new file mode 100644
@@ -0,0 +1,273 @@
+# ===========================================================================
+# https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_CODE_COVERAGE()
+#
+# DESCRIPTION
+#
+# Defines CODE_COVERAGE_CPPFLAGS, CODE_COVERAGE_CFLAGS,
+# CODE_COVERAGE_CXXFLAGS and CODE_COVERAGE_LIBS which should be included
+# in the CPPFLAGS, CFLAGS CXXFLAGS and LIBS/LIBADD variables of every
+# build target (program or library) which should be built with code
+# coverage support. Also add rules using AX_ADD_AM_MACRO_STATIC; and
+# $enable_code_coverage which can be used in subsequent configure output.
+# CODE_COVERAGE_ENABLED is defined and substituted, and corresponds to the
+# value of the --enable-code-coverage option, which defaults to being
+# disabled.
+#
+# Test also for gcov program and create GCOV variable that could be
+# substituted.
+#
+# Note that all optimization flags in CFLAGS must be disabled when code
+# coverage is enabled.
+#
+# Usage example:
+#
+# configure.ac:
+#
+# AX_CODE_COVERAGE
+#
+# Makefile.am:
+#
+# include $(top_srcdir)/aminclude_static.am
+#
+# my_program_LIBS = ... $(CODE_COVERAGE_LIBS) ...
+# my_program_CPPFLAGS = ... $(CODE_COVERAGE_CPPFLAGS) ...
+# my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ...
+# my_program_CXXFLAGS = ... $(CODE_COVERAGE_CXXFLAGS) ...
+#
+# clean-local: code-coverage-clean
+# distclean-local: code-coverage-dist-clean
+#
+# This results in a "check-code-coverage" rule being added to any
+# Makefile.am which do "include $(top_srcdir)/aminclude_static.am"
+# (assuming the module has been configured with --enable-code-coverage).
+# Running `make check-code-coverage` in that directory will run the
+# module's test suite (`make check`) and build a code coverage report
+# detailing the code which was touched, then print the URI for the report.
+#
+# This code was derived from Makefile.decl in GLib, originally licensed
+# under LGPLv2.1+.
+#
+# LICENSE
+#
+# Copyright (c) 2012, 2016 Philip Withnall
+# Copyright (c) 2012 Xan Lopez
+# Copyright (c) 2012 Christian Persch
+# Copyright (c) 2012 Paolo Borelli
+# Copyright (c) 2012 Dan Winship
+# Copyright (c) 2015,2018 Bastien ROUCARIES
+#
+# This library is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or (at
+# your option) any later version.
+#
+# This library is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
+
+#serial 37
+
+m4_define(_AX_CODE_COVERAGE_RULES,[
+AX_ADD_AM_MACRO_STATIC([
+# Code coverage
+#
+# Optional:
+# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
+# Multiple directories may be specified, separated by whitespace.
+# (Default: \$(top_builddir))
+# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
+# by lcov for code coverage. (Default:
+# \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage.info)
+# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
+# reports to be created. (Default:
+# \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage)
+# - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage,
+# set to 0 to disable it and leave empty to stay with the default.
+# (Default: empty)
+# - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov
+# instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
+# - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov
+# instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
+# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov
+# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the
+# collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
+# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov
+# instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
+# - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering
+# lcov instance. (Default: empty)
+# - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov
+# instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
+# - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the
+# genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
+# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
+# instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
+# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
+#
+# The generated report will be titled using the \$(PACKAGE_NAME) and
+# \$(PACKAGE_VERSION). In order to add the current git hash to the title,
+# use the git-version-gen script, available online.
+# Optional variables
+# run only on top dir
+if CODE_COVERAGE_ENABLED
+ ifeq (\$(abs_builddir), \$(abs_top_builddir))
+CODE_COVERAGE_DIRECTORY ?= \$(top_builddir)
+CODE_COVERAGE_OUTPUT_FILE ?= \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage.info
+CODE_COVERAGE_OUTPUT_DIRECTORY ?= \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage
+
+CODE_COVERAGE_BRANCH_COVERAGE ?=
+CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= \$(if \$(CODE_COVERAGE_BRANCH_COVERAGE),\
+--rc lcov_branch_coverage=\$(CODE_COVERAGE_BRANCH_COVERAGE))
+CODE_COVERAGE_LCOV_SHOPTS ?= \$(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
+CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool \"\$(GCOV)\"
+CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= \$(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
+CODE_COVERAGE_LCOV_OPTIONS ?= \$(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
+CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?=
+CODE_COVERAGE_LCOV_RMOPTS ?= \$(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
+CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\
+\$(if \$(CODE_COVERAGE_BRANCH_COVERAGE),\
+--rc genhtml_branch_coverage=\$(CODE_COVERAGE_BRANCH_COVERAGE))
+CODE_COVERAGE_GENHTML_OPTIONS ?= \$(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
+CODE_COVERAGE_IGNORE_PATTERN ?=
+
+GITIGNOREFILES := \$(GITIGNOREFILES) \$(CODE_COVERAGE_OUTPUT_FILE) \$(CODE_COVERAGE_OUTPUT_DIRECTORY)
+code_coverage_v_lcov_cap = \$(code_coverage_v_lcov_cap_\$(V))
+code_coverage_v_lcov_cap_ = \$(code_coverage_v_lcov_cap_\$(AM_DEFAULT_VERBOSITY))
+code_coverage_v_lcov_cap_0 = @echo \" LCOV --capture\" \$(CODE_COVERAGE_OUTPUT_FILE);
+code_coverage_v_lcov_ign = \$(code_coverage_v_lcov_ign_\$(V))
+code_coverage_v_lcov_ign_ = \$(code_coverage_v_lcov_ign_\$(AM_DEFAULT_VERBOSITY))
+code_coverage_v_lcov_ign_0 = @echo \" LCOV --remove\" \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \$(CODE_COVERAGE_IGNORE_PATTERN);
+code_coverage_v_genhtml = \$(code_coverage_v_genhtml_\$(V))
+code_coverage_v_genhtml_ = \$(code_coverage_v_genhtml_\$(AM_DEFAULT_VERBOSITY))
+code_coverage_v_genhtml_0 = @echo \" GEN \" \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\";
+code_coverage_quiet = \$(code_coverage_quiet_\$(V))
+code_coverage_quiet_ = \$(code_coverage_quiet_\$(AM_DEFAULT_VERBOSITY))
+code_coverage_quiet_0 = --quiet
+
+# sanitizes the test-name: replaces with underscores: dashes and dots
+code_coverage_sanitize = \$(subst -,_,\$(subst .,_,\$(1)))
+
+# Use recursive makes in order to ignore errors during check
+check-code-coverage:
+ -\$(AM_V_at)\$(MAKE) \$(AM_MAKEFLAGS) -k check
+ \$(AM_V_at)\$(MAKE) \$(AM_MAKEFLAGS) code-coverage-capture
+
+# Capture code coverage data
+code-coverage-capture: code-coverage-capture-hook
+ \$(code_coverage_v_lcov_cap)\$(LCOV) \$(code_coverage_quiet) \$(addprefix --directory ,\$(CODE_COVERAGE_DIRECTORY)) --capture --output-file \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" --test-name \"\$(call code_coverage_sanitize,\$(PACKAGE_NAME)-\$(PACKAGE_VERSION))\" --no-checksum --compat-libtool \$(CODE_COVERAGE_LCOV_SHOPTS) \$(CODE_COVERAGE_LCOV_OPTIONS)
+ \$(code_coverage_v_lcov_ign)\$(LCOV) \$(code_coverage_quiet) \$(addprefix --directory ,\$(CODE_COVERAGE_DIRECTORY)) --remove \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \$(CODE_COVERAGE_IGNORE_PATTERN) --output-file \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \$(CODE_COVERAGE_LCOV_SHOPTS) \$(CODE_COVERAGE_LCOV_RMOPTS)
+ -@rm -f \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\"
+ \$(code_coverage_v_genhtml)LANG=C \$(GENHTML) \$(code_coverage_quiet) \$(addprefix --prefix ,\$(CODE_COVERAGE_DIRECTORY)) --output-directory \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\" --title \"\$(PACKAGE_NAME)-\$(PACKAGE_VERSION) Code Coverage\" --legend --show-details \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \$(CODE_COVERAGE_GENHTML_OPTIONS)
+ @echo \"file://\$(abs_builddir)/\$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html\"
+
+code-coverage-clean:
+ -\$(LCOV) --directory \$(top_builddir) -z
+ -rm -rf \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\"
+ -find . \\( -name \"*.gcda\" -o -name \"*.gcno\" -o -name \"*.gcov\" \\) -delete
+
+code-coverage-dist-clean:
+
+A][M_DISTCHECK_CONFIGURE_FLAGS := \$(A][M_DISTCHECK_CONFIGURE_FLAGS) --disable-code-coverage
+ else # ifneq (\$(abs_builddir), \$(abs_top_builddir))
+check-code-coverage:
+
+code-coverage-capture: code-coverage-capture-hook
+
+code-coverage-clean:
+
+code-coverage-dist-clean:
+ endif # ifeq (\$(abs_builddir), \$(abs_top_builddir))
+else #! CODE_COVERAGE_ENABLED
+# Use recursive makes in order to ignore errors during check
+check-code-coverage:
+ @echo \"Need to reconfigure with --enable-code-coverage\"
+# Capture code coverage data
+code-coverage-capture: code-coverage-capture-hook
+ @echo \"Need to reconfigure with --enable-code-coverage\"
+
+code-coverage-clean:
+
+code-coverage-dist-clean:
+
+endif #CODE_COVERAGE_ENABLED
+# Hook rule executed before code-coverage-capture, overridable by the user
+code-coverage-capture-hook:
+
+.PHONY: check-code-coverage code-coverage-capture code-coverage-dist-clean code-coverage-clean code-coverage-capture-hook
+])
+])
+
+AC_DEFUN([_AX_CODE_COVERAGE_ENABLED],[
+ AX_CHECK_GNU_MAKE([],[AC_MSG_ERROR([not using GNU make that is needed for coverage])])
+ AC_REQUIRE([AX_ADD_AM_MACRO_STATIC])
+ # check for gcov
+ AC_CHECK_TOOL([GCOV],
+ [$_AX_CODE_COVERAGE_GCOV_PROG_WITH],
+ [:])
+ AS_IF([test "X$GCOV" = "X:"],
+ [AC_MSG_ERROR([gcov is needed to do coverage])])
+ AC_SUBST([GCOV])
+
+ dnl Check if gcc is being used
+ AS_IF([ test "$GCC" = "no" ], [
+ AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage])
+ ])
+
+ AC_CHECK_PROG([LCOV], [lcov], [lcov])
+ AC_CHECK_PROG([GENHTML], [genhtml], [genhtml])
+
+ AS_IF([ test x"$LCOV" = x ], [
+ AC_MSG_ERROR([To enable code coverage reporting you must have lcov installed])
+ ])
+
+ AS_IF([ test x"$GENHTML" = x ], [
+ AC_MSG_ERROR([Could not find genhtml from the lcov package])
+ ])
+
+ AC_CHECK_LIB([gcov], [_gcov_init], [CODE_COVERAGE_LIBS="-lgcov"], [CODE_COVERAGE_LIBS=""])
+
+ dnl Build the code coverage flags
+ dnl Define CODE_COVERAGE_LDFLAGS for backwards compatibility
+ CODE_COVERAGE_CPPFLAGS="-DNDEBUG"
+ CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
+ CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
+
+ AC_SUBST([CODE_COVERAGE_CPPFLAGS])
+ AC_SUBST([CODE_COVERAGE_CFLAGS])
+ AC_SUBST([CODE_COVERAGE_CXXFLAGS])
+ AC_SUBST([CODE_COVERAGE_LIBS])
+])
+
+AC_DEFUN([AX_CODE_COVERAGE],[
+ dnl Check for --enable-code-coverage
+
+ # allow to override gcov location
+ AC_ARG_WITH([gcov],
+ [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])],
+ [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov],
+ [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov])
+
+ AC_MSG_CHECKING([whether to build with code coverage support])
+ AC_ARG_ENABLE([code-coverage],
+ AS_HELP_STRING([--enable-code-coverage],
+ [Whether to enable code coverage support]),,
+ enable_code_coverage=no)
+
+ AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test "x$enable_code_coverage" = xyes])
+ AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage])
+ AC_MSG_RESULT($enable_code_coverage)
+
+ AS_IF([ test "x$enable_code_coverage" = xyes ], [
+ _AX_CODE_COVERAGE_ENABLED
+ ])
+
+ _AX_CODE_COVERAGE_RULES
+])