[Openvpn-devel,1/2] networking: add and implement net_addr_ll_set() API
Commit Message
When running in TAP mode we may need to set the LL address of the
interface, if requested by the user.
This operation was overlooked when implementing the networking API and
it still relies on iproute/net-tools being installed.
Basically this means that when compiling OpenVPN on a system without
iproute2/net-tools and the user uses the "lladdr" config directive,
OpenVPN will fail to se the LL address of the interface.
With this patch a new API is introduced and it is implemented for both
SITNL and iproute2 backends.
Reported-by: Jan Hugo Prins <jprins@betterbe.com>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
---
src/openvpn/misc.h | 7 +++++++
src/openvpn/networking.h | 12 +++++++++++
src/openvpn/networking_iproute2.c | 21 +++++++++++++++++++
src/openvpn/networking_sitnl.c | 35 +++++++++++++++++++++++++++++++
4 files changed, 75 insertions(+)
Comments
HI,
On Fri, Sep 03, 2021 at 06:11:12PM +0200, Antonio Quartulli wrote:
> Reported-by: Jan Hugo Prins <jprins@betterbe.com>
Jan Hugo, have you been able to test these two patches?
I could set up a test rig myself, but since I do not experience the issue,
it's always more useful if an affected user reports "yes, it works for
me now" :-)
gert
Acked-by: Gert Doering <gert@greenie.muc.de>
This basically does not give me much to test, as it just adds functions
that are not called yet. Those look reasonable, and the result passes
compilation on Linux and FreeBSD.
I do not like the "MAC_FMT" bit very much - it looks like "yeah, I saw
this in another project, and it looks cool", but it introduces an extra
"what is it doing here?" for the two cases where it is used (and the
extra _STRINGIFY() does not help make it easier to follow). But we
discussed this on IRC, and seems we need to disagree here...
NOTE: I accidentially pushed out v1 of the patch, with the "wrong"
brackets. We'll sort this out.
NOTE2: this is a bugfix (omission), so it is intended to go to
release/2.5 as well - but with the wrong patch merged to master, I
think I'll just get them all in, and then squash together the 3
patches into a single one for 2.5.
Your patch has been applied to the master branch.
commit 98f524cbd58d24d09dee26160d7386d710c3564f
Author: Antonio Quartulli
Date: Fri Sep 3 18:11:12 2021 +0200
networking: add and implement net_addr_ll_set() API
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Acked-by: Gert Doering <gert@greenie.muc.de>
Message-Id: <20210903161113.30498-1-a@unstable.cc>
URL: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg22792.html
Signed-off-by: Gert Doering <gert@greenie.muc.de>
--
kind regards,
Gert Doering
@@ -211,4 +211,11 @@ get_num_elements(const char *string, char delimiter);
struct buffer
prepend_dir(const char *dir, const char *path, struct gc_arena *gc);
+#define _STRINGIFY(S) #S
+#define MAC_FMT _STRINGIFY(%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx)
+#define MAC_PRINT_ARG(_mac) _mac[0], _mac[1], _mac[2], \
+ _mac[3], _mac[4], _mac[5]
+#define MAC_SCAN_ARG(_mac) &_mac[0], &_mac[1], &_mac[2], \
+ &_mac[3], &_mac[4], &_mac[5]
+
#endif /* ifndef MISC_H */
@@ -103,6 +103,18 @@ int net_iface_up(openvpn_net_ctx_t *ctx, const openvpn_net_iface_t *iface,
int net_iface_mtu_set(openvpn_net_ctx_t *ctx,
const openvpn_net_iface_t *iface, uint32_t mtu);
+/**
+ * Set the Link Layer (Ethernet) address of the TAP interface
+ *
+ * @param ctx the implementation specific context
+ * @param iface the interface to modify
+ * @param addr the new address to set (expected ETH_ALEN bytes (6))
+ *
+ * @return 0 on success, a negative error code otherwise
+ */
+int net_addr_ll_set(openvpn_net_ctx_t *ctx, const openvpn_net_iface_t *iface,
+ uint8_t *addr);
+
/**
* Add an IPv4 address to an interface
*
@@ -93,6 +93,27 @@ net_iface_mtu_set(openvpn_net_ctx_t *ctx, const char *iface, uint32_t mtu)
return 0;
}
+int
+net_addr_ll_set(openvpn_net_ctx_t *ctx, const openvpn_net_iface_t *iface,
+ uint8_t *addr)
+{
+ struct argv argv = argv_new();
+ int ret = 0;
+
+ argv_printf(&argv,
+ "%s link set addr " MAC_FMT " dev %s",
+ iproute_path, MAC_PRINT_ARG(addr), iface);
+
+ argv_msg(M_INFO, &argv);
+ if (!openvpn_execve_check(&argv, ctx->es, M_WARN,
+ "Linux ip link set addr failed"))
+ ret = -1;
+
+ argv_free(&argv);
+
+ return ret;
+}
+
int
net_addr_v4_add(openvpn_net_ctx_t *ctx, const char *iface,
const in_addr_t *addr, int prefixlen)
@@ -30,6 +30,7 @@
#include "errlevel.h"
#include "buffer.h"
+#include "misc.h"
#include "networking.h"
#include <errno.h>
@@ -723,6 +724,40 @@ err:
return ret;
}
+int
+net_addr_ll_set(openvpn_net_ctx_t *ctx, const openvpn_net_iface_t *iface,
+ uint8_t *addr)
+{
+ struct sitnl_link_req req;
+ int ifindex, ret = -1;
+
+ CLEAR(req);
+
+ ifindex = if_nametoindex(iface);
+ if (ifindex == 0)
+ {
+ msg(M_WARN | M_ERRNO, "%s: rtnl: cannot get ifindex for %s", __func__,
+ iface);
+ return -1;
+ }
+
+ req.n.nlmsg_len = NLMSG_LENGTH(sizeof(req.i));
+ req.n.nlmsg_flags = NLM_F_REQUEST;
+ req.n.nlmsg_type = RTM_NEWLINK;
+
+ req.i.ifi_family = AF_PACKET;
+ req.i.ifi_index = ifindex;
+
+ SITNL_ADDATTR(&req.n, sizeof(req), IFLA_ADDRESS, addr, ETH_ALEN);
+
+ msg(M_INFO, "%s: lladdr " MAC_FMT " for %s", __func__, MAC_PRINT_ARG(addr),
+ iface);
+
+ ret = sitnl_send(&req.n, 0, 0, NULL, NULL);
+err:
+ return ret;
+}
+
static int
sitnl_addr_set(int cmd, uint32_t flags, int ifindex, sa_family_t af_family,
const inet_address_t *local, const inet_address_t *remote,