-\-mode server'' or ``\-\-server'' is set. Pushing of the
-.B \-\-tun\-ipv6
-directive is done for older clients which require an explicit
-``\-\-tun\-ipv6'' in their configuration.
-.TP
-.B \-\-ifconfig\-ipv6\-pool ipv6addr/bits
-Specify an IPv6 address pool for dynamic assignment to clients.  The
-pool starts at
-.B ipv6addr
-and matches the offset determined from the start of the IPv4 pool.
-.TP
-.B \-\-ifconfig\-ipv6\-push ipv6addr/bits ipv6remote
-for ccd/ per\-client static IPv6 interface configuration, see
-.B \-\-client\-config\-dir
-and
-.B \-\-ifconfig\-push
-for more details.
-.TP
-.B \-\-iroute\-ipv6 ipv6addr/bits
-for ccd/ per\-client static IPv6 route configuration, see
-.B \-\-iroute
-for more details how to setup and use this, and how
-.B \-\-iroute
-and
-.B \-\-route
-interact.
-
-.\"*********************************************************
-.SH SCRIPTING AND ENVIRONMENTAL VARIABLES
-OpenVPN exports a series
-of environmental variables for use by user\-defined scripts.
-.\"*********************************************************
-.SS Script Order of Execution
-.\"*********************************************************
-.TP
-.B \-\-up
-Executed after TCP/UDP socket bind and TUN/TAP open.
-.\"*********************************************************
-.TP
-.B \-\-tls\-verify
-Executed when we have a still untrusted remote peer.
-.\"*********************************************************
-.TP
-.B \-\-ipchange
-Executed after connection authentication, or remote IP address change.
-.\"*********************************************************
-.TP
-.B \-\-client\-connect
-Executed in
-.B \-\-mode server
-mode immediately after client authentication.
-.\"*********************************************************
-.TP
-.B \-\-route\-up
-Executed after connection authentication, either
-immediately after, or some number of seconds after
-as defined by the
-.B \-\-route\-delay
-option.
-.\"*********************************************************
-.TP
-.B \-\-route\-pre\-down
-Executed right before the routes are removed.
-.\"*********************************************************
-.TP
-.B \-\-client\-disconnect
-Executed in
-.B \-\-mode server
-mode on client instance shutdown.
-.\"*********************************************************
-.TP
-.B \-\-down
-Executed after TCP/UDP and TUN/TAP close.
-.\"*********************************************************
-.TP
-.B \-\-learn\-address
-Executed in
-.B \-\-mode server
-mode whenever an IPv4 address/route or MAC address is added to OpenVPN's
-internal routing table.
-.\"*********************************************************
-.TP
-.B \-\-auth\-user\-pass\-verify
-Executed in
-.B \-\-mode server
-mode on new client connections, when the client is
-still untrusted.
-.\"*********************************************************
-.SS String Types and Remapping
-In certain cases, OpenVPN will perform remapping of characters
-in strings.  Essentially, any characters outside the set of
-permitted characters for each string type will be converted
-to underbar ('_').
-
-.B Q:
-Why is string remapping necessary?
-
-.B A:
-It's an important security feature to prevent the malicious coding of
-strings from untrusted sources to be passed as parameters to scripts,
-saved in the environment, used as a common name, translated to a filename,
-etc.
-
-.B Q:
-Can string remapping be disabled?
-
-.B A:
-Yes, by using the
-.B \-\-no\-name\-remapping
-option, however this should be considered an advanced option.
-
-Here is a brief rundown of OpenVPN's current string types and the 
-permitted character class for each string:
-
-.B X509 Names:
-Alphanumeric, underbar ('_'), dash ('\-'), dot ('.'), at
-('@'), colon (':'), slash ('/'), and equal ('=').  Alphanumeric is defined 
-as a character which will cause the C library isalnum() function to return 
-true.
-
-.B Common Names:
-Alphanumeric, underbar ('_'), dash ('\-'), dot ('.'), and at
-('@').
-
-.B \-\-auth\-user\-pass username:
-Same as Common Name, with one exception: starting with OpenVPN 2.0.1,
-the username is passed to the OPENVPN_PLUGIN_AUTH_USER_PASS_VERIFY plugin in its raw form,
-without string remapping.
-
-.B \-\-auth\-user\-pass password:
-Any "printable" character except CR or LF.  
-Printable is defined to be a character which will cause the C library 
-isprint() function to return true.
-
-.B \-\-client\-config\-dir filename as derived from common name or username:
-Alphanumeric, underbar ('_'), dash ('\-'), and dot ('.') except for "." or
-".." as standalone strings.  As of v2.0.1\-rc6, the at ('@') character has
-been added as well for compatibility with the common name character class.
-
-.B Environmental variable names:
-Alphanumeric or underbar ('_').
-
-.B Environmental variable values:
-Any printable character.
-
-For all cases, characters in a string which are not members of the legal 
-character class for that string type will be remapped to underbar ('_').
-.\"*********************************************************
-.SS Environmental Variables
-Once set, a variable is persisted
-indefinitely until it is reset by a new value or a restart,
-
-As of OpenVPN 2.0\-beta12, in server mode, environmental
-variables set by OpenVPN
-are scoped according to the client objects
-they are
-associated with, so there should not be any issues with
-scripts having access to stale, previously set variables
-which refer to different client instances.
-.\"*********************************************************
-.TP
-.B bytes_received
-Total number of bytes received from client during VPN session.
-Set prior to execution of the
-.B \-\-client\-disconnect
-script.
-.\"*********************************************************
-.TP
-.B bytes_sent
-Total number of bytes sent to client during VPN session.
-Set prior to execution of the
-.B \-\-client\-disconnect
-script.
-.\"*********************************************************
-.TP
-.B common_name
-The X509 common name of an authenticated client.
-Set prior to execution of
-.B \-\-client\-connect, \-\-client\-disconnect,
-and
-.B \-\-auth\-user\-pass\-verify
-scripts.
-.\"*********************************************************
-.TP
-.B config
-Name of first
-.B \-\-config
-file.
-Set on program initiation and reset on SIGHUP.
-.\"*********************************************************
-.TP
-.B daemon
-Set to "1" if the
-.B \-\-daemon
-directive is specified, or "0" otherwise.
-Set on program initiation and reset on SIGHUP.
-.\"*********************************************************
-.TP
-.B daemon_log_redirect
-Set to "1" if the
-.B \-\-log
-or
-.B \-\-log\-append
-directives are specified, or "0" otherwise.
-Set on program initiation and reset on SIGHUP.
-.\"*********************************************************
-.TP
-.B dev
-The actual name of the TUN/TAP device, including
-a unit number if it exists.
-Set prior to
-.B \-\-up
-or
-.B \-\-down
-script execution.
-.\"*********************************************************
-.TP
-.B dev_idx
-On Windows, the device index of the TUN/TAP adapter (to
-be used in netsh.exe calls which sometimes just do not work
-right with interface names).
-Set prior to
-.B \-\-up
-or
-.B \-\-down
-script execution.
-.\"*********************************************************
-.TP
-.B foreign_option_{n}
-An option pushed via
-.B \-\-push
-to a client which does not natively support it,
-such as
-.B \-\-dhcp\-option
-on a non\-Windows system, will be recorded to this
-environmental variable sequence prior to
-.B \-\-up
-script execution.
-.\"*********************************************************
-.TP
-.B ifconfig_broadcast
-The broadcast address for the virtual
-ethernet segment which is derived from the
-.B \-\-ifconfig
-option when
-.B \-\-dev tap
-is used.
-Set prior to OpenVPN calling the
-.I ifconfig
-or
-.I netsh
-(windows version of ifconfig) commands which
-normally occurs prior to
-.B \-\-up
-script execution.
-.\"*********************************************************
-.TP
-.B ifconfig_ipv6_local
-The local VPN endpoint IPv6 address specified in the
-.B \-\-ifconfig\-ipv6
-option (first parameter).
-Set prior to OpenVPN calling the
-.I ifconfig
-or
-.I netsh
-(windows version of ifconfig) commands which
-normally occurs prior to
-.B \-\-up
-script execution.
-.\"*********************************************************
-.TP
-.B ifconfig_ipv6_netbits
-The prefix length of the IPv6 network on the VPN interface.  Derived from
-the /nnn parameter of the IPv6 address in the
-.B \-\-ifconfig\-ipv6
-option (first parameter).
-Set prior to OpenVPN calling the
-.I ifconfig
-or
-.I netsh
-(windows version of ifconfig) commands which
-normally occurs prior to
-.B \-\-up
-script execution.
-.\"*********************************************************
-.TP
-.B ifconfig_ipv6_remote
-The remote VPN endpoint IPv6 address specified in the
-.B \-\-ifconfig\-ipv6
-option (second parameter).
-Set prior to OpenVPN calling the
-.I ifconfig
-or
-.I netsh
-(windows version of ifconfig) commands which
-normally occurs prior to
-.B \-\-up
-script execution.
-.\"*********************************************************
-.TP
-.B ifconfig_local
-The local VPN endpoint IP address specified in the
-.B \-\-ifconfig
-option (first parameter).
-Set prior to OpenVPN calling the
-.I ifconfig
-or
-.I netsh
-(windows version of ifconfig) commands which
-normally occurs prior to
-.B \-\-up
-script execution.
-.\"*********************************************************
-.TP
-.B ifconfig_remote
-The remote VPN endpoint IP address specified in the
-.B \-\-ifconfig
-option (second parameter) when
-.B \-\-dev tun
-is used.
-Set prior to OpenVPN calling the
-.I ifconfig
-or
-.I netsh
-(windows version of ifconfig) commands which
-normally occurs prior to
-.B \-\-up
-script execution.
-.\"*********************************************************
-.TP
-.B ifconfig_netmask
-The subnet mask of the virtual ethernet segment
-that is specified as the second parameter to
-.B \-\-ifconfig
-when
-.B \-\-dev tap
-is being used.
-Set prior to OpenVPN calling the
-.I ifconfig
-or
-.I netsh
-(windows version of ifconfig) commands which
-normally occurs prior to
-.B \-\-up
-script execution.
-.\"*********************************************************
-.TP
-.B ifconfig_pool_local_ip
-The local
-virtual IP address for the TUN/TAP tunnel taken from an
-.B \-\-ifconfig\-push
-directive if specified, or otherwise from
-the ifconfig pool (controlled by the
-.B \-\-ifconfig\-pool
-config file directive).
-Only set for
-.B \-\-dev tun
-tunnels.
-This option is set on the server prior to execution
-of the
-.B \-\-client\-connect
-and
-.B \-\-client\-disconnect
-scripts.
-.\"*********************************************************
-.TP
-.B ifconfig_pool_netmask
-The
-virtual IP netmask for the TUN/TAP tunnel taken from an
-.B \-\-ifconfig\-push
-directive if specified, or otherwise from
-the ifconfig pool (controlled by the
-.B \-\-ifconfig\-pool
-config file directive).
-Only set for
-.B \-\-dev tap
-tunnels.
-This option is set on the server prior to execution
-of the
-.B \-\-client\-connect
-and
-.B \-\-client\-disconnect
-scripts.
-.\"*********************************************************
-.TP
-.B ifconfig_pool_remote_ip
-The remote
-virtual IP address for the TUN/TAP tunnel taken from an
-.B \-\-ifconfig\-push
-directive if specified, or otherwise from
-the ifconfig pool (controlled by the
-.B \-\-ifconfig\-pool
-config file directive).
-This option is set on the server prior to execution
-of the
-.B \-\-client\-connect
-and
-.B \-\-client\-disconnect
-scripts.
-.\"*********************************************************
-.TP
-.B link_mtu
-The maximum packet size (not including the IP header)
-of tunnel data in UDP tunnel transport mode.
-Set prior to
-.B \-\-up
-or
-.B \-\-down
-script execution.
-.\"*********************************************************
-.TP
-.B local
-The
-.B \-\-local
-parameter.
-Set on program initiation and reset on SIGHUP.
-.\"*********************************************************
-.TP
-.B local_port
-The local port number or name, specified by
-.B \-\-port
-or
-.B \-\-lport.
-Set on program initiation and reset on SIGHUP.
-.\"*********************************************************
-.TP
-.B password
-The password provided by a connecting client.
-Set prior to
-.B \-\-auth\-user\-pass\-verify
-script execution only when the
-.B via\-env
-modifier is specified, and deleted from the environment
-after the script returns.
-.\"*********************************************************
-.TP
-.B proto
-The
-.B \-\-proto
-parameter.
-Set on program initiation and reset on SIGHUP.
-.\"*********************************************************
-.TP
-.B remote_{n}
-The
-.B \-\-remote
-parameter.
-Set on program initiation and reset on SIGHUP.
-.\"*********************************************************
-.TP
-.B remote_port_{n}
-The remote port number, specified by
-.B \-\-port
-or
-.B \-\-rport.
-Set on program initiation and reset on SIGHUP.
-.\"*********************************************************
-.TP
-.B route_net_gateway
-The pre\-existing default IP gateway in the system routing
-table.
-Set prior to
-.B \-\-up
-script execution.
-.\"*********************************************************
-.TP
-.B route_vpn_gateway
-The default gateway used by
-.B \-\-route
-options, as specified in either the
-.B \-\-route\-gateway
-option or the second parameter to
-.B \-\-ifconfig
-when
-.B \-\-dev tun
-is specified.
-Set prior to
-.B \-\-up
-script execution.
-.\"*********************************************************
-.TP
-.B route_{parm}_{n}
-A set of variables which define each route to be added, and
-are set prior to
-.B \-\-up
-script execution.
-
-.B parm
-will be one of "network", "netmask", "gateway", or "metric".
-
-.B n
-is the OpenVPN route number, starting from 1.
-
-If the network or gateway are resolvable DNS names,
-their IP address translations will be recorded rather
-than their names as denoted on the command line
-or configuration file.
-.\"*********************************************************
-.TP
-.B route_ipv6_{parm}_{n}
-A set of variables which define each IPv6 route to be added, and
-are set prior to
-.B \-\-up
-script execution.
-
-.B parm
-will be one of "network" or "gateway" ("netmask" is contained as "/nnn"
-in the route_ipv6_network_{n}, unlike IPv4 where it is passed in a separate
-environment variable).
-
-.B n
-is the OpenVPN route number, starting from 1.
-
-If the network or gateway are resolvable DNS names,
-their IP address translations will be recorded rather
-than their names as denoted on the command line
-or configuration file.
-.\"*********************************************************
-.TP
-.B peer_cert
-Temporary file name containing the client certificate upon
-connection.  Useful in conjunction with \-\-tls\-verify
-.\"*********************************************************
-.TP
-.B script_context
-Set to "init" or "restart" prior to up/down script execution.
-For more information, see
-documentation for
-.B \-\-up.
-.\"*********************************************************
-.TP
-.B script_type
-Prior to execution of any script, this variable is set to the type of
-script being run.  It can be one of the following:
-.B up, down, ipchange, route\-up, tls\-verify, auth\-user\-pass\-verify,
-.B client\-connect, client\-disconnect,
-or
-.B learn\-address.
-Set prior to execution of any script.
-.\"*********************************************************
-.TP
-.B signal
-The reason for exit or restart.  Can be one of
-.B sigusr1, sighup, sigterm, sigint, inactive
-(controlled by
-.B \-\-inactive
-option),
-.B ping\-exit
-(controlled by
-.B \-\-ping\-exit
-option),
-.B ping\-restart
-(controlled by
-.B \-\-ping\-restart
-option),
-.B connection\-reset
-(triggered on TCP connection reset),
-.B error,
-or
-.B unknown
-(unknown signal).  This variable is set just prior to down script execution.
-.\"*********************************************************
-.TP
-.B time_ascii
-Client connection timestamp, formatted as a human\-readable
-time string.
-Set prior to execution of the
-.B \-\-client\-connect
-script.
-.\"*********************************************************
-.TP
-.B time_duration
-The duration (in seconds) of the client session which is now
-disconnecting.
-Set prior to execution of the
-.B \-\-client\-disconnect
-script.
-.\"*********************************************************
-.TP
-.B time_unix
-Client connection timestamp, formatted as a unix integer
-date/time value.
-Set prior to execution of the
-.B \-\-client\-connect
-script.
-.\"*********************************************************
-.TP
-.B tls_digest_{n} / tls_digest_sha256_{n}
-Contains the certificate SHA1 / SHA256 fingerprint, where
-.B n
-is the verification level.  Only set for TLS connections.  Set prior
-to execution of
-.B \-\-tls\-verify
-script.
-.\"*********************************************************
-.TP
-.B tls_id_{n}
-A series of certificate fields from the remote peer,
-where
-.B n
-is the verification level.  Only set for TLS connections.  Set prior
-to execution of
-.B \-\-tls\-verify
-script.
-.\"*********************************************************
-.TP
-.B tls_serial_{n}
-The serial number of the certificate from the remote peer,
-where
-.B n
-is the verification level.  Only set for TLS connections.  Set prior
-to execution of
-.B \-\-tls\-verify
-script. This is in the form of a decimal string like "933971680", which is
-suitable for doing serial\-based OCSP queries (with OpenSSL, do not
-prepend "0x" to the string) If something goes wrong while reading
-the value from the certificate it will be an empty string, so your
-code should check that.
-See the contrib/OCSP_check/OCSP_check.sh script for an example.
-.\"*********************************************************
-.TP
-.B tls_serial_hex_{n}
-Like
-.B tls_serial_{n}\fR,
-but in hex form (e.g. "12:34:56:78:9A").
-.\"*********************************************************
-.TP
-.B tun_mtu
-The MTU of the TUN/TAP device.
-Set prior to
-.B \-\-up
-or
-.B \-\-down
-script execution.
-.\"*********************************************************
-.TP
-.B trusted_ip (or trusted_ip6)
-Actual IP address of connecting client or peer which has been authenticated.
-Set prior to execution of
-.B \-\-ipchange, \-\-client\-connect,
-and
-.B \-\-client\-disconnect
-scripts.
-If using ipv6 endpoints (udp6, tcp6),
-.B trusted_ip6
-will be set instead.
-.\"*********************************************************
-.TP
-.B trusted_port
-Actual port number of connecting client or peer which has been authenticated.
-Set prior to execution of
-.B \-\-ipchange, \-\-client\-connect,
-and
-.B \-\-client\-disconnect
-scripts.
-.\"*********************************************************
-.TP
-.B untrusted_ip (or untrusted_ip6)
-Actual IP address of connecting client or peer which has not been authenticated
-yet.  Sometimes used to
-.B nmap
-the connecting host in a
-.B \-\-tls\-verify
-script to ensure it is firewalled properly.
-Set prior to execution of
-.B \-\-tls\-verify
-and
-.B \-\-auth\-user\-pass\-verify
-scripts.
-If using ipv6 endpoints (udp6, tcp6),
-.B untrusted_ip6
-will be set instead.
-.\"*********************************************************
-.TP
-.B untrusted_port
-Actual port number of connecting client or peer which has not been authenticated
-yet.
-Set prior to execution of
-.B \-\-tls\-verify
-and
-.B \-\-auth\-user\-pass\-verify
-scripts.
-.\"*********************************************************
-.TP
-.B username
-The username provided by a connecting client.
-Set prior to
-.B \-\-auth\-user\-pass\-verify
-script execution only when the
-.B via\-env
-modifier is specified.
-.\"*********************************************************
-.TP
-.B X509_{n}_{subject_field}
-An X509 subject field from the remote peer certificate,
-where
-.B n
-is the verification level.  Only set for TLS connections.  Set prior
-to execution of
-.B \-\-tls\-verify
-script.  This variable is similar to
-.B tls_id_{n}
-except the component X509 subject fields are broken out, and
-no string remapping occurs on these field values (except for remapping
-of control characters to "_").
-For example, the following variables would be set on the
-OpenVPN server using the sample client certificate
-in sample\-keys (client.crt).
-Note that the verification level is 0 for the client certificate
-and 1 for the CA certificate.
-
-.nf
-.ft 3
-.in +4
-X509_0_emailAddress=me@myhost.mydomain
-X509_0_CN=Test\-Client
-X509_0_O=OpenVPN\-TEST
-X509_0_ST=NA
-X509_0_C=KG
-X509_1_emailAddress=me@myhost.mydomain
-X509_1_O=OpenVPN\-TEST
-X509_1_L=BISHKEK
-X509_1_ST=NA
-X509_1_C=KG
-.in -4
-.ft
-.fi
-.\"*********************************************************
-.SH INLINE FILE SUPPORT
-OpenVPN allows including files in the main configuration for the
-.B \-\-ca, \-\-cert, \-\-dh, \-\-extra\-certs, \-\-key, \-\-pkcs12, \-\-secret,
-.B \-\-crl\-verify, \-\-http\-proxy\-user\-pass, \-\-tls\-auth,
-.B \-\-auth\-gen\-token\-secret
-.B \-\-tls\-crypt,
-and
-.B \-\-tls\-crypt-v2
-options.
-
-Each inline file started by the line
-.B <option>
-and ended by the line
-.B </option>
-
-Here is an example of an inline file usage
-
-.nf
-.ft 3
-.in +4
-<cert>
-\-\-\-\-\-BEGIN CERTIFICATE\-\-\-\-\-
-[...]
-\-\-\-\-\-END CERTIFICATE\-\-\-\-\-
-</cert>
-.in -4
-.ft
-.fi
-
-When using the inline file feature with
-.B \-\-pkcs12
-the inline file has to be base64 encoded. Encoding of a .p12 file into base64 can be done for example with OpenSSL by running
-.B openssl base64 \-in input.p12
-
-.SH SIGNALS
-.TP
-.B SIGHUP
-Cause OpenVPN to close all TUN/TAP and
-network connections,
-restart, re\-read the configuration file (if any),
-and reopen TUN/TAP and network connections.
-.\"*********************************************************
-.TP
-.B SIGUSR1
-Like 
-.B SIGHUP,
-except don't re\-read configuration file, and possibly don't close and reopen TUN/TAP
-device, re\-read key files, preserve local IP address/port, or preserve most recently authenticated
-remote IP address/port based on
-.B \-\-persist\-tun, \-\-persist\-key, \-\-persist\-local\-ip,
-and
-.B \-\-persist\-remote\-ip
-options respectively (see above).
-
-This signal may also be internally generated by a timeout condition, governed
-by the
-.B \-\-ping\-restart
-option.
-
-This signal, when combined with
-.B \-\-persist\-remote\-ip,
-may be
-sent when the underlying parameters of the host's network interface change
-such as when the host is a DHCP client and is assigned a new IP address.
-See
-.B \-\-ipchange
-above for more information.
-.\"*********************************************************
-.TP
-.B SIGUSR2
-Causes OpenVPN to display its current statistics (to the syslog
-file if
-.B \-\-daemon
-is used, or stdout otherwise).
-.\"*********************************************************
-.TP
-.B SIGINT, SIGTERM
-Causes OpenVPN to exit gracefully.
-.\"*********************************************************
-.SH TUN/TAP DRIVER SETUP
-If you are running Linux 2.4.7 or higher, you probably have the TUN/TAP driver
-already installed.  If so, there are still a few things you need to do:
-
-Make device:
-.B mknod /dev/net/tun c 10 200
-
-Load driver:
-.B modprobe tun
-.\"*********************************************************
-.SH EXAMPLES
-Prior to running these examples, you should have OpenVPN installed on two
-machines with network connectivity between them.  If you have not
-yet installed OpenVPN, consult the INSTALL file included in the OpenVPN
-distribution.
-.\"*********************************************************
-.SS TUN/TAP Setup:
-If you are using Linux 2.4 or higher,
-make the tun device node and load the tun module:
-.IP
-.B mknod /dev/net/tun c 10 200
-.LP
-.IP
-.B modprobe tun
-.LP
-If you installed from RPM, the
-.B mknod
-step may be omitted, because the RPM install does that for you.
-
-Only Linux 2.4 and newer are supported.
-
-For other platforms, consult the INSTALL file at
-.I http://openvpn.net/install.html
-for more information.
-.\"*********************************************************
-.SS Firewall Setup:
-If firewalls exist between
-the two machines, they should be set to forward UDP port 1194
-in both directions.  If you do not have control over the firewalls
-between the two machines, you may still be able to use OpenVPN by adding
-.B \-\-ping 15
-to each of the
-.B openvpn
-commands used below in the examples (this will cause each peer to send out
-a UDP ping to its remote peer once every 15 seconds which will cause many
-stateful firewalls to forward packets in both directions
-without an explicit firewall rule).
-
-If you are using a Linux iptables\-based firewall, you may need to enter
-the following command to allow incoming packets on the TUN device:
-.IP
-.B iptables \-A INPUT \-i tun+ \-j ACCEPT
-.LP
-See the firewalls section below for more information on configuring firewalls
-for use with OpenVPN.
-.\"*********************************************************
-.SS VPN Address Setup:
-For purposes
-of our example, our two machines will be called
-.B bob.example.com
-and
-.B alice.example.com.
-If you are constructing a VPN over the internet, then replace
-.B bob.example.com
-and
-.B alice.example.com
-with the internet hostname or IP address that each machine will use
-to contact the other over the internet.
-
-Now we will choose the tunnel endpoints.  Tunnel endpoints are
-private IP addresses that only have meaning in the context of
-the VPN.  Each machine will use the tunnel endpoint of the other
-machine to access it over the VPN.  In our example,
-the tunnel endpoint for bob.example.com
-will be 10.4.0.1 and for alice.example.com, 10.4.0.2.
-
-Once the VPN is established, you have essentially
-created a secure alternate path between the two hosts
-which is addressed by using the tunnel endpoints.  You can
-control which network
-traffic passes between the hosts 
-(a) over the VPN or (b) independently of the VPN, by choosing whether to use
-(a) the VPN endpoint address or (b) the public internet address,
-to access the remote host. For example if you are on bob.example.com and you wish to connect to alice.example.com
-via
-.B ssh
-without using the VPN (since
-.B ssh
-has its own built\-in security) you would use the command
-.B ssh alice.example.com.
-However in the same scenario, you could also use the command
-.B telnet 10.4.0.2
-to create a telnet session with alice.example.com over the VPN, that would
-use the VPN to secure the session rather than
-.B ssh.
-
-You can use any address you wish for the
-tunnel endpoints
-but make sure that they are private addresses
-(such as those that begin with 10 or 192.168) and that they are
-not part of any existing subnet on the networks of
-either peer, unless you are bridging.  If you use an address that is part of
-your local subnet for either of the tunnel endpoints,
-you will get a weird feedback loop.
-.\"*********************************************************
-.SS Example 1: A simple tunnel without security
-.LP
-On bob:
-.IP
-.B openvpn \-\-remote alice.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.1 10.4.0.2 \-\-verb 9
-.LP
-On alice:
-.IP
-.B openvpn \-\-remote bob.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.2 10.4.0.1 \-\-verb 9
-.LP
-Now verify the tunnel is working by pinging across the tunnel.
-.LP
-On bob:
-.IP
-.B ping 10.4.0.2
-.LP
-On alice:
-.IP
-.B ping 10.4.0.1
-.LP
-The
-.B \-\-verb 9
-option will produce verbose output, similar to the
-.BR tcpdump (8)
-program.  Omit the
-.B \-\-verb 9
-option to have OpenVPN run quietly.
-.\"*********************************************************
-.SS Example 2: A tunnel with static\-key security (i.e. using a pre\-shared secret)
-First build a static key on bob.
-.IP
-.B openvpn \-\-genkey \-\-secret key
-.LP
-This command will build a key file called
-.B key
-(in ascii format).
-Now copy
-.B key
-to alice over a secure medium such as by
-using the
-.BR scp (1)
-program.
-.LP
-On bob:
-.IP
-.B openvpn \-\-remote alice.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.1 10.4.0.2 \-\-verb 5 \-\-secret key
-.LP
-On alice:
-.IP
-.B openvpn \-\-remote bob.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.2 10.4.0.1 \-\-verb 5 \-\-secret key
-.LP
-Now verify the tunnel is working by pinging across the tunnel.
-.LP
-On bob:
-.IP
-.B ping 10.4.0.2
-.LP
-On alice:
-.IP
-.B ping 10.4.0.1
-.\"*********************************************************
-.SS Example 3: A tunnel with full TLS\-based security
-For this test, we will designate
-.B bob
-as the TLS client and
-.B alice
-as the TLS server.
-.I Note that client or server designation only has meaning for the TLS subsystem.  It has no bearing on OpenVPN's peer\-to\-peer, UDP\-based communication model.
-
-First, build a separate certificate/key pair
-for both bob and alice (see above where
-.B \-\-cert
-is discussed for more info).  Then construct
-Diffie Hellman parameters (see above where
-.B \-\-dh
-is discussed for more info).  You can also use the
-included test files client.crt, client.key,
-server.crt, server.key and ca.crt.
-The .crt files are certificates/public\-keys, the .key
-files are private keys, and ca.crt is a certification
-authority who has signed both
-client.crt and server.crt.  For Diffie Hellman
-parameters you can use the included file dh1024.pem.
-.I Note that all client, server, and certificate authority certificates and keys included in the OpenVPN distribution are totally insecure and should be used for testing only.
-.LP
-On bob:
-.IP
-.B openvpn \-\-remote alice.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.1 10.4.0.2 \-\-tls\-client \-\-ca ca.crt \-\-cert client.crt \-\-key client.key \-\-reneg\-sec 60 \-\-verb 5
-.LP
-On alice:
-.IP
-.B openvpn \-\-remote bob.example.com \-\-dev tun1 \-\-ifconfig 10.4.0.2 10.4.0.1 \-\-tls\-server \-\-dh dh1024.pem \-\-ca ca.crt \-\-cert server.crt \-\-key server.key \-\-reneg\-sec 60 \-\-verb 5
-.LP
-Now verify the tunnel is working by pinging across the tunnel.
-.LP
-On bob:
-.IP
-.B ping 10.4.0.2
-.LP
-On alice:
-.IP
-.B ping 10.4.0.1
-.LP
-Notice the
-.B \-\-reneg\-sec 60
-option we used above.  That tells OpenVPN to renegotiate
-the data channel keys every minute.
-Since we used
-.B \-\-verb 5
-above, you will see status information on each new key negotiation.
-
-For production operations, a key renegotiation interval of 60 seconds
-is probably too frequent.  Omit the
-.B \-\-reneg\-sec 60
-option to use OpenVPN's default key renegotiation interval of one hour.
-.\"*********************************************************
-.SS Routing:
-Assuming you can ping across the tunnel,
-the next step is to route a real subnet over
-the secure tunnel.  Suppose that bob and alice have two network
-interfaces each, one connected
-to the internet, and the other to a private
-network.  Our goal is to securely connect
-both private networks.  We will assume that bob's private subnet
-is 10.0.0.0/24 and alice's is 10.0.1.0/24.
-.LP
-First, ensure that IP forwarding is enabled on both peers.
-On Linux, enable routing:
-.IP
-.B echo 1 > /proc/sys/net/ipv4/ip_forward
-.LP
-and enable TUN packet forwarding through the firewall:
-.IP
-.B iptables \-A FORWARD \-i tun+ \-j ACCEPT
-.LP
-On bob:
-.IP
-.B route add \-net 10.0.1.0 netmask 255.255.255.0 gw 10.4.0.2
-.LP
-On alice:
-.IP
-.B route add \-net 10.0.0.0 netmask 255.255.255.0 gw 10.4.0.1
-.LP
-Now any machine on the 10.0.0.0/24 subnet can
-access any machine on the 10.0.1.0/24 subnet
-over the secure tunnel (or vice versa).
-
-In a production environment, you could put the route command(s)
-in a script and execute with the
-.B \-\-up
-option.
-.\"*********************************************************
-.SH FIREWALLS
-OpenVPN's usage of a single UDP port makes it fairly firewall\-friendly.
-You should add an entry to your firewall rules to allow incoming OpenVPN
-packets.  On Linux 2.4+:
-.IP
-.B iptables \-A INPUT \-p udp \-s 1.2.3.4 \-\-dport 1194 \-j ACCEPT
-.LP
-This will allow incoming packets on UDP port 1194 (OpenVPN's default UDP port)
-from an OpenVPN peer at 1.2.3.4.
-
-If you are using HMAC\-based packet authentication (the default in any of
-OpenVPN's secure modes), having the firewall filter on source
-address can be considered optional, since HMAC packet authentication
-is a much more secure method of verifying the authenticity of
-a packet source.  In that case:
-.IP
-.B iptables \-A INPUT \-p udp \-\-dport 1194 \-j ACCEPT
-.LP
-would be adequate and would not render the host inflexible with
-respect to its peer having a dynamic IP address.
-
-OpenVPN also works well on stateful firewalls.  In some cases, you may
-not need to add any static rules to the firewall list if you are
-using a stateful firewall that knows how to track UDP connections.
-If you specify
-.B \-\-ping n,
-OpenVPN will be guaranteed
-to send a packet to its peer at least once every
-.B n
-seconds.  If
-.B n
-is less than the stateful firewall connection timeout, you can
-maintain an OpenVPN connection indefinitely without explicit
-firewall rules.
-
-You should also add firewall rules to allow incoming IP traffic on
-TUN or TAP devices such as:
-.IP
-.B iptables \-A INPUT \-i tun+ \-j ACCEPT
-.LP
-to allow input packets from tun devices,
-.IP
-.B iptables \-A FORWARD \-i tun+ \-j ACCEPT
-.LP
-to allow input packets from tun devices to be forwarded to
-other hosts on the local network,
-.IP
-.B iptables \-A INPUT \-i tap+ \-j ACCEPT
-.LP
-to allow input packets from tap devices, and
-.IP
-.B iptables \-A FORWARD \-i tap+ \-j ACCEPT
-.LP
-to allow input packets from tap devices to be forwarded to
-other hosts on the local network.
-
-These rules are secure if you use packet authentication,
-since no incoming packets will arrive on a TUN or TAP
-virtual device
-unless they first pass an HMAC authentication test.
-.\"*********************************************************
-.SH FAQ
-.I http://openvpn.net/faq.html
-.\"*********************************************************
-.SH HOWTO
-For a more comprehensive guide to setting up OpenVPN
-in a production setting, see the OpenVPN HOWTO at
-.I http://openvpn.net/howto.html
-.\"*********************************************************
-.SH PROTOCOL
-For a description of OpenVPN's underlying protocol,
-see 
-.I http://openvpn.net/security.html
-.\"*********************************************************
-.SH WEB
-OpenVPN's web site is at
-.I http://openvpn.net/
-
-Go here to download the latest version of OpenVPN, subscribe
-to the mailing lists, read the mailing list
-archives, or browse the SVN repository.
-.\"*********************************************************
-.SH BUGS
-Report all bugs to the OpenVPN team <info@openvpn.net>.
-.\"*********************************************************
-.SH "SEE ALSO"
-.BR dhcpcd (8),
-.BR ifconfig (8),
-.BR openssl (1),
-.BR route (8),
-.BR scp (1)
-.BR ssh (1)
-.\"*********************************************************
-.SH NOTES 
-.LP
-This product includes software developed by the
-OpenSSL Project (
-.I http://www.openssl.org/
-)
-
-For more information on the TLS protocol, see
-.I http://www.ietf.org/rfc/rfc2246.txt
-
-For more information on the LZO real\-time compression library see
-.I http://www.oberhumer.com/opensource/lzo/
-.\"*********************************************************
-.SH COPYRIGHT
-Copyright (C) 2002\-2018 OpenVPN Inc This program is free software;
-you can redistribute it and/or modify
-it under the terms of the GNU General Public License version 2
-as published by the Free Software Foundation.
-.\"*********************************************************
-.SH AUTHORS
-James Yonan <jim@yonan.net>