@@ -218,7 +218,7 @@
uint8_t challenge[8], ntlm_response[24];
int i, ret_val;
- uint8_t ntlmv2_response[144];
+ uint8_t ntlmv2_response[256];
char userdomain_u[256]; /* for uppercase unicode username and domain */
char userdomain[128]; /* the same as previous but ascii */
uint8_t ntlmv2_hash[MD5_DIGEST_LENGTH];
@@ -270,17 +270,15 @@
* the missing bytes will be NULL, as buf2 is known to be zeroed
* when this decode happens.
*/
- uint8_t buf2[128]; /* decoded reply from proxy */
+ uint8_t buf2[512]; /* decoded reply from proxy */
CLEAR(buf2);
ret_val = openvpn_base64_decode(phase_2, buf2, -1);
if (ret_val < 0)
{
+ msg(M_WARN, "NTLM: base64 decoding of phase 2 response failed");
return NULL;
}
- /* we can be sure that phase_2 is less than 128
- * therefore buf2 needs to be (3/4 * 128) */
-
/* extract the challenge from bytes 24-31 */
for (i = 0; i<8; i++)
{
@@ -300,7 +298,7 @@
}
else
{
- msg(M_INFO, "Warning: Username or domain too long");
+ msg(M_WARN, "NTLM: Username or domain too long");
}
unicodize(userdomain_u, userdomain);
gen_hmac_md5((uint8_t *)userdomain_u, 2 * strlen(userdomain), md4_hash,
@@ -335,9 +333,10 @@
if ((flags & 0x00800000) == 0x00800000)
{
tib_len = buf2[0x28]; /* Get Target Information block size */
- if (tib_len > 96)
+ if (tib_len + 0x1c + 16 > sizeof(ntlmv2_response))
{
- tib_len = 96;
+ msg(M_WARN, "NTLM: target information buffer too long for response (len=%d)", tib_len);
+ return NULL;
}
{
@@ -345,6 +344,7 @@
uint8_t tib_pos = buf2[0x2c];
if (tib_pos + tib_len > sizeof(buf2))
{
+ msg(M_ERR, "NTLM: phase 2 response from server too long (need %d bytes at offset %u)", tib_len, tib_pos);
return NULL;
}
/* Get Target Information block pointer */
@@ -638,7 +638,6 @@
{
struct gc_arena gc = gc_new();
char buf[512];
- char buf2[129];
char get[80];
int status;
int nparms;
@@ -758,7 +757,7 @@
{
#if NTLM
/* look for the phase 2 response */
-
+ char buf2[512];
while (true)
{
if (!recv_line(sd, buf, sizeof(buf), get_server_poll_remaining_time(server_poll_timeout), true, NULL, signal_received))
@@ -768,9 +767,9 @@
chomp(buf);
msg(D_PROXY, "HTTP proxy returned: '%s'", buf);
- openvpn_snprintf(get, sizeof get, "%%*s NTLM %%%ds", (int) sizeof(buf2) - 1);
+ CLEAR(buf2);
+ openvpn_snprintf(get, sizeof(get), "%%*s NTLM %%%zus", sizeof(buf2) - 1);
nparms = sscanf(buf, get, buf2);
- buf2[128] = 0; /* we only need the beginning - ensure it's null terminated. */
/* check for "Proxy-Authenticate: NTLM TlRM..." */
if (nparms == 1)
Attention is currently required from: plaisthos. Hello plaisthos, I'd like you to do a code review. Please visit http://gerrit.openvpn.net/c/openvpn/+/494?usp=email to review the following change. Change subject: NTLM: increase size of phase 2 response we can handle ...................................................................... NTLM: increase size of phase 2 response we can handle With NTLMv2 the target information buffer can be rather large even with normal domain setups. In my test setup it was 152 bytes starting at offset 71. Overall the base64 encode phase 2 response was 300 byte long. The linked documentation has 98 bytes at offset 60. 128 byte is clearly too low. While here improve the error messaging, so that if the buffer is too small at least one can determine that in the log. Change-Id: Iefa4930cb1e8c4135056a17ceb4283fc13cc75c8 Signed-off-by: Frank Lichtenheld <frank@lichtenheld.com> --- M src/openvpn/ntlm.c M src/openvpn/proxy.c 2 files changed, 11 insertions(+), 12 deletions(-) git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/94/494/1